Why a usb touch screen device is not created on /dev? It can be detected on lsusb but no particular dev location like /dev/input/event0 or something like that. I've already updated my kernel for 5.6. do i need a driver to be able for this device to have a dev? No calibration tool works on this hardware. Same also on my tm u220 usb printer. It can be detected but no /dev/usb/lp0 being created.
View 1 RepliesWe are having issues with LVM on CentOS 5.4 both 32bit and 64bit on one particular machine. I just can't get my head around it. Usually a device in /dev/ is created when a LVM Volume Group is created. e.g. if you add a volume group called foo, you would have /dev/foo to work with to access LVs inside the volume group.
For some reason it's not being created. The udev service is running, the volume group is created ok, I cant see anything strange in logs or strace.
Recently, I created a device sc0 through device mapper. The divice could be found in /dev/mapper/sc0. My problem is that the device doesn't exist in /dev/partitions which will block my following test.BTW, I found dm-0 in /dev/partitions. Is it the same as /dev/mapper/sc0? But the device /dev/dm-0 doesn't exist!
View 2 Replies View RelatedI am on Ubuntu 9.10 and Will soon buy a ipod touch 4g. I would like to if there are any applications that could allow transferring songs to the device from Ubuntu?
View 1 Replies View RelatedI have the following webcam installed:Bus 001 Device 002: ID 5986:0241 Acer, Inc BisonCam, NB Pro The kernel (linux 2.6.32-5-686) successfully recognizes it. issuing lsmod shows:
[code]....
I have installed 1tb hard drive and would like to partition as follows:
1) / - 20g
2) /swap - 6G
3) /photos /150g
4) /videos /500g
5) /audio /300g
After 2-3 partition an extended partition automatically created in which I am not able to create specified capacity i.e., say I want 150g of /photos partition, the /videos partition is automatically reduced and a free space at the end appears. Some free space is always there which i am not able to understand. Nevertheless i clicked to create, but I get an error viz. 'device not created'.
I must say I've spent many nights trying to get this touch screen going on ubuntu but with no luck. Does anyone have any general step by step instructions or is there any sites I can go on. I have a Acer t230h and the furthest Ive got with it is typing something into the terminal and getting out aload of strange looking symbols and stuff. I presume that was in the right direction but i forget what I pressed... something like 'lbus' but longer I think. I have the touchscreen info plugged in with a usb lead so what ever their called in ubuntu might be a help. another thing I did find something related to the screen in the /dev/ folder by plugin it in and out a couple of times and spotting what file was missing and coming back but when I run it in terminal this is what happens - evan@ubuntu:~$ cat /dev/hidraw0 cat: /dev/hidraw0: Permission denied
View 7 Replies View Relatedi have just updated my system to the new 11.04 on my fujitsu siemens T5010, which supports both touch via a wacom pen and finger touch.It is nice to be able to use my finger on the screen as i can in windows, but it is a pain that i can't rest my hand on the screen while using the pen to draw something. Do you know how i could temporarily disable the touchscreen for anything but my pen? A keyboard command to disable/enable it would be great
View 1 Replies View RelatedI am running Ubuntu 10.10 on my HP tx 1000 and my touch screen is not working.
Can anybody point me in the right direction on this issue?
I have checked and as of right now can not find any topic on my problem. I purchased and installed a usb touch screen for my EEE PC 900 4GB hard drive. My problem is that my computer will not recognize the screen. When I go into the Systems Test, The USB touch is recognized, but that is it. Do I have to download drivers? (Even for a usb?) I went into the bios, and enabled the web-cam, which I have used for power. (I think) If any one can offer me some advice, I will be forever grateful. I would love to have this up and running for my husbands birthday, which is in 2 weeks. Could the problem be with the size of the hard drive? I am 98% sure I have it installed correctly. I have followed the instructions that were supplied.
View 5 Replies View RelatedI can not get the touchscreen to with ubuntu 1010 netbook are there any tutorials? i googled around but didn't find what i was looking for
View 1 Replies View RelatedI'm trying to get a touch screen working with Ubuntu 10.04LTS (32bit) //changed to 32 bit -it is a serial touchsceen, connected at /dev/ttyS0 ,i know that works because I get garbage in the terminal when I enable it. -before the screen used a 3m driver (I believe) in XP.
My knowledge of Linux is passive so I generally pick up something when I need it. To get this working I came accross a lot of tutorials (a lot outdated a bit), I'm still at a loss to get this work.
I'm not sure where to put linux drivers (/usr/ or /dev/?) most tutorials kind of skip over that part. I have tried editing the /etc/X11/xorg.conf unsuccessfully. I'm not sure what the syntax for that is supposed to be.
I have a Fujitsu P1610 convertible running 9.10. I only like the two bars visible when I need them otherwise they just take up valuable screen space, especially on a 8.9" screen.
My problem is I cannot make the bars come up by moving the cursor via my finger. It works fine if I move the pointer via a mouse but that is not an option when in tablet mode. How can I make them come up when I move the cursor to their location via my finger?
I have followed literally half a dozen How-to's, and none work. The touch screen works like a mouse (I can "click" on things), but no two-finger functionality
View 4 Replies View RelatedI'm running a Fujitsu Lifebook T5010 with Linux Fedora Release 12 and the mouse is way too sensitive, jumps all over the screen when I touch it, especially if 2 fingers touch at the same time. I've tried all the system settings and nothing helps. It works fine with Windows XP Professional.
