I have openldap server and i am authenticating with Redhat Directory Services(RHDS).I have confgured the RHDS for the user login giving /bin/bash as the login shell and joined the client machine using system-config-authentication.The user is able to login in connand line but below it gives the error :
"cannot find name for group id <id number>"
I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.
This is the common part:
Code:
AuthType Basic
AuthBasicProvider ldap anon
Order allow,deny
Allow from all
This part by itself works for the LDAP authentication:
Code:
AuthName "System Admins"
AuthLDAPURL "ldaps://example.com/ou=ldap,o=example.com?mail" SSL
Require ldap-group cn=SysAdmins,ou=memberlist,ou=groups,o=example.com
This part works by itself for guest access:
Code:
Anonymous guest
Anonymous_VerifyEmail Off
Anonymous_MustGiveEmail Off
Anonymous_LogEmail on
Require valid-user
But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?
I am facing login issues when i try to login as admin using phpldapadmin into ldap server. Installed phpldapadmin for administering ldap server from the repository:
1)[url]
2)yum install phpldapadmin
Able to see the default phpldapadmin login page.
ldapadmin throws the error as "Bad username/password.Please try again"
But when i login as anonymous i am able to login but the web page asks whether to create the root domain?
whether anything needs to be done for making it login as admin.
The details of my set up are as follows:
My slapd configuration:
Mount of filesystem failed. A maintenance shell will now be started CONTROL-D will terminate this shell and retry. groups: cannot find name for group ID 0 root@Sergioc-desktop:"#
View 2 Replies View RelatedI've installed Directory Server (LDAP). The setup has been done according to the tutorials online. Able to access the interface as well. So far so good. The issue I have is with permissions. I can assign file permissions to a user created in the Directory Server ( user not created on the local server). But the same can't be done for a group - alteast the way I currently see it. How could i assign file system rights to a group created in the directory server.
View 5 Replies View RelatedI've several servers (windows+linux) that authenticate to an LDAP server. There is one machine that I would like to allow only certain groups from LDAP server to have access and I am not sure where to start.
If that cannot be done, is it possible to disable LDAP root user to access these machines?
I'm trying to create a group called Domain Users, that will include several other groups that are populated with users inside of the LDAP database. In the LDAPdatabase, for a group entry, there are memberUid entries that can be filled. When I try to use another "Group" name, it just lists that name and not the people in that group. So if group "A" has Jim, John, Sue, and I include group "A" in the memberUid of the Domain Users group, I want that to reference the people in that group, not the group name. Testing access right, having the group name listed in "Domain Users" group, does not grant user access under the group rights on a directory. Should be simple, but I don't know the syntax to use for this reference.
View 2 Replies View Relatedi have configured ldapserver on rhel4 for creating address book
following are configuration files on ldap server
/etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
i am able to import this ldif file into database.also when i perform the ldapsearch on this server with command"ldapsearch �x �W �D �cn=manager, dc=example, dc =com� �b �dc=example, dc=com�" i get correct output.
but when i am trying to search from another client machine, i am getting "error ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)"
also when i configured address book on mozilla on server., it is working fine.but not working on another machine.is any configuration is missing on client machine.both ldap server and client are configured on rhel4es without any firewall or selinux.
I'm trying to set up a Linux server and I am new to this. I have gone through most of the configuration using SAMBA 3.0 and when I populate the ldap directory all I get this error before the password request:
Then when I perform an ldapsearch to see if the directory is populated I get this message:
I'm positive all my .conf files are done right.
In the past I found some great help on this forum, so here goes. Bare with me because it's a long story. I'll try to be as complete as possible. I've installed and configured OpenLdap on a virtual machine with ip 192.168.39.134. I've added 2 users via LAM. In the ou WikiUsers and the domain is wiki.local.
I've then created another host with ip 192.168.39.133 with mediawiki installed on it. Then I added the extension LDAPAuthenthication. In the LdapAuthentication file I added this code (only the last paragraph is mine, I added the others to show it's location in the script):
Quote:
$path = array( $IP, "$IP/includes", "$IP/languages" );
set_include_path( implode( PATH_SEPARATOR, $path ) . PATH_SEPARATOR . get_include_path() );
[code]...
