I am having an issue with a newly installed 9.10 version of Unbuntu. After a bit of fiddling about, I have found that the only way I can connect to my wireless network is if I unsecure the network. Is there any explaination for why it will not work with either WEP or WPA?
View 4 RepliesI can connect to any wireless network it seems other than the unsecured wireless network here at my college. As long as you register your mac address, which I did, connection should be fine. I have no issues connecting via ethernet, but I need the wireless also.The wireless controller is Intel Wireless WiFi Link 5300. I tried alternatives to the Network Manager and I've looked all over google which I haven't seen many issues, it should work fine.. not sure where to go from here.
View 5 Replies View RelatedI am attempting to connect to an unsecured wireless network; I helped set it up for my local club with a local ISP. Once things were up and running I took my wife's laptop running Ubuntu 8.04.3 and Wicd. Can see the unsecured network no problem, good signal, hit connect, whirs away for awhile, then: 'Unable to obtain IP address.' Strange. I am about to give up and report back to the ISP when I think I might try one of the old Windows boxes in the computer room. Spots the network, hit connect, online, no problem.
So Windows connects fine, Ubuntu box can't get an IP though no doubt the router is trying to serve it one.
I normally connect to a free wireless project, and did have a Windows box until yesterday when I installed Fedora 10. When I was using Windows, I was able to connect to the unsecured wireless network. Now on Fedora 10, the wireless card is working and is able to pick up signals but the signal strengths are markedly decreased and I am unable to see the network which I usually connected to.I really don't want to go back to Windows.
View 12 Replies View RelatedI have an Aspire 7741z running Ubuntu 10.04 I just loaded the 32 bit version today, then did the Update manager (398 updates) Before the update everything worked fine. After the update, no wireless. Password & security is correct, all wireless setup is correct. Aside from my network, I do have access to a local hotel (next door) and I can always get into their unsecured guest network, that doesn't work either.
I believe it is the driver since I have loaded Ubintu 10.10 32 bit with the same reaction. It will connect when I put in the live disk, but not from the hard install. output from lspci
[Code]...
I took the plunge and made a clean install of 10.04 because it sounded cool (and it is, I like it!) and now I'm tied to a wall again I've gone through several of the broadcom wireless card tutorials on the forums and the only thing I've managed to get is a lit up wifi light. It's not detecting an active unsecured network several inches away, that has computers up and running on it... I'm perfectly willing to post more details as needed.
[Code]...
one of these "WiFi works in Gnome, not in KDE" threads, but I have been all over google and hundreds of threads across different sites and can't figure this one out.As mentioned, wireless is peachy in Gnome, unfortunately I like KDE and I'm more productive using it (when I have internet). Wired network works fine in KDE, and my network card
Code:
03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Subsystem: Intel Corporation Device 1201
[code]....
I have no problem with my wireless network at home, or visiting friends, but it won't connect to public, open, unsecured WiFi networks, eg hotels, trains, ships.I'm using Ubuntu v9.10, NetworkManager applet v0.7.996, on a Dell Inspiron 1750 laptop.If I left click on the NetworkManager, the available wireless networks are displayed and I can see the relevent open networks, named as expected and shown without the lock icon. I click on the relevent entry, watch a spinner for 30 seconds or so and then it drops off and I have no connection. This happens for "all" open connections.If I look at my defined Wireless Network Connections now, I can see, eg, "Auto Internet@Sea, Last used: never". Editing that connection:
[Wireless]
SSID: Internet@Sea
Mode: Infrastructure
[code]...
I've got a Dell Inspiron mini 10 that has the Broadcom 4322 wireless chipset in it. I have NEVER got this thing to work satisfactorily despite the numerous tutorials online about getting this damned card to work. I thought everything would finally be fixed with 10.04 but no luck at all. I've tried the b43 diver (which isn't supposed to support the 4322) with no luck.
