OpenSUSE :: How To Choose System Default Font

Jul 25, 2010

I'm using openSUSE 11.3 Ever since I started using Linux, I have had problems with Korean fonts. Now I think I am close to the solution. I want to know how openSUSE decide which fonts to use as the system default fonts.I know that I can change them in the Appearance -> Font dialog. But my questios is if those settings were just set as Sans (the default), how openSUSE choose what is Sans?I'm asking this because I found that if I copy Arial and consolas fonts into my ~/.fonts folder, then openSUSE uses them as the system defaults fonts. I don't know if this is correct behavior, but to me it seems very strange, and some applications such as Opera uses whichever fonts openSUSE uses as system default to render webpages, so I ended up having Arial for all my webpages open in Opera. So my questions are:1) How openSUSE decide which font to use as system defaults?2) Are font files in ~/.fonts folder supposedly regarded as defaults?3) Where are the setting files I can edit?

View 2 Replies


ADVERTISEMENT

Ubuntu :: Choose Default System In Dual Boot?

Aug 16, 2011

I wanna use Windows Xp as default system because this laptop is not mine.I tried to use startup manager but it doesn't work. Do you know other way to choose the default os?

View 3 Replies View Related

Ubuntu :: By Default Pango Is Choosing AR PL UMing CN As Font To Render Japanese Text When Current Font Doesn't Have Japanese Glyphs

May 4, 2010

Actually I want to log a bug but I don't really know what package to log it against. The problem is that by default Pango is choosing the AR PL UMing CN as the font to render Japanese text when the current font doesn't have Japanese glyphs. But AR PL UMing CN is a Chinese font, so Chinese glyphs for kanji characters (e.g., 覚) are displayed. This is jarring and confusing for Japanese readers.

This situation mostly arises when you have mixed English and Japanese text. Some applications (for instance Firefox) will allow you to select a font for Asian text. Thus if the text contains only Asian characters it will use the font you select, rather than what Pango would have selected. But if it is a mix of English and Japanese, you end up with the wrong glyphs.

Other environments (like gnome-terminal, or a gedit) have difficulties as well. Since the primary interface requires mono spaced roman characters you run into difficulty selecting fonts. Most Japanese fonts only have proportional roman characters. This means that if use a nice roman font and use Japanese text (for instance file names), you end up with Chinese glyphs. What I want is a mechanism that will work across all of Gnome for selecting the font I want to use for Chinese characters. That way I can choose either Japanese or Chinese glyphs.

I realize this is low priority. It only bugs me a little, but many of my Japanese colleagues are put off from using Ubuntu because they are confused by the Chinese glyphs that pop up on my screen from time to time. As I said, I'd like to file a bug, but I'm not sure against what package...

View 2 Replies View Related

Fedora :: Upgrade To KDE 4.4 And "Configure Kmail" Displayed In The Default Font No In Console Font

Feb 25, 2010

In all previous versions of KDE I had Console8x16 set as KDE font for all cases (Settings->Appearance->Fonts). After tonight upgrade, this (only!) font is not working. I can see it in font manager, I can set it in ...Appearance->Fonts, but actually remains default font. Two of about 30 attempts somehow (can not reproduce) succeeded to set "console 12" font, but it disappeared after restart.

1. What can be the problem in 4.4?
2. In /usr/share/fonts tere are 3 files named console8x16.pcf, console8x8.pcf and console9x15.pcf, but in the font list in Appearance->Fonts I can see only 2 - one named "Console" (seems to be 8x16 and "console" (8x8). File 9x15 does not appear at all. Why?

Last results of attempts: cannot use console font in part of areas, while part works OK. For example: kdevelop editor, kmail message body text works OK. But kmail other parts - does not. The most interesting is that although setting the kmail body message text to console displays the message body text correctly (with console font), but the example message in "Configure kmail" dialogue "The Quick Brown Fox Jumps Over The Lazy Dog" is displayed in the default font, as if there is no console font!