I know I'm close because I can't register any new users or accounts on the mediawiki site. Although I could before I added the LDAP service. This is indeed all just to test and get to know how LDAP works. That's why it's all virtual in VMWare. I did not really configure anything on the LDAP, i just installed it and chose a domain (wiki.local).
I have a set of two amd64 machines with Debian Lenny. Machine 2 reads all the users' information from the Machine 1 through LDAP. Also, in Machine 2 I set up a dchroot environment for 32 bits compatibility ( following [URL]
In addition to the above instructions, on this Machine 2, I set up /etc/libnss*, /etc/ldap/*, and /etc/nsswitch.conf both for the amd64 and for the i386 environments. I have no problems if I'm in the native amd64 mode. However, once I enter the i386 dchroot, some strange things happen:
1) For users from uid=1000 to uid=1031, I get an error if running 'whoami' (Cannot find name for user ID XXXX) and if I run 'id' , I get all the correct group numbers but no translation to group names in parenthesis as it should be. 'ls -l' also only lists group numbers but no names.
2) for user 1032 I cannot even change into the dchroot, I get the error "E: Group '1,031' not found"
I installed CentOS 5.2 and then run yum update. I configured this server as LDAP/Samba primary domain controller. LDAP seems to be OK and for testing I am able to create users with:smbldap-tools useradd -am usernameI can ssh into the server as root and also as a Linux user which was locally created in the server. But ssh into the server as LDAP user fails (from a Fedora 11 machine) with "Permission denied, please try again", prompting again for password.Some data:
# rpm -qa | grep ldap
python-ldap-2.2.0-2.1
php-ldap-5.1.6-23.2.el5_3
[code]....
We use Cent OS 5.4 as a application server. We would like users to login the server via LDAP authentiction. We want ot use Lotus domino server as a LDAP server. What we should do? how can we configure ldap.conf file? Does anyone cofigured this method before ? when we configured OpenLdap on another CentoOs Server, we can successfully login to Application server. We would like to learn correct configuration on ldap.conf for authenticate via Lotus Domino Ldap server ASAP.
View 1 Replies View RelatedI am new to ldap. I've installed openldap server in a centos but yet to test it. My question is how to force user to login to the system using ldap instead of non-ldap login? For example, I created some users in the ldap server, these users are exist in /etc/passwd, when ssh login to server as user, it normally authenticates through /etc/passwd file without being forced to use ldap.
View 3 Replies View Relatedwhy i can't login on the ldap-client via ldap, so here is a short description of my machines (i use openvz virtualising)I have on the HN (Debian Lenny) 2 VE's, which are in the same subnet (192.168.1.0/24)The first VE (Hostname: ldap1, IP: 192.168.1.91) is the ldap-server, which is so configured, that i can manage the server via phpldapadmin.The second VE (Hostname: ftp1, IP: 192.168.1.31) is the ldap-client, there should run a sftp-server in the future and the sftp-server(ssh-server) should use ldap-usernames to login. on the ftp1, i get with this command getent passwd the users configured on the ldap-server, but with the command id USERNAME the result is, that the user doesn't exist. (USERNAME is this name, i get returned by getent) and if i try to login via ssh, i get permission denied. and because the machines are openvz-virtual-machines, so i can't login on them like on a normal system, but a su USERNAME doesn't work too, because the user is not known on the system.
my installation:
i don't think, that the ldap-server is the problem, because the phpldapadmin and getent on ftp1 are working perfectly, but if you want, i can post the config here too. the VE ftp1 was configured with the following how-to: [URL] and pam is configured like in the chapter "PAM setup with pam_ldap" on [URL]
Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
I noticed in Fedora that in Authenticate Configs ->Advanced, that there is an option to "Create home directories on the first login".I'd like to know if its possible to enable that through a text config file on a CentOS box that has ldap authentication enabled. Right now it's complaining that the home folder does not exist upon loggin with an ldap account.
View 1 Replies View RelatedI`am just trying to connect Samba with ldap to make it simpler for the users to log in. We have already attached squid, so by that we thought it would be easy to do the same with samba. I think we did something wrong with the ldap config for the os with is btw:
Quote:
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 1
We added
Quote:
ldap admin dn = cn=xxx,o=xxx
[Code]...
So I've configured ldap on Centos5 64 bit and I can run "ldap search" and "gentent passwd" on the client/server and it shows my users info.
