I'm very new to linux, I've just installed ubuntu 9.10 but it won't connect to the wireless for the internet. It sees my network and I can try to connect to it, it even asks me for the password (yes i'm using the right one) but soon as i tell it to connect it just says its connecting and then asks me for the password again and it keeps doing this?
View 1 RepliesI have a working wireless connection (windows can connect with it and last week Ubuntu was connecting) but Ubuntu 10.10 or 11.04 can't connect now. I can find the wireless network with network manager. Ubuntu tries to connect because the connection was set to auto-connect but never happens other than at regular intervals ask me for password.
I changed the name of the SSID and changed the pass. Still windows can connect and ubuntu can't.
What I have to try to resolve this?
I am using an Asus EEE PC 900HD netbook and lately Ive been having trouble connecting to my wireless network (WPA2 secured). The WiFi adapter is a RealTek RTL8187SE. Every time I try to connect Network Manager prompts me for my WPA2 wifi security key, which already happens to be entered in the prompt. I then press Connect but after a while the prompt with the password already entered appears again without connecting to the network. I should point out that this issue only seems to happen on this network.
All other networks (including other WPA2 networks) I can connect to with ease. I have MAC address filtering enabled on this network and have the MAC address properly entered in my router and have been able to connect to my network in the past until now. I believe this is a problem with gnome-keyring as I when I first started using Ubuntu on this computer (9.04) I got confused with the whole default password for keyring thing and I messed it up so that every time I connect to this particular network the Network Manager prompt would appear and I would have to press Connect to connect to my network
[URL] I also tried deleting all my network connections and reconfiguring them to no avail. In my troubleshooting I did make an interesting discovery however. I plugged in a USB WiFi adapter (RealTek RTL8187B) thinking I could at least connect to my network and browse these forums for a solution to this problem. The USB adapter connected to the network and I was able to brose the Internet. I then disovered that I could go into into Network Manager and get the other adapter to connect. I coud then unplug the USB adapter and the other adapter stays connected and works flawlessly. how can I get my netbook WiFi adapter to connect to my network automatically?
I have a HP mini 1030NR that is the solid state 16 gb version. Windows was taking over all my memory so my son suggested that I switch to a Linux operating system. I am very impressed but have run into a problem that I can't seem to resolve.
I can't connect to the internet. After finding these forums, I have been able to determine that the card is disabled.
this is what I ge code...
I have checked the firefox file and it is set to work online. When I check to see if the card is enabled, the above is what I get. When I try moving the physical switch on the netbook, the light stays orange.
I totally deleted windows on the netbook and am using a different computer to write this. I am also computer illiterate, so please write slowly so I will understand.
I just installed F11 and can't make VPN connection to PPTP server using NetworkManager.
This is what I get:
** (nm-applet:8092): WARNING **: Error in getting active connection 'Vpn' property: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (nm-applet:8092): WARNING **: _nm_object_array_demarshal: couldn't create object for /org/freedesktop/NetworkManager/ActiveConnection/3
I can connect to this server from Fedora 10 using identical settings.
VPNC tunnels work fine.
I've replaced Ubuntu 10.10 with F13 and can't connect to the Internet.
I'm using a WiFi connection to my router. I receive an IP address via DHCP. I can connect to the router's web configuration interface, 192.168.2.1. Same with my NAS web configuration interface.
I've also tried with Live CD (F13 and F14beta). Same thing: receive IP, connect to router's web interface, can't connect to Google.
As a check, I tried Ubuntu Live CD and I can connect to the Internet.
I've also tried F13 Live CD on my laptop. Can't connect to the Internet.
After upgrading from 10.10 to 11.04 and running an update ubuntu can't connect to any wifi networks, although it can see them perfectly (and potentially unrelated, the windows partition is having major dns issues with the wifi too).
I've looked around and can't find an obvious fix, just a bunch of posts from people with the same problem that wasn't solved. I got frustrated and was about to install 10.10 again but I noticed I couldn't connect to the wifi on the liveCD either. I then tried the 10.04 liveCD, and the internet worked aswell as when I installed it. However before when I upgraded from 10.04 to 10.10 I had no problems with the wifi, so it leads me to suspect that there was something installed/some setting in 10.04 that is missing from the latter version.
Cannot connect to internet via Firefox or Midori on my Dell Inspiron 8200 laptop with a Netgear wireless card. However, I can update via yum, I can ping google from the CLI, I can ssh to my desktop, I can point a browser to find my router which /etc/resolv.conf points to, but can't get a browser to resolve hostname. I'm posting from a different machine (desktop), here is my /etc/resolv.conf:
[Code]....
As the title suggest, I have downlaoded the latest copy of Ubuntu Server from the ubuntu website.Everything installed fine. DHCP configured ok as far as I can tell. I can ping other machines on my network (which are running Windows) and they can ping the Ubuntu machine and conenct to Apache which is running on it.If I try to ping google.com or any other domain, it gives the correct IP address but gives no response to any pings, dont telnet on port 80 (or any toher potr for that matter) on any machine on the internet. I checked the settings using ifconfig to see what DHCP had assigned, and they matched the windows machines configuration (other than the IP address obvisouly). I tried assigning a static IP, even reserving a particular IP for my NIC.
Whatever I do, i cant connect to any machine outside the network via IP or domain.I have searched everywhere and tried everything i can find on the net but still to no avail.The Windows machines are part of a domain called alcom-uk.local and run off of a Windows Small Business 2003 Server. Not sure if i need to manually setup Ubuntu to connect using a domain or anything.
I just installed the new version of ubuntu 10.10 and I discovered that my wireless card atheros ar5001 is not working, i tried to modprobe ath5k and wont work either.
All the past versions of ubuntu had no problems. bug?