View 3 Replies View Related

Ubuntu :: How To Choose Default Boot Kernel

Sep 24, 2010

I am currently using Ubuntu Lucid on my desktop (stats are in my signature). I have an older computer, with an Intel i8xx chipset as my graphics card. This has had some instabilities on the previous two Ubuntu releases for me (10.04 and 9.10) which I am hoping will be fixed for Maverick, but thankfully the Ubuntu Wiki managed to provide me with fixes.

After much tweaking and some luck, I was able to get Ubuntu to work without constantly crashing on kernel versions 2.6.32-21, 2.6.32-22 and 2.6.32-23. Unfortunately, when 2.6.32-24 and 2.6.32-25 came out, I was unable to cease the crashes.

While I am still looking into tweaking the latest kernel version to work perfectly, I would like to know if there was a way for Ubuntu to default boot into a kernel other than the latest. This is because I want to run 2.6.32-23 by default (the latest kernel that I have tweaked properly) until I can configure 2.6.32-24 and 2.6.32-25 as well. I have less computer-savvy family members that use my desktop as well, and it would be a pain for them to have to press shift at every boot and have to select the correct kernel.

View 2 Replies View Related

OpenSUSE :: Can't Change Font - Font Size FIrefox 3.6.8

Aug 16, 2010

I can't change fonts in Firefox preferences (Content).

My OS is openSUSE 11.3, KDE 4.4.4. release 8.

Any type and size of font I use, nothing happens. It's still same font which I choose for the first time I've started Firefox afer installing openSUSE 11.3.

View 4 Replies View Related

Fedora :: Change Default Font Used By Lpr?

Jan 27, 2010

Whenever I use lpr on the command-line to print a text file, it uses DejaVu Sans Mono as the font. Is there a way to change this? I'd like to use Terminus as the font instead. I found that CUPS uses Courier as the default font for text files, so somewhere Courier is being aliased to DejaVu Sans Mono, and I have no idea where.

View 2 Replies View Related

Fedora :: Set Default Font In 14 Lxde?

Nov 17, 2010

i want to set all gtk program default font, how to set? for example, firefox, emesene, and etc..

View 1 Replies View Related

Ubuntu :: Default Title Bar Font In 10.04 / What Is It?

Aug 15, 2010

What is the default title bar font in 10.04? I changed it and it seems selecting themes don't restore it..

View 2 Replies View Related

Ubuntu :: Set Font Settings As Default?

Jul 19, 2011

I changed font settings in appearance utility today. But now desktop appearance and firefox fonts are too bad and I need to set it to default setting. How can I do that?

View 4 Replies View Related

Software :: Name Of The Default Emacs Font

Jul 4, 2010

I'm using ubuntu 9.04. I use emacs for almost everything. I used emacs that I compiled from the source on my laptop. I liked the default font that came with it. So I never cared about the font. For some reasons I have to switch to another laptop where emacs is installed from the package. I donot want to go through compiling the source again. I would like to know what is name of the default font in emacs. I donot like the default font that comes with the ubuntu package.

The font I'm talking about is the font that is usually found in most emacs written documents. Similar to this webpage (web browsers might render this differently) . And also this webpage. describing font without knowing the name is difficult . The second link gives a better idea. (Hopefully :-))

Also I read about cse-huji-default-font but M-x describe-variable says it can not find the variable. (Is this related to my problem??)

what the default font of emacs is how to set it.

View 2 Replies View Related

General :: Df Vs Du / Choose Between Them In System?

Aug 29, 2011

I need to check the used space in some folders, and I need it to be fast to check because it will be inside a script.

Which command should I use, "du -h" or "df -h"??

View 4 Replies View Related

Fedora :: Can't Find Any How To's For Changing Default Font?

Jul 23, 2011

Been googling around but can't find any how to's for changing default font. Is this possible to do.

View 2 Replies View Related

General :: Setting Default Font In Emacs 23.2.1?

Apr 2, 2011

I'm using emacs 23.2.1 with quack on Linux and trying to set my default typeface to Inconsolata Medium 13. It is installed on my system (debian sid) and can be set manually per buffer in emacs. However, I would like it to be used throughout and by default. My suspicion is that quack's mode is somehow conflicting.

I've searched a good deal looking for information on font customization in emacs. Although there is documentation and examples out there, I've found them fairly incoherent when taken together and nothing specifically addressing this issue. Here is my .emacs

set-default-font "Inconsolata-13")
Turn on visible-bell, get rid of beeps
setq visible-bell t)
Hilight the selected region
setq transient-mark-mode t)

[Code]...

View 2 Replies View Related

Ubuntu :: Changing The Default Devanagari Font?

Apr 13, 2011

When I recently installed a unicode devanagari font (raghindi.ttf), it was set as the default devanagari font. The original one was better. How can i change back?

View 2 Replies View Related

General :: What File System To Choose

Jul 12, 2010

I'm still to install Linux (waiting for a replacement of a bad DIMM) on my new box. It will probably be CentOS, following 'Rubberman's recommendation in forum/coffee-lounge/166195-distro-recommendation-development-use.html .

I assume (as I haven't installed Linux before) there could be a choice of file systems. Is there any recommendation on what I should/could use ?

View 9 Replies View Related

General :: Reset Font Configuration To Default Settings?

Jan 30, 2011

I have been doing some customization to my ubuntu Box related to font settings. Now all the font settings for whole system have been badly scrambled. I am feeling it very hard to reset all the settings too default again.I have been modifying system---> Preference ---> Appearance. if there exists any way to reset my font configuration to default.

View 1 Replies View Related

Ubuntu :: Make Default OpenOffice Font Color In 10.04?

Aug 25, 2010

I keep forgetting to change the font color to black in OpenOffice.org in Lucid. This is a pain when printing, but the bigger problem is with writing up formulae. How do you change colors in Math (or make it default to black)?

View 1 Replies View Related

Ubuntu :: Change The Size Of The Default Font In 10.10 Bigger?

Dec 11, 2010

I have just installed Ubuntu 10.10, the latest version, into my computer. But I notice that the font is small when browsing the web using Firefox. I need to have a bigger font because of my shortsightedness.

View 2 Replies View Related

General :: Increase Xdialog Default Font Size?

Feb 15, 2010

From inside my bash script, is there a way to increase my Xdialog default font size? If not, is there any other way to do it? I found a commercial program using Xdialog with instructions on increasing the font size, but they did not say how they did it. But, it does mean it can be done: [URL]

View 3 Replies View Related

Software :: Kjots - Setup Default Font And Its Size?

Jun 16, 2010

Size is 9, I want 10. Can't find where to set it up...

View 3 Replies View Related

Ubuntu :: How To Choose Winrar Prompt To Choose Action

Feb 16, 2010

I was extraction some file through command line then I encounter on notification from winrar. This file exist what u want to do
replace
never
quite
I don't want that winrar will prompt me to choose action. Everytime whenever this situation occur it will overwrite / skip that file
Syntax I am using for unrar
rar e -pmypassword filename

View 8 Replies View Related

Fedora :: Cannot Choose Wich Operation System To Log Into?

Jun 19, 2010

user that started using Ubunto 6 month ago and I have now also installed fedora 13 to see wich operation system I like best... I have 3 primary partitions 1 for windows 1 for fedora and 1 for ubuntohen I installed ubunto I had a LILO (linux loader) like program that made me choose between Ubunto and Windows at start up... after installing fedora it goes automaticaly to fedora w/o making me choose... I can still mount my win/ubunto partitions so I haven't messed up compleatly... how do I "restablish" the linux loader deamon so that I can choose freely between the 3 operation systems?

second... when I installed linux stupid windows killed my backup hard drive where there are a lot of valuable resarch data... so now I have a 6 gb "unalocated" partition that I would love to be able to recover.... I would appriciate if somone had the answers to my guestions... so fare I like fedora because it seems better organised than ubuntu though the difference between the two linux distrubitons are hardly notacable

View 4 Replies View Related

OpenSUSE :: Prevent Web Browsers From Using The System's Default Colors?

Aug 1, 2009

I have two problems related to color scheme. First, is there any way to prevent web browsers from using the system's default colors? I use a dark scheme, specifically Obsidian Coast in KDE and Industrial in GTK. This doesn't behave well on web pages in Firefox, Arora, and Konqueror. (Opera is fine.) Sometimes a site's stylesheet will specify a text field's text color to be black, but its background is not specified, so it defaults to black-on-dark-gray. I've also seen such a field's background color specified as white while the text color was not, so it ended up being light-gray-on-white. Is there any way to keep browsers from ruining web pages? Also, even if the stylesheet doesn't specify the colors, the dark text fields and buttons still stick out like a sore thumb on a warm or bright page.

My second problem is this: I have a saved session that brings up my applications every time I log in, but the GTK apps Pidgin and Evolution don't match the GTK color scheme until I quit and start them up again. Is there some way of fixing or working around this problem?

View 4 Replies View Related

Ubuntu :: Can't Choose Between Xp And System When I Restarted Pc Login Directly / What To Do?

Jul 2, 2010

I reinstall ubuntu but when i restarted my pc is login directly into ubuntu i can't choose between xp and ubuntu ....what can i do?

View 9 Replies View Related

Ubuntu Installation :: Cannot Get To The Screen That Allows To Choose An Operating System

Dec 2, 2010

I recently upgraded to the newest version of Ubuntu. I dual boot with Windows 7.

All was going fine the first few times I used my system after the upgrade but I have now run into a serious problem. I'm not that technical so will explain this as best i can.

Basically, when I switch my computer on, I can not get to the screen that allows me to choose an operating system. Before it gets there it just restarts.

I guess its a problem with the GNU GRUB software. It just seems like the computer can't find it and restarts itself. So I can't get into either Ubuntu or Windows at the moment.

View 9 Replies View Related

Ubuntu :: Unable To Choose System Sound - Login Windows

May 21, 2010

I am having a problem with my Lucid L. I installed Mac4Lin and when trying to change login window, grub window, splash screen, or even system sounds, I simply don't have the option.

I go to the application like System-Preferences-Sounds and simply don't have the option to change the system sounds, all I have is 5 tabs without that option.

Login widows is the same thing, I can only choose if I want a login sound or not and that's all, I can't even choose to make auto login since it does not give a user as option.

I tryed also with art manager, but the "Install" button is greyed, and startupmanager does not give me any of those options too.

View 6 Replies View Related

Debian :: No Option In Boot Menu To Choose Operating System

Nov 1, 2010

i had debian linux and windows before but because of some problem in my windows i was persuade to change that but after installing there is no option in boot menu to choose my operating system ,after turning on win7 will work, what should i do? i need my linux immediately.

View 4 Replies View Related

Ubuntu Installation :: Lucid Upgrade: Restore Default Desktop And Font Settings?

May 18, 2010

I upgraded from Karmic to Lucid recently. Before upgrading, I had customized my desktop on Karmic with Compiz, Emerald and new set of fonts. After upgrade (which appears to have gone smoothly, yay!), my desktop retained the previous appearance settings. I want to try the factory default gnome appearance settings for Lucid and still stuck with restoring fonts.

What I have done till now:

0. Enabled Visual Effects from Appearance menu.
1. Theme -> Changed to Human
2. Window Manager -> Still using Compiz
3. Window Decorator -> Switched from Emerald to GTK
4. Font -> Changed first 3 font types in the Font tab to Sans, size 10, 4th to Sans Bold and 5th to Monochrome. Rendering -> subpixel smoothing (LCD)

What I want:

1. Is this the default setting? Have I missed anything in restoring default settings?

2. I have done too many changes to firefox font rendering over time. How do I restore default 10.04 font settings for Firefox? I would ideally love to have an option in Ubuntu which would help me restore factory settings.

View 1 Replies View Related

Ubuntu Installation :: Firefox Shows Bold Font By Default After Removing Packages

Oct 29, 2010

I updated and removed some packages that could not be upgraded, and now Firefox and Google Chrome show web pages in bold font by default. By this i mean that all pages not setting font-weight explicitly.

This is on Meerkat, upgraded from long before (Lucid, i believe). I'm guessing the KDE packages are due to me having Amarok and konsole installed some time long ago, so i assumed i could ditch these.The terminal output from the commands above is attached.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved