Ubuntu Installation :: Fresh Install Of 10.10 Hangs After Reboot?

Mar 30, 2011

I'm on an HP Pavillion dv1000 laptop. I used a live CD to install Ubuntu 10.10 to an external USB hard drive. The install completed successfully, but after a reboot I am stuck on a black screen with a white cursor. Before that I see nothing but the initial HP startup screen. I am able to run the live CD without problems, and I have been running Ubuntu from a 4GB thumb drive (which I installed on using the same live CD that I used to install on my current external hard drive). I had no problems whatsoever running from the CD or thumb drive, so I can't figure out why the external hard drive would be so different.

View 7 Replies


ADVERTISEMENT

Debian Installation :: Boot Hangs After Successful Fresh Install

Nov 24, 2015

System is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.

This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).

My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.

Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.

View 6 Replies View Related

Ubuntu Installation :: Acer Laptop Hangs After Fresh Install And First Update / Sort It?

Jun 12, 2010

I just installed 10.04 on an Acer 4736 laptop and was prompted for a software update of about 170 MB.

I went through with the update downloads and installation, got an error message of some packages not being found, and clicked on the "close" button on the dialogue to finish with the whole thing.

Now the Update Manager window with the grayed-out package updates didn't go away, and the cursor would always show the "busy" circle thing. I waited for a while, but nothing happened. I tried opening Firefox to check for anything about this on the net, but it wouldn't open.

So I left it alone, and it the screen went black (screensaver, I guess). When I tried to get back to the desktop, I couldn't. Screen wouldn't respond and it stayed black; no password prompt or anything.

Ctrl-Alt-Backspace wouldn't take me back to the login screen either.

View 3 Replies View Related

Fedora Installation :: Fresh Install Hangs On Boot / Black Screen Blinking Cursor

Aug 9, 2011

After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).

The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.

View 5 Replies View Related

Ubuntu :: 11.04 Fresh Install - Thunderbird Hangs

Jul 15, 2011

I backed up my user directory, did a fresh install of 11.04 (old version was 9.10), and then restored my user directory. (User account information, UID, GID, and file permissions have remained the same.)
Thunderbird hangs w/:
futex(0x7f91c3b02640, FUTEX_WAIT_PRIVATE, 2, NULL) = ? ERESTARTSYS (To be restarted)
The Thunderbird window never appears.

I have tried removing ~/.thunderbird/ and ~/.mozilla-thunderbird/, to no avail. I have tried creating a new dummy account and running Thunderbird -- that works okay. So this has to be something in my user home area, I just can't figure out what. While I can wipe my home area and start over, I have about 60 other users who are going to face this same issue when I upgrade their machines, so I am desperate to resolve the issue some other way.

View 9 Replies View Related

OpenSUSE Install :: Fresh Install + Update & Reboot = Unable To Open Session?

Sep 14, 2010

I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again

View 1 Replies View Related

OpenSUSE Install :: Fresh Install 11.4 Blocks At Splash Screen On Reboot

Jun 30, 2011

I ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.

Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.

Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.

I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.

Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.

So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.

View 4 Replies View Related

Debian :: Jessie Hangs / Freezes After Fresh Install

Dec 8, 2015

I installed Jessie day before yesterday on a freshly formatted partition. After a random time, it hangs. If I am playing music at the time, the music continues for a few more seconds _after_ the mouse and keyboard become unresponsive, if that is useful.

Sine I did not understand how to pick the desktop during the installation, I installed Gnome. Afterwards, I installed KDE. Now I have a lot of Gnome stuff around I don't really need. But they are in principle compatible, right?

This morning, the hang was almost immediate after logging on. Only Iceweasl and Amarok and a Konsole were running. I attempted to start Icedove, when everything hung.

Here is the relevant part of the syslog.

Dec 8 07:41:38 jon-desktop rsyslogd:
[origin software="rsyslogd" swVersion="8.4.2" x-pid="775" x-info="http://www.rsyslog.com"]
rsyslogd was HUPed
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^

[Code] .....

My clock said 07:41 at the time of the hang.

View 7 Replies View Related

OpenSUSE :: Plasma Hangs After Login On A Fresh Install?

Apr 19, 2011

I installed openSUSE 11.4 today and I have a problem. After login, KDE Plasma hangs for about 30sec and I can't do anything. The keyboard and the mouse are working, but if I click, I don't get any response only after about 30sec.