I also tried the restricted STA driver, which seems like it will work as it identifies networks and even connects to them! However, the speed is excruciatingly slow and connections drop like flies. This netbook is actually a friends that I convinced to let me put Ubuntu on and have them try it out, but they are most surely not going to be impressed if the wireless never works.
I have a pretty beat-up laptop, on which the inbuilt wireless doesn't work, and so I now have an ASUS WL-167g, which is acting up!It almost always connects to the required networks without an issue, but then once I'm connected it's REALLY slow on some of them! For example, while I'm at school, it works flawlessly! And at a couple of friends' houses, it works too! however, at home, and at a couple of other places, despite the fact that it connects, its so slow, that google takes like 5 mins to load and searching for anything on google leads it to time out!! This happens whether I'm right next to the router (full signal strength) or 2 floors up (at like 3 bars strength)!
It's getting pretty frustrating to have to swap my lan cable between my desktop and laptop constantly, and also to not be able to use my laptop away from my desk!Does anyone know what might be going on??Also, while i have you guys here! I have another problem -- with the inbuilt card.. Initially, it wouldn't work at all.. but more recently, it has started to function (it connects and works on my home network fine) the only problem is that about 10 mins after I turn the wireless switch on on my laptop, it hangs! (EVERYTIME) (if it's relevant, my laptop is a SONY VAIO VGN-S46GP). Again, any input would be appreciated!!
Ubuntu, been using windows for years and now use Mac. I have Ubuntu running on a netbook at work and all of a sudden my wireless connection not only doesn't work, it doesn't seem to exist! Wired still works fine, but the wireless option has vanished. How do I reset or restore or whatever it takes to get my wireless working again?
View 1 Replies View RelatedI know my pass phrase, I know my encryption type, I put that info into the wireless utility for GNOME and it works. I Just recently installed the Kubuntu desktop from the repos and tried to connect to my internet wirelessly and for some reason it can't establish a connection. Is there some option I don't know about that was being set for me automatically before?
Here is my wireless info:
id:
network
description:Wireless interface
product:RTL8187SE Wireless LAN Controller
vendor:Realtek Semiconductor Co., Ltd.
[Code]....
I bought the Asus n13 and am ready to pull my hair out. I've followed the posts and cannot get it going so I'm taking it back. I need something that will just work. HP s5747 computer.
View 1 Replies View RelatedI have a aspire one zg5 with 10.10 running on it. it connects to wireless everywhere but at home where i have a netgear rangemax wpn824 v3 i tried with and without password encription and downloaded wicd still nothing.
View 4 Replies View RelatedI have recently bought a new laptop for this purpose. It is a Toshiba L555D-103. It was pre installed with Windows 7 (64 bit). I have now installed Ubuntu 9.10 (32 bit). It works perfectly when wired. But it does not when I try it wireless. It did work wirelessly with Windows 7, and I have many more both stationary and laptops working through the router, so I do not think the router is the problem.I am guessing that there are no drivers for the wireless to function, but I am not sure. I am guessing that there are no drivers for the Ethernet card ?
View 9 Replies View RelatedI recently got a cable modem from Comcast, and connected a Belkin F5D7230-4 wireless router to it, then connected my computer and an Xbox 360 to the router with ethernet cables.
My computer dual-boots Ubuntu 9.10 and Windows 7. In either operating system, the wireless connection is flawless. In Windows, so is the wired connection. But in Ubuntu, there's a lot of trouble with the wired connection -- specifically, while I can connect to the router and to the Internet, and while I can use ping, dig, traceroute, etc., to verify connections to remote hosts, Web browsing, or anything else that uses http, works only for a few Websites, and then only erratically.
I don't believe it is a DNS problem -- testing with ping, dig, etc., demonstrates that, and I have also tried using alternate nameservers. I also don't believe that it is an issue with IPv6, as I've tried the fixes usually suggested, including editing the grub configuration to disable IPv6 support in the kernel and verifying that IPv6 was inactive. I've also tried using local dns servers such as pdns-recursor. None of these things seemed to help.
