Networking :: Can't Connect To Unsecured Wireless Ubuntu 10.04?
Sep 11, 2010
I can connect to any wireless network it seems other than the unsecured wireless network here at my college. As long as you register your mac address, which I did, connection should be fine. I have no issues connecting via ethernet, but I need the wireless also.The wireless controller is Intel Wireless WiFi Link 5300. I tried alternatives to the Network Manager and I've looked all over google which I haven't seen many issues, it should work fine.. not sure where to go from here.
View 5 Replies
ADVERTISEMENT
Sep 30, 2010
I am attempting to connect to an unsecured wireless network; I helped set it up for my local club with a local ISP. Once things were up and running I took my wife's laptop running Ubuntu 8.04.3 and Wicd. Can see the unsecured network no problem, good signal, hit connect, whirs away for awhile, then: 'Unable to obtain IP address.' Strange. I am about to give up and report back to the ISP when I think I might try one of the old Windows boxes in the computer room. Spots the network, hit connect, online, no problem.
So Windows connects fine, Ubuntu box can't get an IP though no doubt the router is trying to serve it one.
View 9 Replies
View Related
Jul 9, 2010
I have no problem with my wireless network at home, or visiting friends, but it won't connect to public, open, unsecured WiFi networks, eg hotels, trains, ships.I'm using Ubuntu v9.10, NetworkManager applet v0.7.996, on a Dell Inspiron 1750 laptop.If I left click on the NetworkManager, the available wireless networks are displayed and I can see the relevent open networks, named as expected and shown without the lock icon. I click on the relevent entry, watch a spinner for 30 seconds or so and then it drops off and I have no connection. This happens for "all" open connections.If I look at my defined Wireless Network Connections now, I can see, eg, "Auto Internet@Sea, Last used: never". Editing that connection:
[Wireless]
SSID: Internet@Sea
Mode: Infrastructure
[code]...
View 2 Replies
View Related
Feb 1, 2010
I am having an issue with a newly installed 9.10 version of Unbuntu. After a bit of fiddling about, I have found that the only way I can connect to my wireless network is if I unsecure the network. Is there any explaination for why it will not work with either WEP or WPA?
View 4 Replies
View Related
Feb 26, 2009
I normally connect to a free wireless project, and did have a Windows box until yesterday when I installed Fedora 10. When I was using Windows, I was able to connect to the unsecured wireless network. Now on Fedora 10, the wireless card is working and is able to pick up signals but the signal strengths are markedly decreased and I am unable to see the network which I usually connected to.I really don't want to go back to Windows.
View 12 Replies
View Related
Mar 9, 2011
I have an Aspire 7741z running Ubuntu 10.04 I just loaded the 32 bit version today, then did the Update manager (398 updates) Before the update everything worked fine. After the update, no wireless. Password & security is correct, all wireless setup is correct. Aside from my network, I do have access to a local hotel (next door) and I can always get into their unsecured guest network, that doesn't work either.
I believe it is the driver since I have loaded Ubintu 10.10 32 bit with the same reaction. It will connect when I put in the live disk, but not from the hard install. output from lspci
[Code]...
View 1 Replies
View Related
May 3, 2010
I took the plunge and made a clean install of 10.04 because it sounded cool (and it is, I like it!) and now I'm tied to a wall again I've gone through several of the broadcom wireless card tutorials on the forums and the only thing I've managed to get is a lit up wifi light. It's not detecting an active unsecured network several inches away, that has computers up and running on it... I'm perfectly willing to post more details as needed.
[Code]...
View 4 Replies
View Related
Jun 12, 2010
My wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
View 1 Replies
View Related
Nov 2, 2010
I am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies
View Related
Jan 10, 2011
in linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies
View Related
Jul 28, 2011
I have recently installed ubuntu 11.04 on my asus eeepc1005hab. And I've had problems with the wifi. I can connect via ethernet, but the wireless won't connect. I can see the connection, but my wifi never connects. I've tried many things but it still won't work.
View 9 Replies
View Related
May 5, 2011
wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
View 2 Replies
View Related
Jun 17, 2011
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies
View Related
Jun 30, 2011
I installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
View 2 Replies
View Related
May 14, 2010
Code:
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
[Code].....
I've read around blacklisting but I'm not sure on what I should be blacklisting really.
View 9 Replies
View Related
May 5, 2009
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
View 7 Replies
View Related
Feb 19, 2010
Crashed my windows XP OS and replaced it with UBUNTU 9.10 can get online with hard LAN but wireless is disabled tried to install OEM driver for the broadcom card but only ended up blacklisting what appears now to be the default drivers I need b43. card is Broadcom BCM 4318, ICH6 chipset. on a Gateway MX6128.ROCK ON!
View 2 Replies
View Related
Apr 14, 2010
Installed Ubuntu 10.4 Beta on my Asus Eee 901 (the old Windows XP got tired...) Nice install, BTW, but Networking does not work. I have a very run-of-the-mill Linksys wireless router, which uses WPA2 passord authentication on the wireless side. Ubuntu clearly does try to connect, but then asks me for the password again, repeated a few times and then gives up. The SSID is OK (same I use on my Windows machines) and the same for the password, so it must be something Ubuntu does to the password. Bug or operator error?