This is a fresh install, 32bit, I'm using only the Oss, Non-Oss and update repositories and the system is up to date.

I have an nvidia 9500M GS graphics card, first I thought it is a driver bug, but I tried both the stable 260.19.44 and the latest 270.41.03 drivers, and was no difference.

I made an another user to try with a clean kde, but the same happened.

I have nothing in my Autostart directory, and I cleaned also the /etc/xdg/autostart dir, leaving there only the pulseaudio related files.

View 5 Replies View Related

Red Hat :: After Fresh Install And Reboot - Get A Black Screen - CENTOS 5.5

Jan 26, 2011

I am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.

View 3 Replies View Related

Ubuntu Installation :: Fresh Installing 10.10 Hangs With Black Screen

Dec 19, 2010

I'm trying to install Ubuntu 10.10 from a Live CD. I can get to the Menu where I get to choose "Try without installing","Install Ubuntu","Test Disk," etc.After hitting ANY of the options, it hangs on a black screen, sometimes with a cursor blinking in the upper left, sometimes not. From all the research I've been able to dig up it seems it's a graphics card issue, but I haven't been able to find anything exactly like my problem as most everything I've been able to find say's theirs continues to install but then causes problems later, or they're trying to load on a dual boot system. I can't seem to get past that first "Install Ubuntu" selection. As soon as I hit enter it goes black.

I'm wondering if I can't load the nvidia drivers from a command line before I attempt to install from the live CD, but I don't know how to do that. I have the .run file downloaded but don't know where to go from there.

View 9 Replies View Related

CentOS 5 Server :: After Fresh Install And Reboot Getting Black Screen

Jan 26, 2011

I am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.

View 16 Replies View Related

OpenSUSE Install :: Reboot Hangs At Many Points?

Jul 1, 2009

Have openSUSE 11.1 and (AFAIK) KDE 4 on an older notebook; worked OK for weeks, then booting became a problem and the OS seemed to go to sleep between keystrokes: now the cursor stops blinking, the clock stops running, and nothing happens after clicking a radio button until the mouse moves. Am now 25 minutes into a reboot, hung at "Unmounting file systems" but it also hung for a while when changing run levels. Is this related to the stability problems with 11.1 I've read about? Possibly KDE? Where would I adjust a config to use kde 3.5 rather than 4?

View 9 Replies View Related

General :: Computer Hangs After Installation In Reboot Process

Dec 9, 2010

I installed Ubuntu in my PC alongside winXP. I downloaded the ISO and mounted it using a virtual image software (PowerISO used in winXP). I installed Ubuntu using wubi in a 20GB partition. During installation it asked me how much space should I give, I gave it 11gb. Everything went fine. I rebooted but now the computer hangs during startup. I went to verbose mode to see what the error is and found out that everything is ok. The last line that apears is "Setting sensors limit [OK]" and then nothing happens. I have tried every option (safe graphic mode/ demo mode etc etc) but the computer hangs.

View 1 Replies View Related

Ubuntu :: Fresh 9.10 Install Reboot Error No Device - Mount Partition Mount: Can't Fin?

Jun 24, 2010

what now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab

so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)

View 1 Replies View Related

CentOS 5 :: Fresh 5.3 Install Hangs With "SCSI: Timing Out Command, Waited 22s"

Apr 5, 2009

On a fresh install on a dell 2650: The install goes smooth and on reboot after Nash starts we get

SCSI: 0:1:0:0: timing out command, waited 22s

repeated for two controllers and 16 devices on each controller. Then boots and runs fine.

View 4 Replies View Related

Ubuntu Installation :: Should Rather Do Fresh Install Of 10.04 ?

May 29, 2010

I upgraded to 10.04, upgrade went fine but now I have lots of problems.My wireless internet is extremely slow, its as if I am on dail up.My Rogers Rocket stick that used to work perfectly is now not connecting to the internet wich is a huge problem for me.Flash player now dont work either and Mozilla thinks its not even installed.I cant change the time and date, it tells me I have to unlock to change the Time but when I click on unlock nothing happens.Who knows what else is not working either.

I am not impressed at all with 10.04, my laptop and Netbook used to work perfectly before the upgrade and now I have tons of problems.What can I do to fix my problems or will a fresh install work better

View 7 Replies View Related

Ubuntu Installation :: Fresh Install Without USB Or CD?

