Applications :: Fax Documents Direct From Computer?
Apr 16, 2010if somebody knows of a new software that I can install on my linux systems that would allow me to send documents from my computer to a fax machine to other offices.
View 5 Repliesif somebody knows of a new software that I can install on my linux systems that would allow me to send documents from my computer to a fax machine to other offices.
View 5 RepliesIs there a console based applications (/ script) for viewing PDF documents? pdftk can convert, but a cool program, maybe it exists.
View 3 Replies View RelatedHow can I change the mountpoint of my partition /media/documents to /documents.This is a partition of sdb and a fixed disk.The reason is that /media/ sometimes creates ghostdirectories while /Windows/C never does so, programmes writing/reading from this partition therfore don't work if a ghostdir_ exists.(BTW Suse is on sdb5 and sdb6. on sda is windows and used to be Ubuntu, the Suse-swap is sda5. Windows is out of use.)
View 4 Replies View RelatedI can access my windows my documentsmusic by mounting my windows drive and browsing to it. I can then playwatch my movies and pics in Ubuntu.But what I really want to be able to do is re-map the Ubunbu docs folder like so:
Ubuntu Pics = Windows My Documents pics.
Ubuntu Videos = Windows My Documents Videos.
I'm not very unix savy so I've been using Ubuntu tweak PersonalDefault Folder Locations setting and browsing to my Windows folders. But it doesn't work.I have managed to make a desktop 'short cut' and that works but I'd rather set the system wide default document folders.
When he saved doucuments in the opens source word processor as a MS Word document, he can't open it. Didn't had this problem until today.
View 2 Replies View RelatedAcouple of times now, my computer has frozen while I had firefox and eclipse open. when i restart it, firefox will not run because it is under the impression that it is already running; eclipse will start up, but does not allow me to access the necessary workspace because it is under the impression that it is still in use. how can i get rid of these problems? i tried pkill for firefox, but it does not show up on the list of processes running...
View 1 Replies View RelatedHow to launch the gui applications on remote computer(The application should be displayed on the remote computer, not on the computer from which command is given).
View 4 Replies View RelatedI have an ssh question that I have not been able to figure out.
I am sitting in front of computer A on computer B I would like to start mplayer and have it display a movie on computer B's screen. I think a better question might be how do I start a gui application and the Desktop on a remote computer threw ssh.
I haven't used Ubuntu for a while, and just reinstalled it. I have one major dislike about the new version, There are several applications I click on and it takes me to the installer.How do I remove those types of applications or just install them all?
View 3 Replies View Related./ before a command to excute it. Why can't I use direct command? What should I do so I don't have to type ./ before a command. I couldn't find any thread relating to this issue so I post it here. Could someone please explain this and tell me what to do.
View 14 Replies View RelatedHow to re-direct image
View 1 Replies View RelatedI feel shy asking this question but, 90% of the applications I install in Ubuntu (last release), do not show up later on in the applications menu, so I cant run them. I know it seems silly, but I can't find the way to handle this inconvenience. Is there a place (like Start> All programs in Windows), were I could find and run all the programs I install?
View 1 Replies View RelatedSo I have been struggling to make this happen for a bit and cannot figure it out. I want to communicate directly from my non-GUI Debian to my Puppy Linux PC. I have set up my Puppy PC for direct connection as per the instructions in the network wizard. I need to set up my Debian to do the same.
I have done the
auto eth0
iface eth0 inet static
address 192.168.0.100
netmask 255.255.255.0
in /etc/network/interfaces.
I still cannot ping the Debian machine from the Puppy one. Are there any other steps to the direct connection? (I already have the crossover cable in place)
I have also tried this with both PCs connected to a Netgear router. I CAN connect to the debian machine if it is on the router at the IP I assigned it and the Puppy PC is configured to use the router.
Is there a file I can edit or a process I can turn off? I think it's close I am just not sure what I am missing.
I Have Simple Proplem I Have Upuntu 9.10 And I Need to Update this vesion to 10.10 Direct is there a way to do this
View 1 Replies View RelatedHow do I install programs from CD or files I've doanload (linux) google earth.
View 1 Replies View RelatedI need to re-direct the output within an awk script, but not to already known, fixed filenames. The output file names depend on values of the fields. For example (the actual problem is surely more complicated), if, on a given line, the second field is DATA, the third is 1984, I would like to print some information in a file called output_DATA_1984. This could/would change in the following line of the same input file. Such things are pretty easy in bash, put I cannot do it in awk, as I can only find manual references for redirecting output to fixed filenames between double quotes.
View 2 Replies View RelatedI wrote a script which will run in ubuntu box and will display in tty1, without loading the gdm. The problem is when I plugged in a usb drive it will cause some messages to be printed into the current tty user logged in.
Like : [sdb] Assuming drive cache: write through
This is really disturbing when a user is running the script. Is there anyway that I can direct all the messages to some other tty which I don't use.