View 9 Replies
View Related
Apr 23, 2010
After playing around with 9.04 for several months and getting used to linux (I have tried several distros but like ubuntu the best), I decided to reinstall to have a clean system. My wireless has been working great using ndiswrapper. Now after re-install and updating the system, here is my problem. The USB Network Adapter is seen and the wireless network is seen but it never connects. It just keeps asking for the passphrase (I have WPA2 Personal turned on). I have tried turning off the wireless security but that doesn't seem to have any effect.
I have done the things I did before to get the wireless connecting - disabling the native driver (which doesn't work at all) as well as the broadcom drivers which seem to interfere with ndiswrapper. I also tried downloading and compiling the ralink native driver (v 2.3.0.0) but that didn't work.Here is the setup:PC with dual core processors running at 2 Ghz3 GB ramUbuntu 9.04Belkin N150 Enhanced Wireless RouterBelkin N150 Enhaced Wireless USB Network Adapter (uses the rt2870 driver.)
View 2 Replies
View Related
May 9, 2010
I install the Ubuntu 10.04 OS on to a new Mac computer. Everything seems to work fine except for my networking icon/system. When i open the network connection i can not connect to a wireless network. it doesn't show any wireless networks in the area. it will only work if i connect with a LAN cable to go online.
View 6 Replies
View Related
Jul 7, 2010
I am running Ubuntu 10.04 x86 on my netbook. When I try to connect to the office WLAN I get the usual "%SSID% Connection established" but my network status icon in the panel doesn't change.
I then go online and sometime it works sometimes it doesn't. When it does work it is extremely slow. My first though was maybe it is because the router is set in mixed mode, this wasn't the case as my router at home is mixed mode and works fine. Then I thought maybe its the DNS so I set the DNS address to 8.8.8.8 (googles open DNS server) - same thing, still slow.
Next I thougt it maybe an incombatability between ubuntu and the router, a collegue of mine uses ubuntu also (10.04 x86) and he has exactly the same problem.
When I connect to the router using a cat 5 I get a similar problem, the network status icon changes to connected but the connection is still extremely slow. I know it's not the line because pleanty of other PC's use the same connection and it's fine. Again when we try it on my collegues ubuntu machine its the same thing.
So at the moment I know its not my machine or the DNS or the WLAN
View 1 Replies
View Related
Sep 14, 2010
I'm a first time user of ubuntu and I am having huge issues getting my wireless to work. I've tried using the troubleshooting guide, but it says that it's already installed and to go to windows wireless drivers to install the .inf file. Problem is.. I can't find the file anywhere. When I type lspci into the terminal this is what it says: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
View 9 Replies
View Related
Oct 1, 2010
I just took the plunge again and purged Windows 7 from my desktop computer and replaced it with the Lucid Lynx
Now my problem is I was using "Internet Connection Sharing" in Windows 7 to let my laptop and netbook connect to the Internet via wireless. Now I don't have the option of sharing my Internet connection anymore as Ubuntu would require me to have two network interface devices to do this, thus I am trying to make my laptop and netbook connect to the DSL modem via the wireless AP (which is possible in Windows as my wife is doing it right now on her laptop).
How do I go about getting my laptop (running Lucid Lynx) and netbook (Lucid Lynx Netbook Remix) to connect to the DSL modem via a wireless connection?
View 9 Replies
View Related
Oct 8, 2010
i use madwifi as the wireless NCI driver, and it works fine in UBUNTU, but i wanna know how to connect to a specific AP via wireless tools such as "iwconfig, iwlist" in CLI
View 9 Replies
View Related
Nov 18, 2010
i purchased a lenovo laptop and i installed windows 7 first. after a week i installed ubuntu10.04 which is really very useful. but, i can't able to connect with wireless internet in ubuntu 10.04.
View 1 Replies
View Related
Feb 20, 2011
I installed Ubuntu on my laptop at a friend's house. After installing, I connected perfectly to their wireless network and lived quite happily for a few days. However, when I arrived home and tried to connect to my own network, my computer insisted that it couldn't connect. Although I'm sure I'm entering the right pass key, it keeps asking for the passkey ad nauseum.
View 4 Replies
View Related
Apr 29, 2011
Ive just installed ubuntu on an old laptop to bring it back to life after the windows bootup crawl was just annoying me.Installation has gone fine, but the problem Im having is I dont see how to connect the wireless. By router is broadcasting, and on any other machine I can just see the network and connect/enter PW etc. This ubuntu machine doesnt see any wireless networks in the network list. Is there something Im not getting?Ive done nm-tool and it sats my wlan is just disconnected. Am I going to have to enter my network manually?
View 1 Replies
View Related
Jan 4, 2010
I installed Ubuntu 9.10 onto my laptop, and having wireless issue. I was able to connect to wireless at home, but cannot at school. Then recently, I reformatted by desktop at home, and now I can no longer connect to my own connection. But yet, I'm able to connect to my neighbor. I considered installing ndisgtk package, but then i thought if I'm able to connect to some connections that means I'm not missing windows driver (maybe I'm wrong ).
View 3 Replies
View Related
Jan 7, 2010
I was able to connect fine before yesterday but installed some updates and now my wireless will no longer connect. Wired network is fine, that is how I am online now. I can see my network in network-manager but it will not let me connect.Let me know what info you may need, I have a RTL8192SE wireless card.
View 2 Replies
View Related
Jan 22, 2010
I'm very new to linux, I've just installed ubuntu 9.10 but it won't connect to the wireless for the internet. It sees my network and I can try to connect to it, it even asks me for the password (yes i'm using the right one) but soon as i tell it to connect it just says its connecting and then asks me for the password again and it keeps doing this?
View 1 Replies
View Related