View 2 Replies View Related trying all sorts of xorg.conf settings and searching out drivers. Out of the box, Debian moves the cursor when I touch the screen and move my finger across it. The only problem is that it doesn't process it correctly. It is moving faster, so it doesn't stay under it. It also doesn't land under my finger when I touch the screen.I am running a Panasonic Toughbook CF-29.Driver I am trying: evtouchHere is my current xorg.conf: Code: # xorg.conf (X.Org X Window System server
configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
[code]....
I've try ubuntu lucid in DELL Inspiron, but touchscreen utilities is not run.
How can repair it.
Can anyone recommend a Touch Screen Monitor that is compatible with linux, are most touch screens compatible? I'm assuming they would just use the touch input the same as a mouse.
I'm not looking for multi-touch or anything extra-fancy.
I want to install tomcat so i followed the steps mentioned in below link: [URL] After going through the steps i checked for
Code:
./startup.sh
but it showed me the error
Code:
touch: cannot touch `/usr/share/apache-tomcat-6.0.32-src/logs/catalina.out': No such file or directory
/usr/share/apache-tomcat-6.0.32-src/bin/catalina.sh: line 372: /usr/share/apache-tomcat-6.0.32-src/logs/catalina.out: No such file or directory
when i went through my "/usr/share/apache-tomcat-6.0.32-src/" there was no "logs" folder so i tried
Code:
find / -name catalina.out
but it returned nothing.BTW i have installed "apache-tomcat-6.0.32-src", "java-1.6.0". Please if any one could look into the problem and provide me the solution to error mentioned above and why there is no "logs" directory in "/usr/share/apache-tomcat-6.0.32-src/".
I have been working for a few days to try to get a PIX CIR touch screen working. I discovered what it was by running:
Code:
lsusb -v
and looking for the identifier
[code]....
I have an HP Pavilion tx2000 tablet, wich is working perfectly in Ubuntu 10.04. The touch and the stylus works out of box, and i'm using the script that Favux has posted to rotate my screen and i've installed the wacomrotate daemon, wich is working too. Now, I've two questions: How to calibrate it? The stylus is ok, but the touch isn't calibrated. In Karmic, I was using wacomcpl and xsetwacom, but neither of them detect my tablet now (in 9.10, Hal was used to detect the tablet, now it's xserver-xorg-input-wacom).
[code]...
It's possible to set up the automatic screen rotation, like in Windows (the screen rotates automaticaly in tablet position)?
I have found a few topics that touch on the problem I'm having but the solution won't work for me.
I am running a 800x480 desktop with Gnome, many windows are cut off at the bottom and I cannot click on the buttons. The standard reply to this problem seems to be hold alt and left click drag the window up.
That works just fine, the twist here is I'm accessing the desktop through a touch-screen (via vnc on an android phone) and I don't have an alt button to hold, dragging is also kind of tough.. I realize it may just be the limitations of my device, but it can't hurt to ask!
I have bought a device with 10.1" capacitive touch screen. I have tried OpenSuse Milestone 5 (future release). It works great, but...My capacitive touch screen positioning cursor correctly but when I touch screen, it is like I clicking mouse for 9 times. One touch of icon of a program... and it opens it 9 times. I looked in hardware information in yast and the name of my touch panel in the following:
UNITEC Touch Panel (Win7)
Vendor number: 205437
It works good, but not useful, because I cannot really touch any icon with my finger, it will open it 9 times...
I've searched all over the internet for a usable touch screen friendly music player and have found nothing for Ubuntu. It doesn't matter to me if it's just a skin over an existing well known player or a complete application written from the ground up. This is for a car pc. I have been on MP3Car and I have still not found anything usable for GNU linux. The only component I need to complete my project is a good touch screen music player.
View 4 Replies View RelatedI have a 3rd party driver that is trying to install a touch screen driver, it is looking in /etc/X11 for xorg.conf and it isnt there. The Ubuntu docs pointed me at a diff folder which also didn't contain xorg.conf. c is it located? I will just sym link it during install them remove the link once its done. EDIT: Should probably mention that I'm running ubuntu 10.10 (Which was upgraded from 10.04). And I'm running Desktop Edition
[Code]...
I have been trying to install centos5.3 with an remote hdd (via ISCSI with Intel Nic and remote iscsi boot). If I install the centos with default partitioning (LVM, just /, swap,and /boot partitions), everything installs fine. However, if I install with custom partitions, particularly putting /var and /usr in their own partitions, I get all sorts of error during reboots. It tells me that the system cannot touch a couple files (in /var and /usr) because they do no exist. However, after boot, I can see these files and they existThe following files I can see so far that are being reported missing at boot are:
/var/run/getkey_done
/var/log/dmesg
/var/lock/subsys/kudzu
[code]....
I would like to use as much FOSS as possible, particularly with touch screen computers. Is it possible to run Ubuntu with touch and/or multi touch capabilities? If so, will an HP Touch Smart computer run Ubuntu? I would very much like to purchase said machine via Linux Foundation discounts if this is the case.
View 2 Replies View RelatedI installed CentOS 5.2 and it was fine. Later I installed some third party applications. Is this possible to create again ISO image from this install? Or alternatively how one rpm package can be added to the CentOS iso cds.
View 2 Replies View RelatedHow can I tell screen to always show created virtual console names in the bottom. I am using Ubuntu.
View 1 Replies View Relatedfiles and directories are NOT being created with consistent ownership and permissions: when created via Samba, they are created with user/group = nobody, and when created via the OS, they are being created with user/group = root.This causes problems with our automated tools that access the server (via Samba) and do a variety of file system operations (which need root privileges).How do I cofigure Samba so files/directories are created with user/group = root?
View 3 Replies View Related