I'm using a compaq cq60 laptop.
I have a system 76 panp7, which uses rtl819xSE for it's driver. I also have a Toshiba laptop that uses the same driver, I'm getting the same symptoms from them. The panp7 is using x64, while the toshiba is on 32 bit.
On my home network, at the local coffee shop, and pretty much everyone I know's home wi-fi everything works wonderfully.
On the university network, I get a useful connection about 1/3 of the time. The wireless disconnects randomly, and once disconnected will not re-associate to any network without a restart.
I've tried turning wi-fi off and back on again to re-establish connection. Reboots will get me another chance at connecting to the uni-network, or let me connect elsewhere without a problem.
I strongly suspect that it's the school's fault, since it only happens on their network. but IT won't fix it unless I can prove that it's on their end(and I'll likely need to fight uphill for that).
I have fujitsu siemens amilo L1310G.i can`t start wireless card.In helpdesk they told me they only support win xp.Can anybody help me ? Tried acerhk but nothing worked
View 6 Replies View RelatedThe computer connects wirelessly to a router. The router is connected to the internet and that is working well. (If i use a cable connection to the router, I can reach the internet).
Why wont the wireless connection reach the Internet? It is a strong connection. It worked before wirelessly. I am on 10.04 beta, with the recent updates installed.
I have just switch to Ubuntu on my laptop from Windows 7 and I am experiencing alot of wireless dropping.
The signal itself is full and I am very close to the router.
What could be the issue and how do I go about rectifying it.
Laptop: Dell 13z.
Wireless: Intel 5100 agn
Ubuntu 10.10 x64.
I just installed opensuse 11.4 and i'm not being able to connect to my wireless lan. It recognizes my network, but when I click "ok" after typing the password it is like I had done nothing, no connection is set at all.I guess it is probably some configuration stuff since my notebook recognizes all available wireless networks. Sorry about the lack of details, but that is all I got.
View 6 Replies View RelatedMy wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
View 1 Replies View RelatedI am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View Relatedin linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies View RelatedI have recently installed ubuntu 11.04 on my asus eeepc1005hab. And I've had problems with the wifi. I can connect via ethernet, but the wireless won't connect. I can see the connection, but my wifi never connects. I've tried many things but it still won't work.
View 9 Replies View Relatedwlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View RelatedI installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
Code:
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
[Code].....
I've read around blacklisting but I'm not sure on what I should be blacklisting really.
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
Crashed my windows XP OS and replaced it with UBUNTU 9.10 can get online with hard LAN but wireless is disabled tried to install OEM driver for the broadcom card but only ended up blacklisting what appears now to be the default drivers I need b43. card is Broadcom BCM 4318, ICH6 chipset. on a Gateway MX6128.ROCK ON!
View 2 Replies View RelatedInstalled Ubuntu 10.4 Beta on my Asus Eee 901 (the old Windows XP got tired...) Nice install, BTW, but Networking does not work. I have a very run-of-the-mill Linksys wireless router, which uses WPA2 passord authentication on the wireless side. Ubuntu clearly does try to connect, but then asks me for the password again, repeated a few times and then gives up. The SSID is OK (same I use on my Windows machines) and the same for the password, so it must be something Ubuntu does to the password. Bug or operator error?
View 9 Replies View RelatedAfter playing around with 9.04 for several months and getting used to linux (I have tried several distros but like ubuntu the best), I decided to reinstall to have a clean system. My wireless has been working great using ndiswrapper. Now after re-install and updating the system, here is my problem. The USB Network Adapter is seen and the wireless network is seen but it never connects. It just keeps asking for the passphrase (I have WPA2 Personal turned on). I have tried turning off the wireless security but that doesn't seem to have any effect.
I have done the things I did before to get the wireless connecting - disabling the native driver (which doesn't work at all) as well as the broadcom drivers which seem to interfere with ndiswrapper. I also tried downloading and compiling the ralink native driver (v 2.3.0.0) but that didn't work.Here is the setup:PC with dual core processors running at 2 Ghz3 GB ramUbuntu 9.04Belkin N150 Enhanced Wireless RouterBelkin N150 Enhaced Wireless USB Network Adapter (uses the rt2870 driver.)
I install the Ubuntu 10.04 OS on to a new Mac computer. Everything seems to work fine except for my networking icon/system. When i open the network connection i can not connect to a wireless network. it doesn't show any wireless networks in the area. it will only work if i connect with a LAN cable to go online.
View 6 Replies View RelatedI am running Ubuntu 10.04 x86 on my netbook. When I try to connect to the office WLAN I get the usual "%SSID% Connection established" but my network status icon in the panel doesn't change.
I then go online and sometime it works sometimes it doesn't. When it does work it is extremely slow. My first though was maybe it is because the router is set in mixed mode, this wasn't the case as my router at home is mixed mode and works fine. Then I thought maybe its the DNS so I set the DNS address to 8.8.8.8 (googles open DNS server) - same thing, still slow.
Next I thougt it maybe an incombatability between ubuntu and the router, a collegue of mine uses ubuntu also (10.04 x86) and he has exactly the same problem.
When I connect to the router using a cat 5 I get a similar problem, the network status icon changes to connected but the connection is still extremely slow. I know it's not the line because pleanty of other PC's use the same connection and it's fine. Again when we try it on my collegues ubuntu machine its the same thing.
So at the moment I know its not my machine or the DNS or the WLAN
I'm a first time user of ubuntu and I am having huge issues getting my wireless to work. I've tried using the troubleshooting guide, but it says that it's already installed and to go to windows wireless drivers to install the .inf file. Problem is.. I can't find the file anywhere. When I type lspci into the terminal this is what it says: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
View 9 Replies View Related