Also, perhaps unrelated, but disturbing: my computer has locked up a few times while testing the wired connection, and I had to use a hard reset to restart the computer.
I have an HP dv2000t laptop running 9.10 with an Intel PRO/Wireless 3945ABG wireless adapter. I have no problems connecting to my wireless network when I'm within about 15 feet of the router. When I move to a different room, my network shows up the list of available ones, but I usually can't connect. When I run Windows, I have no problem connecting from the same distance. I'm using the default network manager.
View 1 Replies View RelatedI installed 9.04 clean yesterday to try and once again move from Windows to Linux and I thought I would give it a real try this time to learn the new OS. Well, right off the bat my wireless connection does not work. By default my WPA/WPK security was set on my router. My wireless adapter does connect to the router but there is no internet access. If I remove the WPA/WPK security and leave it open I can connect and I do have internet access but as soon as I re-enable WPA/WPK security I lose internet access. I even tried WEP security and same result. What the heck is going on with this? I am not going to leave my router unsecured but that seems to be the only way this works. I also upgraded this morning to 9.10 and same problem so this is not limited to 9.04.
View 4 Replies View RelatedIf I boot Ubuntu 10.04 LTS from CD, it prompts me that I need to install drivers for my NIC wireless card and links me to a generic Broadcom driver. After installation of this driver I can see my wireless network. If I then reboot and boot into a Wubi installation I created, my wireless adapter light stays off and I get a message that Wireless networks are disconnected. Do I need to do something to get the same drivers installed under Wubi, or is this a separate issue?
View 1 Replies View RelatedSo, I tried reviving my old windows laptop by installing Ubuntu on it, but it turned out to be too heavy for it, so i turned towards Lubuntu and Xubuntu.
Now, for the couple of days I used Ubuntu, until i decided it's moving too slow and I should go for a lighter version, my USB wireless adapter (and the touchpad, but that's a subject for another subforum) worked fine.
When I installed Lubuntu and Xubuntu, it stopped working. I tried using network-manager and wicd to make my adapter scan for wireless networks, but it's like the USB isn't even there. When I pulled it out and stuck it on my main PC (that is running Ubuntu), it was discovered immediately and connected to my router. But I can't do it on either Xubuntu or Lubuntu.
PS: If anyone has a quick hint about why my touchpad is working during the installation of Xubuntu, but not after it's complete and loads the desktop, I'll make a new post in the relevent section. A USB mouse works fine everywhere, but a touchpad isn't moving the pointer.
I am very new to this and tried searching for this problem in the forums but have not find anything. When I installed ubuntu (formatted HD), the installer gave an error but then seemed to proceed as normal and everything installed (from CD). However, when I boot up from Live CD all my wireless works fine (it detects networks, connects, etc.) When I boot up without the CD it says networking disabled and gives me no other options.
View 4 Replies View RelatedI have found a few older threads that have asked a similar question, but wonder if updates and new devices have improved the situation:
Is there a PCI (not express) 802.11n adapter that will work with 9.04/Jaunty "out of the box"?
I recently purchased a Netgear WG111v2 802.11g wireless usb adapter for use with an ARM embedded device (loaded with the ARM port of ubuntu). It uses the rtl8187 driver and, when attached to my laptop, connects perfectly through NetworkManager. Unfortunately, I am not working with any ui on my embedded device so I won't have that luxury and must connect via the terminal. Unfortunately, I'm not able to connect this way on either my laptop or the embedded device (they both CAN pick up surrounding AP's through iwlist scan though). I'm able to set the ssid through
Code: sudo iwlist wlan0 essid "woot" and my access point is temporarily open (no wep/wpa). When I bring the device up using
Code: sudo ifconfig wlan0 up the light on the adapter starts blinking but I'm still not able to connect. iwconfig wlan0 outputs:
[Code]...
I have a system 76 panp7, which uses rtl819xSE for it's driver. I also have a Toshiba laptop that uses the same driver, I'm getting the same symptoms from them. The panp7 is using x64, while the toshiba is on 32 bit.