How can one have direct access to key strikes. Normally the key strikes that collected by the concerned programme and access to the same is not available to any other user programs. I am trying to write a program to simultaneously catch the key strikes. Obviously for this would require a low-level access to the keyboard. How can one do it ?
View 2 Replies View RelatedI have a single board computer previously running DOS. I recently made Linux running on it. Now that the system is running Linux, I have to translate the code that was supported by DOS. The code has segments that allow direct access of memory mapped registers through the macro _MK_FP and do read/write. I have read that where DOS allows this kind of direct memory access, Linux does not. Is there a way to do this in Linux?
View 6 Replies View RelatedAny one using php program to direct lpt port print command, now i am creating one programe for mini shope that system having citizen CT-S4000 model.
View 2 Replies View Related[code]...
What/where is this eth0 interface? Is it possible I can direct PXE boot to use different interface?
I was wondering if there was any way to remove icons from the installed applications menu?I recently attempted to install GOG.com's Zork Anthology using Wine and when I de-installed, the icons for those files were still listed in installed applications. Is there anyway to delete them manually?
View 2 Replies View RelatedI'm setting up a large number of virtual machines, each with a basic set of about 30 applications. Obviously, I don't want to do everything manually so I'm looking for ways to automate this process. Multiple distributions (Ubuntu, Red Hat Ent., FreeBSD, CentOS, etc.) will be used, meaning I will have a few Ubuntu installs with the basic set of 30 applications, and multiple Red Hat installs with the same set, etc. So, I'm looking for advice on automating as much of this as I can, even if it means a new form of automation for each distro.
View 1 Replies View RelatedIs there a programmatic way to get the list of all installed applications on Linux.
Also, how can we get the application activities in Linux OS like running applications name, time of day when they started, duration till the applications were running on system, application version etc.
Is there a way to do this in C/C++.
I am building an app that runs like a daemon and fetches the applications status and sends it to the network admin for him to monitor the application usage pattern on the user computers in the network.
I have recently acquired a HP MSA 2040 san, which they say will work with Red Hat. But I'd much rather use Debian. It's attached to a Gen 9 DL360. I cannot get the OS to see the external drives. I hope it's just me mssing something.
I have told the DL360 to keep the external control in HBA mode, not RAID, not using the hosts RAID intelligence. I think I have set the MSA to offer a couple of disks as a virtual drive. I CAN see the drives in the BIOS boot menu for the DL360, though it doesn't show the virtual voilumes on the MSA, I cannot see the MSA virtual or physical drives once Debian is installed.
I have installed multipath-tools, and the SCSCi utilities.
But no luck seeing the drives.
I'm using fedora 11. I'd like to do some tests with direct IO (raw) devices. I have now raw(1) command. Yum fails to find a package providing raw. There's a /dev/rawctl and raw appears in /proc/devices. Where is it? (rpm?)
View 3 Replies View RelatedI am currently running OpenSuse 11.2 still having problems with sound, CD-burning and the like being a total newbie. But I am also a very curious person.
So my questions are: Is it
a) advisable to upgrade to the latest version when there are still problems to solve in the old version and after quite some work the most important functions are up and running
b) is it possible technically speaking to upgrade directly from 11.2 to 11.4 without risking too much.
I would like to plug my guitar on my pc and hear what I'm playing out of my headphones. I have not found out yet how I can enable direct output. Neither with Line-In, nor Mic-Input worked. Has anyone an idea how to enable it? KMix does not provide such a function as far as I know
View 7 Replies View RelatedI've been able to get access to our Netgear NAS, I can browse it, copy files etc. just fine. But I don't have "direct access" in as far as, Open Office won't open any files residing on the NAS, neither can I save directly to the NAS form a program and when I get a "Browse for File" form field on a website (eg attachments in GMail etc.), I can't browse to the NAS either. My XP box does do all of this, either through my mapped network drive or even through browsing the network. How can I make openSuse 11.2 use the NAS with my login credentials as if it was a local disk?
View 4 Replies View RelatedI'm in the process of building a PC to run Ubuntu 10.04 and I want to use it (eventually) to with Direct TV. I just want to be able to use the PC as the DVR if possible. I'll accept the limitations, but I'm trying to do my homework to make it as easy as possible to use for my family.
I've started out with a BioStar M32 Micro ATX board and an Intel E5300 Dual Core Pentium 2.6Ghz processor, with 2Gigs of Kingston RAM. It runs pretty well, but I've got nothing installed yet (I'm dual booting with Windows Server 2003). Right now it's just in an old E Machines case with a new 500Gig toshiba SATA drive.
Is there a guide to what hardware I could get to work with Direct TV? Also, I'm not sure of what all is possible as far as integrating the two. If there is a guide, please let me know. Also, I would love to hear from anyone who is able to network or use Ubuntu with Direct TV.