But I can't login via the cli or GUI.
I can login by doing;
su - username
at the client or server but I can't login by issuing;
login username
or at the GUI login screen.
I am trying to deploy Kerberos and LDAP so users will be able to login in to a server on the edge of the LAN, and afterwards be able to establish a SSH connection to all the computers in that LAN without the need to type any passwords, and without the need for me to manage SSH keys [beside the SSH keys on the login server] and local user accounts.
1. When i create the users in OpenLDAP i use a template that i created by reading documentation from the Internet. In the template one piece of information that is neede is the UID. Is there any clever way the keep track of the numbers so i do not assign the same UID to two users, besides using a pen and paper?
2. For the users to be able to establish SSH connections between the computers, the host is going to be added to the keytab like this: ktadd host/client.example.com Is is possible to replace client with something genric so i do not need to mange these keytab files between the hosts?
3. Users will be logging on the the server on the edge of LAN by using SSH keys. How can i configure the setup so the users will recieve a ticket automatically when the logon without executing kinit and without entering a password, just by having a valid SSH key?
4. krb5kdc is running on all the network interfaces in the server i want it to only run on eth1, how can this be done?
we have a weird problem with our opensuse 11.2 server installation.
We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.
This indeed already worked weeks ago until....this week.
Maybe some updates??!
I do not know what happend exactly. The server just does not want to start again and throws following error:
Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed
This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.
So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.
I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).
I've been trying to set up a Linux-only network and currently have a working DHCP, DNS, LDAP and NFS server, with a client that can authenticate with the LDAP server and a central /home folder.However, if I wanted to share folders on the NFS server, how would I make the share available to, for example, a particular group of users in the directory?I've never used NIS(+) on a network, but believe you can add a 'group' of users in the /etc/exports file--simples!Does anyone know of the best way to do it (even better anyone who is doing this in a production environment)?
View 5 Replies View RelatedI took to yast to install ldap. I creating the CA cert, server key and server cert and specified them during the yast ldap server dialogs.
The firewall is open for ldap.
I also went through yast's ldap client ... though I didn't exactly see to anything (presuably it wrote up a configuration file somewhere).
However when trying use the basic ldap tools, like ldapwhoami. Well it doesn't connect and gives me the above error. Of coure the ldap db is unpopulated as yet, so it probably is not able to say who am at all. But ldapadd doesn't work either.
It seems to point to my SSL usage not being correct .. so I'm trying to double check that now.
I have a remote server running Fedore Core 11 - 32bit. On a new install, I installed webmin (control panel). Now every time I want to install something I get the same error message:
root XXXXXX # yum groupinstall web server
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again.
I have installed webmin. I am configuring ldap server using webmin gui. when i try to add user by ldap user and group I get following error. Failed to save user; Failed to add user to ldap database; modification required authentication. I am new in ldap configuration and hope for best reply.
View 1 Replies View Relatedi have successful secure ldap replication but i could not make ldap client to direct its authentication to slave ldap
here is my config file on ldap client (i am not sure if it is the right place though)
ip : 192.168.1.183 is master ldap
ip : 192.168.1.185 is slave ldap
pico /etc/ldap/ldap.conf
#
# LDAP Defaults
code....
I'm checking with a sniffer and there's activity going on between the client and the LDAP server... as a matter of fact, the sniffer shows that the search is producing one ldap item, however, php says it can't contact the ldap server (after it has bound and everything):
The script is working beautifully on another host with debian.
I have used diff command in past.I faced a situation to which I did not had a cluehere are some text strings (which can be stored in a file)Quote:
CONFIG_XEN=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=128
[code]...
So I am creating a LDAP server for my school's Linux lab, so users on our school network can log into the Linux machines.
I found a guide here url...Authentication
But during the install, I get the following error.
update-rc.d: warning: libnss-ldap start runlevel arguments (2 3 4 5) do not match LSB Default-Start values (none)
can anyone tell me what is the difference between these two files of LDAP client /etc/ldap.conf and /etc/ldap/ldap.conf and for what purposes these two files gives services. Is it necessary to have these two files at a time ?
I use these files to install LDAP client to authenticate with our LDAP server by creating a symbolic link of /etc/ldap.conf to /etc/ldap/ldap.conf.