On my home network, at the local coffee shop, and pretty much everyone I know's home wi-fi everything works wonderfully.
On the university network, I get a useful connection about 1/3 of the time. The wireless disconnects randomly, and once disconnected will not re-associate to any network without a restart.
I've tried turning wi-fi off and back on again to re-establish connection. Reboots will get me another chance at connecting to the uni-network, or let me connect elsewhere without a problem.
I strongly suspect that it's the school's fault, since it only happens on their network. but IT won't fix it unless I can prove that it's on their end(and I'll likely need to fight uphill for that).
I have a Dell Laptop which worked very well also with the wireless card. In fact the wireless card was never an issue and worked straight out of the box. However it has lost the ability to detect the wireless networks. I have plenty of networks in my area and my little netbook shows them nicely. So did my Dell laptop in the past. But now the Dell laptop shows no scan results at all although the card seems to be up and running (see terminal output below) I have to add that I had to compile a module for the WIRED network card which works excellent I always use and used a wired network and cannot say when the wireless card stopped to work PLUS I had a faulty harddisk which was replaced by Dell recently so there could be also a hardware fault since then because the laptop was opened by the service people. And yes the wireless is switched on in the BIOS If I create a wireless network with the laptop the netbook can see it, so the wireless card is broadcasting
[Code]...
I just bought a TRENDNET TDM C4000 (=modem/ wiredrouter) and got it working. If I connect my computer with through the ethernet port directly, the internet will work. However, when I try connecting the ends of the ethernet cable on the modem and my wireless router, it's not transmitting. I know I set up the wireless router correctly because it worked with my previous modem. I just need to know how to configure my modem so that it works with my wireless router (D-Link DI-524).
I have a long wired ethernet wire to satisfy my academic needs for the internet at the moment but my mother is not able to surf the internet and it would be more convenient for myself to put the wire back to my desktop and have my laptop browsing wirelessly.
I've recently installed KDE 4.4.1 just to try on a Dell 1545 laptop with Ubuntu 9.10 previously installed.
My problem is that the wireless connection works just perfectly with nm-applet under Gnome, but when I login on KDE and ask KNetworkManager to connect to the same network as before, it can't finish the connection.
When I choose the connection the program asks for my passphrase, I type it and then it just sticks on "activating network" and nothing happens.
My experience with KDE is zero, so I don't even know where to start looking. I'd even tried to kill KNetworkManager and try to replace it with nm-applet, but I think there's a daemon that restarts it immediately.
I'm having a problem with my wireless connection. When it runs, it's perfect, but every once in a while (and increasingly more often) it randomly disconnects and doesn't reconnect when I click reconnect, even if I manually disconnect it. Every time this happens, I have to reboot the system, after which it works perfectly. Then it dies again.
I've checked around the forums, there are some similar threads but they seem to be specific to the wireless card. The reboot method works, but I'd really like to find a way to solve the problem without having to resolve to the Vulcan nerve pinch. I'm a real newbie to Linux and the more complex side of computers in general, and I hardly know what is what, so please excuse me if I seem a bit thick.
My school has (once again) chosen to change their wireless network. This means it has gotten a lot slower, and that only our hotspot works. Our hotspot however is secured so that im unable to enter facebook, and a lot of other websites, etc. So what i did in windows was installing a program called hotspot shield, which redirects you ip through a server, so the LAN Admin basically have no control of what you're doing if he haven't got more skill than the one we have. I think what Hotspot shield does is making a vpn connection (correct me if im wrong) and i would certainly like to do that i ubuntu as well.
View 1 Replies View RelatedHere is my problem: I am using ubuntu 10.10 64 bit installed on a HP tx2 1274nr laptop. I can get my wireless to work on both the Broadcom B43 wireless driver and the Broadcom STA wireless driver. Though only one can be active at a time.
My problem lies in I can activate either driver until I reboot the laptop. then it becomes inactive.
Is there a fix for this problem. I would like to have my wireless active after restarting.