I'm wondering if I can get an answer to this oneI'm pretty new to Ubuntu, been using it off and on for a few months now. Right now I'm using Lucid and I have no problem connecting to the other PC's in my house that run Windows 7, however when I try to access them it asks for a password. I disabled the password on the Windows PC, so is it possible to get into them without a pass? If so, how
View 3 RepliesTrying to figure out if there is a way to connect to a cifs share, and only being prompted for one password? ie using the following:
sudo mount -t cifs //goanna/neddy -o username=neddy,iocharset=utf8,file_mode=0777,dir_mode=0777 /mnt/neddy
prompts twice for a password (sudo & the share password). Is there anyway to "catch" the sudo password for the connect? (Long shot!
We have a computer here with stuff on it we all use. If I load up my Windows XP VM and open it through My Network Places it loads up just fine. In Ubuntu Nautilus complains that it cant mount the share. If I do:
sudo mount -t cifs //tech1/e /mnt/tech1
it asks for a password. There is no password.
My laptop has Ubuntu 9.10. It can connect to shares on my XP and Vista computers without issue, but cannot connect to a share on my Windows 7 system. I'm using "Connect to Server" and have tried by both Computer name and IP address. When I click connect, it prompts me for User ID, workgroup and password, however when I enter them, the same prompt comes back a few seconds later and is blank. I don't receive any errors, it just won't connect.My XP and Vista systems can connect to the Windows 7 share, just not the Ubuntu system
View 9 Replies View RelatedI have shared my cpl-300 from my windows 7 machine to my network, so that may print from my linux laptop to it.
Now whenever I go to system -> Administration -> Printing and try and browse for my printer it asks for a username and password any username or password I enter that is on the windows 7 machine gets rejected.
So I tested to see what would happen if you used smbclient to view the shares available from the windows 7 machine, unfortunately it results in another permission error. The funny thing is I can mount a share using "mount -t cifs".
I'm running Fedora 13 on my laptop and am trying to share out a folder from a Win7 computer. Folder on Win7 machine is set to allow access to everyone.In Fedora, I have SELinux disable, I've made sure samba is allowed in the firewall, and that the smb service is running. There's no password on the Win7 computer, so in the Windows Share setting on Fedora I just put the username and left the pass field blank.
I've seen some things say all you have to do is go the the "Network" place...but somehow that seems to have become non-existent and I don't know how to get it back.Also, trying to connect to smb://WinShare/Share results in it saying that the server has timed out.
i've been trying for the last 2 days (onoff) to setup a simple samba share to connect to my windows 7 box
[Code]....
My friend is trying to share his clearwire connection with me using Windows ICS. Using network-manager or wicd, I am unable to connect to his share. I am able to connect unencrypted with iwconfig, to the ad-hoc network, and then use dhclient to gain ip address.
I am not able to connect to WPA encrypted share using network-manager or wicd. nm-applet crashes when trying to connect. I am attempting to setup wpa_supplicant, but haven't got it working yet.As usual, the wireless networking out of the box experience in Ubuntu doesn't work. This is extremely frustrating. If Ubunut's goals are to be the default desktop, then these guys need to get wifi that "Just Works"...
I'm running Lucid and and trying to get Samba set up to allow sharing files on my network. My problem is that my Windows laptop (Win7) can't see the Linux PC when I click on Network. It only shows my own laptop and my roommate's Vista laptop. However, if I manually connect to the computer (\serenity) it works just fine.
Right now I'm simply using the smb.conf that comes with the package and adding my share info.
The relevant section is:
Code:
I have a Windows share on my network and I protected it with a password. I access it with my Ubuntu desktop, and I saved my password the first time I accessed it. The password is saved in Seahorse (the keyring), but each time I try to access my Windows share, I have to type in my keyring password.Despite trying several tutos, I haven't been able to prevent keyring from asking for my keyring password.
View 9 Replies View RelatedI cannot connect to a share on Windows XP machine, because it rejects my password. I'm using correct username and password. When running from console, smbclient's error message is: session setup failed: NT_STATUS_LOGON_FAILURE I can connect to said share from other Windows machine.
View 9 Replies View RelatedI have searched for days on this problem and no one seems to have the fix. Everyone else seems to go off on tangents.I have 3 computers. One runs XP pro, one runs Windows 7 Ultimate x64, and one runs openSUSE 11.2.The two windows machines can share files between each other with no problems.On suse I setup samba correctly. When I go to Computer -> Network on suse, I then go into Samba Shares. Then I see my workgroup name. I click to go in and I can see all 3 of my PC's listed here.When I click on my XP pro machine,am prompted for a user name and password. I put it in and I gain access perfectly.
When I click on my Windows 7 machine, I am prompted for a user name and password. I enter it in and it prompts me again for the user name and password. It will not let me in.I have changed all of the settings in 7, I have disabled the firewall, I have changed the security policies, I have changed the encryption strength.Simply Samba is nolaying well with Windows 7. I cannot believe that I am the only one with this problem
I want to connect my linux distro to a windows file share on a networked computer.
View 1 Replies View RelatedI am having difficulty connecting to a PC that runs Windows 7 (and suffice it to say Windows XP as well). I go to Places > Connect to Server and choose Windows share from the drop-down list. I enter in the computer's IP address in the Server field and click Connect, when I'm brought to the "Password required for x" screen (x being the IP address). I enter my username for the Windows machine, leave the Domain field as is (it is WORKGROUP by default, which is the Workgroup name for both PCs), and then I enter my Windows password. The dialog keeps popping up as if I entered incorrect credentials. I do want to point out, on the dialog, it asks for a Domain name. Since I do not have this computer connected to a domain (I'm at home), it is a workgroup network. However, prior to Ubuntu 10.10, I was able to use this method to connect to Windows computers.
View 9 Replies View RelatedRecently after updating my Debian Jessie, I can no longer access windows shares. I can access those shares from windows PC. And to be able from debian.
After I enter my password of windows share, the password dialog box pops up again. No warning, no errors. It just pops up. I cannot connect to any windows share.
I am setting up samba on my CentOS server for the first time. I am using webmin to configure samba. Here is the smb.conf
Code:
[global]
netbios name = KISKA
cups options = raw
load printers = yes
server string =
[code]...
I can see the domain name "KISKA" in the "network" tab of windows explorer, however when I click on it I get this error: Windows cannot access \KISKA check the spelling of the name. otherwise there might be a problem with your network. Under the details of this error I get this: "The network path was not found" Also I have stopped iptables so it cant be firewalled
if i try to connect to my samba server ( share ) from my windows xp ( or vista, i've tried both ) it says, that the network share cannot be found. i've installed all necessary rpms on my fedora 10, necessary for running a samba server:
Quote:
[root@********* samba]# rpm -qa |grep samba
samba-common-3.2.8-0.27.fc10.i386
samba-3.2.8-0.27.fc10.i386
samba-winbind-3.2.8-0.27.fc10.i386
after that, i've configured the smb.conf file, as follows:
Quote:
[root@*********** samba]# cat /etc/samba/smb.conf
#======================= Global Settings =====================================
[global]
# ----------------------- Netwrok Related Options -------------------------
workgroup = GROUP
[code]....
there is no iptables definition, or any other firewall installed, neither on the server nor the client. i've read through alot of howtos an manuals, but was not able to find the problem.
For some reason, my latest Fedora 11 install + yum update does not seem to have the option to connect to a Windows Share in the drop down list when I select Connect to Share. I'm using gnome.Does anyone have any ideas which packages provide this functionality.
View 2 Replies View RelatedTrying to setup Samba for the first time and am unable to connect to the share from my Windows machine. It is a very basic setup, just trying to setup a single share to use a backup location for my windows files.
I've done the following:
1. Fresh install if fedora 15
2. installed samba
rpm -qa | grep samba
gives the following:
[Code].....
3. Used samba server configuration to setup the share and create the samba users
4. When I tried to connect from my windows machine I get the error that the server is not accessible, you might not have permission to use this network resource or I get the error "windows cannot access server, check spelling and try again.
Both computers can ping each other. I opened samba ports in the linux firewall and tried to connect again: same error Disabled firewall all together and have the same error. Here is the output from the testparm command
[Code].....
I try to connect my Debian Jessie to my Windows share
This is what I have done:
-> 1 - create an .smbcredentials file located in my /home directory (with account / password and domain)
-> 2 - implement /etc/fstab with information like that :
//192.168.x.x/Animes/media/Animes cifs uid=toto,dir_mode=0777,file_mode=0777,credentials=/home/.smbcredentials,iocharset=utf800
and when I try to go on my windows share, I have this message:
An error occurred while accessing 'Home', the system responded: mount: only root can mount //192.168.x.x/Audio-Video-01 on /media/Audio-Video-01
I think about one thing, if uid=toto is different in fstab than my current debian account session name, it is possible the problem came because of that?
(fstab, uid=toto and current session titi)
I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
I'm on Debian Lenny. I've shared a folder on gnome GUI, then went to win 7. I see my machine, SERVDEB01. When I click on it, I get the login popup. The workgroup set in samba is FILE-SHARING, so I login with the following: FILE-SHARINGmyuser password and that's when I get the unknown username or bad password thing.
I had a look to /etc/samba/smb/conf security = user is uncommented the shared folder appears at the end of the config file In despair, I've also created an identical user on win 7 and the linux box. I've been into the security Local Policies of windows 7 set NTLM to LM and NTLM (instead of NTLMv2) Here's my smb.conf in case it's needed.
[Code]....
I followed these directions: [URL]
But whenever I try to connect from my Mac to my Ubuntu AFP share, I get "invalid username/password". I have the correct username/password entered, so I think there is a configuration step that I can't find.
I have an old laptop trying to mount a share with samba on a server.
Laptop and server both running ubuntu 9.04.
When I try to mount a share on the server
I get a password prompt, and no server passwords work.
This is a guest share, and my two windows laptops mount it no problem with no password.
Here's the relevant part of the smb.conf:
Laptop and server are on the same workgroup.
Have setup using Samba a share on the documents folder. When I attempt to access it from another PC, when access is allowed to everyone, all works perfectly.However, when I allow access just to a user, on attempting to access this folder, it asks for a password but on entering the correct password it does not allow access.
View 3 Replies View RelatedI am running Jaunty 9.0.4. I used system-config-samba (gui) to configure Samba. I put myself as a user and tried to map the drive from my local PC. I am unable to map the drive. On windows, I try to connect using a different user and when I select finish, it prompts me again and adds my workgroup before my user name.
View 8 Replies View RelatedI have a Dell PowerEdge 1650 server with 3 NICs in it. I am trying to use one NIC (eth0) to connect to the internet, the second NIC (eth1) to share the internet connection to a LAN, and the third NIC (eth2) to connect to the LAN.
It is running Ubuntu server 8.10
The problem that I'm having is that NetworkManager (version 0.7.0) keeps setting eth2 as the default connection, and then I don't get any internet at all from the server.
My main goal is to be able to share files from the server to computers on the LAN. The secondary goal is to have a virtual machine hosting a Halo server, connected through eth2, so that it can host LAN games. But that is a secondary goal after I get the connections to work.
I've been looking around and finding other people who have done bits and pieces of this, but not the whole thing. I had been hoping to simply use the NetworkManger, but I don't mind editing config files.
Also I can't seem to find any good instructions on editing the /etc/network/interfaces file. The man file is incomplete, and everything seems to point back to the man file.
My Ubuntu Desktop (9.10, 64-bit) VM can't connect to my Windows 7 (64-bit, Ultimate) File Share using Nautilus. I enter "smb://<comuterName>" in the address bar and then it comes up with a password dialog (see screenshot) and then after entering the correct login info, the dialog disappears for a second or two but then reappears again. The dialog always comes back up and the share is never mounted. Connecting from an XP box on the network to the windows 7 share works just fine. Connecting from the Ubuntu machine to the windows 7 share using the appropriate 'smbmount' command works just fine. Connecting from the Ubuntu machine (using the nautilus GUI) to the XP box (password protected) works just fine. Then I turned off password protection in Win7, rebooted the win7 machine, and still all of the above tests turned out the same. And the Ubuntu machine still doesn't connect to the windows share using the nautilus GUI, and still displays the password dialog even though no password is required anymore. I tried using smbclient to view the shares, here is the output (not sure if I should be trying something else using the smbclient program):eddie@eddie-ubuntu:~$ smbclient -L eddie-win7 Enter eddie's password: session setup failed: SUCCESS - 0
I'd like to know how to connect Ubuntu to the windows 7 share using the nautilus GUI. If it's a bug, I'd like to file it (I think it is). But first I would like some direction trouble-shooting to make sure it is in fact a bug. (I think I read elsewhere on this forum that someone connected Karmic to win7 share, so maybe it's not a reproducible bug. But then again, maybe they weren't using 64-bit Karmic...)
I have a share on my home server with all my music in. When I go to a windows PC (Windows 7) and go to network I can see the share, but when I try to connect in ubuntu by going to places>network>windows network. I get the error: "Unable to connect. Failed to retrieve share list from server". However when I try the connect to server option and specify the IP address its fine. I have tried this with the firewall disabled with the same results. I am trying to get my family to use ubuntu and I don't want them to have tp specify an IP address.
View 8 Replies View RelatedI can connect & share my dual-boot PC with no problems under WinXPPro using wired or wireless. (I've another thread going trying to get the wireless-n usb adapter to work.) Two questions so I can get the wired shares to work. I want to copy beaucoup files from the Win7 PC to the dual-boot PC. When booting into XP, no problems. When booting into Ubuntu 10.04, nothing. I can see the Win7 PC but can't access it. My two questions then are these.First, is there some switch to enable fire & drive sharing under Lynx as there is under WinXP / 7? Second, how does one set the IPv4 address? Under WinXP it's one address and under Lynx it's another.
View 1 Replies View Related