Oct 5, 2010

I have a >5 year old laptop, running Maverick (Ubuntu 10.10) but I need to do a clean install since the video driver is all screwed. The laptop is without USB boot option in BIOS. The CD drive is physically removed.

The HD partitions are
/dev/sda1 (ext4) 15gb mounted as /
/dev/sda2 (extended)
/dev/sda5 (linux-swap) 2gb
/deb/sda6 (ext4) 20gb mounted as /home

How can I do a fresh install??

View 1 Replies View Related

Ubuntu Installation :: Fresh Install 10.04 Not Starting?

May 26, 2010

I have just made a fresh install of Ubuntu 10.04 on my laptop which was already running on windows 7. The installation itself was ok, however, after the restart in the end it did not want to load anything. I get just a blank screen. I am not much of a linux expert, so all I could do is start thee computer via a live cd and see what is there. And it looks normal - windows is intact, new linux partitions are there, GRUB is also there. What should I do? Reinstalling everything is not a proper solution...

View 9 Replies View Related

Ubuntu Installation :: 10.04 - No Grub After Fresh Install

Jun 8, 2010

I have a new 500GB disk, with a partition with Windows XP, one with Windows 7, one for Ubuntu 10.04, one for /Home and one for swap. The systems were installed in that order. But after finishing with the Ubuntu installation, removing the CD from the drive and restarting, GRUB never showed up, and the system went straight to the Windows OS selector; the one prompting to start Windows 7 or an "Earlier version of Windows". So I can't get to Ubuntu, even though it seems it installed just fine.

As a note: just after the installation process ends and it shows the "remove CD" message, it spilled out a list of I/O errors in some sr0 device or something. But I just installed the same Ubuntu on a friend's computer and it showed a similar error list, yet his system works just fine... However, he doesn't have Windows 7, thus no OS selection screen other than GRUB. I didn't want to rush into editing the MBR or re-installing GRUB before I knew I had to do that.

View 9 Replies View Related

Ubuntu Installation :: Upgraded To 10.04 With Fresh Install?

Oct 2, 2010

I want to use my old home partition as home whereas currently there is a 35gb partition that was my old home and a new 'home' within /. how to make my old home recognised by my new install of Lucid.

View 1 Replies View Related

Ubuntu Installation :: Can't Get Fresh Install Of 11.04 Work

Apr 30, 2011

I trying to dual boot Ubuntu/Windows 7 on my computer. Here is my problem:

Info:
I used Wubi and ubuntu-11.04-desktop-amd64.iso.
Main OS: Windows 7 Pro 64bit
Videocard: Nvidia GT 240

Problems (underlined) as they occured:

1) Installed Ubuntu within Windows, rebooted, saw Ubuntu loading screen (with dots) and then I get graphics corruption (it's really bad I can't recognize anything in the screen).

Then I booted in recovery/failsafe graphic mode and I let the installation finish, then automatically rebooted.

2) Let it boot without pressing anything and instead of graphic corruption it boots in terminal.

Tried startx command but it says something relative to "x not found". Then I found out I had to install proprietary Nvidia drivers so I:

3) Booted again in failsafe graphic mode (in recovery mode) and tried to install it but... no internet connection.

I tried "sudo ifconfig eth0 up" and I got: eth0: ERROR while getting interface flags: No such device

NOTE: If I let it boot itself (terminal) I HAVE internet connection (found out with wget and ping commands).

View 1 Replies View Related

Debian Installation :: Netinst - Fresh Installation Of Lenny Or Squeeze (either Or) And Not Install Exim?

Feb 26, 2010

I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?

View 9 Replies View Related

Ubuntu :: 9.04 Hangs Up On Kernel After Reboot

Sep 4, 2010

My old laptop has a broken screen. I tried using an external flat screen and win-xp would not run this screen. This is how I came to learn about Ubuntu. I loaded Ubuntu 9.4 and the computer worked with the external screen. The only problem was that during the boot process the (kernel text?) the white text on black screen over ran the edges of the external screen. Once the Ubuntu was loaded the window fit the screen perfect. Now my new problem. After a year of perfect use, the battery ran down and the computer shut itself off.

When I put the charger back on and rebooted the laptop, the ubuntu partly opens then hangs up on the kernal (white text on black screen) because of the screen overrun problem I can not read the text. I can boot still boot from the 9.4 CD. Is there anyway I can correct the problem by re-installing 9.4 but not wiping out my person data and files. In other words is there any way to repair the O/s that is defective, without losing my work?

View 2 Replies View Related

Ubuntu Installation :: Fresh Karmic Install Runs CPU At 95% To 100%?

Feb 5, 2010

Am running karmic on a P2-350 Mhz with 256 Mb RAM. Yes, I know this is an old computer, but it has been very good, performance wise, since versions earlier than 8.x I think.

But now, after a fresh install of karmic, it is very slow at everything. Checked system monitor and CPU is constantly running at between 95% and 100%

View 9 Replies View Related

Ubuntu Installation :: How To Do A Fresh Re-install In Dual Boot

Mar 27, 2010

I need to re-install ubuntu but I also have windows on the same computer(GRUB). Can I just boot from cd? Is there and option in the live cd for reinstalls or do I have to destroy the partition?

View 3 Replies View Related

Ubuntu Installation :: Can I Install Fresh U10.04 LAMP Without Suhosin

Jun 5, 2010

I'm going crazy with the problem I posted on yesterday about Wordpress not working properly on my Ubuntu systems on the LAN. http://ubuntuforums.org/showthread.php?t=1501043

After comparing results from phpinfo() with those from my public server, making a few adjustments and still seeing the same results, the biggest thing still to be tested is the Suhosin version of PHP. My public server doesn't have the Suhosin version installed. I can't figure out how to change the PHP to one without Suhosin, but I've seen some mentions of it not being installed by default on a fresh version of 10.04.

Is this true, and if so how can I build a LAMP server without Suhosin?

View 5 Replies View Related

Ubuntu Installation :: Fresh Install Not Working Correctly / What To Do?

Jul 2, 2010

I installed Ubuntu 10.04 from a Live CD today. Everything seemed to go fine, I chose to wipe the entire disk. However, it would only startup once. Now, when I turn on my laptop, all I get is a blank screen.

I had a look at my partitions with GParted on the Live CD and noticed that there was a 1 MiB unallocated space just before it. code...

View 7 Replies View Related

Ubuntu Installation :: Fresh Install Fails On Boot?

Sep 13, 2010

Recently freshly reinstalled ubuntu 10.04 on a new / blank hard drive and it now crashes on startup. Quick version: I have a nvidia Quadro NVS 295, it gets to the point just after the bios with the flashing dash, seemingly tries to init xserver / gdm then crashes. Keyboard lights go off but the pc stays on, and just sits there with the monitor in power saving mode. Tried in recovery mode, the blue / grey ascii terminal thing pops up for less then a second then the display crashes in the same way.

Swapping with an ATI card borrowed from elsewhere, the new install will boot quite happily. Anyone know how I can get 10.04 to boot with a nvidia quadro NVS 295? Its a bog standard card and my version of 10.04 I upgraded to on my old hard drive works fine. ts a reasonably new dell XPS 64bit pc.

Longer version:
I run 3 monitors using a PCI-e x16 NVS 295 and a PCI NVS 295. This worked great under 9.10 and 10.04. Boss gave me a solid state HD so trying to install 10.04 on that. However on my first install attempt the live CD failed to load (same problem as above, gets to init'ing the display and crashes with no output). I removed the second PCI card to run with just the 1 PCI-e x16 nvidia card, this time the live CD worked fine and I could install, but I am stuck on the boot problem. Booted into the system using the ATI card and did an update just incase something may have changes / been fixed but the issue persists.

View 2 Replies View Related

Ubuntu Installation :: Fresh Install Doesn't Recognise HDD?

Oct 25, 2010

I'm trying to install Ubuntu 10.10 from a USB stick but neither the install nor the LiveCD will recognise my Hard Disk Drive. They only recognise the USB stick and report that install cannot proceed without at least 2.6GB freespace (of which of course there isn't on the USB stick).

I've installed Ubuntu on a couple of systems before but this is the most advanced and I'm certainly no expert. It's an ASUS P6X58D-E mobo with two WD600GB SATA3 HDD's setup in RAID1 configuration. It's already running W7Ultimate x64 OK on it's own 150GB partition. Of course I can't even run gparted from the LiveCD to repartition. I suspect the problem is the RAID config, but not sure what to do.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved