Fedora Networking :: Access To The Internet From Our Console?
Apr 29, 2011
After upgrading to F14 from F10, we seem to have access to the internet from our console, and no one is able to connect to server as well. We have static IP from comcast. And all the configurations on the eth0 looks fine. We are able to browse, if we set the server to dynamic ip. Also, we are able to connect another PC (laptop) with the static ip configuration, and browse fine. Read through many messages on this forum, cant get any clues,
View 3 Replies
ADVERTISEMENT
Dec 30, 2009
I have several local users on a F11 box. I want to keep one of those users from getting to the network. I could upgrade this machine to F12, if it offers a better solution.
View 1 Replies
View Related
Mar 7, 2009
I have an valid account,and I used pppoe-setup to set the dial correctly.After the configuration,I typed "ifup ppp0",nothing wrong happens(no news is good news?).Then I typed "pppoe-status",it said I've connected to the internet . I opened firefox,updated my system through yum ,they all said I haven't connected to the network!!!I've formated my harddisk and reinstall my system,but the problem is still.
View 4 Replies
View Related
Sep 4, 2009
I have installed fedora 11 64 bit on a new computer. I have no problems accessing the computers on my local network, but can not get past the gateway. The gateway is running windows XP with IP address 192.168.0.1 and is named "internet". When I boot the new computer in windows, there is no problem. Here is the output of some commands I saw in other posts with similar problems:
$ /sbin/ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:24:8C:7F:10:0C
inet addr:192.168.0.245 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::224:8cff:fe7f:100c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]....
View 13 Replies
View Related
Jul 7, 2010
I installed Fedora 13 on my laptop today after deleting a badly screwed up Windows XP partition. Everything installed smoothly even my Broadcom drivers but I can't seem to figure out how to get Firefox to access the web with a URL.
I can ping Google, and can get to it in Firefox if I use the IP address from the ping, but going to [url] in Firefox will give me an error message about not being able to find the server at the web address. I was also able to update from the terminal with yum update just fine. I've tried searching Google for some answers, and maybe I just can't phrase my query right, but I found nothing that I could use to try and fix my problem.
I've attached a HardInfo report which I hope could be useful if you need to know what my hardware is (an HP Pavilion zv5000 laptop).
View 9 Replies
View Related
Aug 14, 2010
I've installed Fedora 13 on a Toshiba Satellite A40 laptop, and am trying to get the wired ethernet connection to work. Network Manager says it is connected, and the connection details (DHCP assigned IP, gateway, dns servers) all seem correct. However, I cannot browse the internet. Checking for updates fails also. I have tried pinging various sites and the results are inconsistent - sometimes it works, sometimes it times out with "unknown host". [URL]... I've searched around for similar issues and tried disbaling ipv6 both in Fedora and Firefox, but this doesn't help either.
View 10 Replies
View Related
May 31, 2011
I have a work network of about 20 boxes most of which are running Windows 7 and one of them is a file server using linux and another is Windows server 2003. Now the local IP is distributed by the router, and no regulation of internet access is done by any of the servers.What I need to do is restrict internet access to select domains, which would probably need DHCP through linux(I think, not really sure), and I need something simple like a 'blabla.conf' file with the allowed websites that I can edit. need to know how to regulate IP addresses through the linux box (all details if possible, I never tried to do that before), and how to restrict internet access also through linux.
View 4 Replies
View Related
Mar 12, 2009
when I try to connect to internet SELinux give my a preventing NetworkManager here is what its say:
Code:
Summary:
SELinux is preventing NetworkManager (NetworkManager_t) "getattr" to /dev/ppp
(ppp_device_t).
[Code]....
View 2 Replies
View Related
Mar 16, 2009
I see from the netspeed applet that my computer is downloading stuff almost constantly. Not a whole lot, 8b - 700b per second while apparently doing nothing. Some of this is just responding to broadcasts from the router, but surely not all. I would like to be able to determine which programs are accessing the internet over that wireless card, with a view to cutting down on my bandwidth usage. Is there a program that can tell me which ones are doing what at a given time?
View 5 Replies
View Related
May 8, 2009
I am building a CarPC which I'd like to have wireless internet access on. I have Verizon phone service so if there is a Verizon air card (not wireless card, an air card so I can have constant access without having to search for hot spots) that would work with Fedora 10 I would be very happy. I don't really know where to start and I can't find too much on Google, so I'm just looking for what options are available.
View 3 Replies
View Related
Jun 16, 2009
Fedora 11 is completely unable to access the internet for some reason, and after some troubleshooting, I've determined the problem to my Motorola 2210 DSL modem. I know my connection is working fine, as it works perfectly in both Vista and 7. I've tried things such as grep 'Ethernet' /var/log/dmesg, filling in the information into the network settings manually, to no avail.
View 12 Replies
View Related
Aug 7, 2010
Bridged successfully but cannot access the Internet.I installed VMware in my Fc13,and installed XP sp3 in the VMware.I can access the Internet in XP,I set the network as Bridged with Fc13,but Fc cannot open a page,but I ping google.com,it can display: Code: Pinging google.com [64.233.183.104] with 32 bytes of data:
then nothing.I still cannot access the Internet in my Fc13.
View 1 Replies
View Related
Oct 4, 2010
I tried to preupgrade to f14 and cancel it after some time. Now, I am facing a problem that I cannot access internet from mobile broadband; but I can access net while i am connected via ethernet or wireless. I have cleared preupgrade files with
Quote: yum clean all; yum remove @preupgrade
$ uname -rs Linux 2.6.34.7-56.fc13.i686.PAE
It can detect my HUawei modem and creating an IP as well. But no Internet. Can you tell me the reason?
View 1 Replies
View Related
Jul 30, 2011
I followed the instructions mentioned in this thread carefully [url] Despite this, I am unable to connect to the internet. It just says connecting and connecting, but it doesn't connect at all.
View 2 Replies
View Related
Aug 15, 2010
I am coming from Windows XP Pro, on the same machine (and where I am writing this post from) so the internet clearly works on XP. On F13, the eth0 connection is activated and the drivers for the NIC chip were installed with the OS. The NIC is Intel Pro/100 VE. The problem that occurs is that the system updater (in GNOME) can access the internet, and installed a bunch of updates after installing the OS. I know it can get to the internet because the updates worked and in the System Monitor, I can see both uploading and downloading occurring during the updates. Now the problem is that when I open FF, I can't seem to get to pages, and I get the usual FF error (pic -- [URL]). However, I CAN get to [URL] as well as [URL] , but I cannot access several other subdomains on fedoraproject.org . I also cannot get to any other page online, ([URL] for example).
View 8 Replies
View Related
Dec 25, 2010
I am using MTS datacard. I have usb_modeswitch installed and have configured the wvdial.conf file. When I do sudo wvdial cdma, the IPs and DNS addresses are also allocated but I still cant access internet.
Code:
dmesg | grep -e 'tty' -e 'modem'
is:
Code:
[ 0.000000] console [tty0] enabled
[ 11.098238] USB Serial support registered for GSM modem (1-port)
[ 11.098352] option 6-1:1.0: GSM modem (1-port) converter detected
[code]....
View 1 Replies
View Related
Mar 1, 2009
I have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:
Code:
eth0
|<--pppoe connection
|
MyComputer
(fedora 10)
|
eth1
|
switch
|
comp.1 comp.2
Win OS MacOS
View 2 Replies
View Related
Dec 30, 2009
I have a wired lan at home with 2 XP boxes connecting to a router to a DSL modem. I want to network my laptop, running only fedora os, for file sharing, printing and internet access. I will be using the laptop probably exclusively for creating/maintaining a Drupal-based (LAMP) e-commerce site to replace our old one for our small family business.
View 4 Replies
View Related
Dec 31, 2010
I managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
View 3 Replies
View Related
Jul 6, 2011
I connected my laptop running with Ubuntu 11 in the LAN but I couldn't access internet.But I could ping to the other computers connected in the LAN. I tried the same thing with windows 7 in the same laptop and I could access internet.
View 1 Replies
View Related
Aug 26, 2010
I have a linux box (fedora) with two ethernet cards eth1 and eth2. On eth1 I successfully configured a PPPOE internet connection. Such that from the server I can browse the internet. On eth2 I wired it to a wireless router essentially to provide the wireless cloud. On eth2 I also configured dhcp, such that the Linux box is both PPPOE and DHCP server.However my clients on the LAN cannot access the Internet.
On passing the routing command I get
Destination Gateway Iface
196.44.x.y 0.0.0.0 ppp0
192.168.1.0 0.0.0.0 eth2 (my subnet)
0.0.0.0 0.0.0.0 ppp0.
The router (functioning as a wireless access point mainly) has a fixed IP address of 192.168.1.2 and eth2 has IP address 192.168.1.1. The dhcp file running on Linux has been set with option router (Gateway) 192.168.1.1. I cannot figure out how to correctly set the routing table such that my clients on wireless can access the internet cloud. I googled and googled but no solid solution. Any suggestions?
View 3 Replies
View Related
Nov 29, 2009
I've just set up a webserver and forwarded ports 80, and 22, and I cannot access the inernet on that machine but I can connect via ssh and visit a page on the server when on a different network.When I put the router in dmz mode I can connect to the internet properly.
View 11 Replies
View Related
Jan 14, 2011
I have an old Debian distro (2.6) and it is completely stripped down, containing only the very bare minimum in software packages in order to function.I would now like to get internet access on this computer and I have installed a network card and connected it to an ethernet port however I am not sure where to go from there (i have little linux experience when it comes to installing/removing hardware and software).
Would I be right in saying that I need to install some kind of network/internet package in order to gain internet access? If so where would I get this from? and if so is this package likely to interfere with other packages I have installed? preferably I would like to leave everything else as it is. Frankly it only just works in its current state and i don't want a network package updating other packages and ruining all the dependencies and making my life hell :P
To clarify: I do not currently have internet access on the computer in question so I cannot use those fangled console command that download and install packages automatically. I also do not have a Debian CD, nor am I interested in downloading the 30discs worth of Debian distro as this internet connection is super slow
View 6 Replies
View Related
May 9, 2009
I'm having a problem with my wireless router and I don't understand the source of it. I have a DLink 604 router since couple of years and it work without any problem. It is attach to a cable modem. Recently I tried to connect a wireless router (DL 624) in the same setup. But it refuse to connect (etho) to the Internet even if Knemo tell that my computer is connect. I tried everything: disconnect the modem, the router, reboot, update my firmware, disable the wireless, disable DHCP...name it. So I thought my router was the problem, so I just purchase a new one (DIR-628) and guess...the same problem. And as soon I reconnect the DL-604 everything is fine. So there is something with wireless router that I don't understand. And I don't have to say that the Wireless connection doesn't work either. Any clue of what can be wrong. Bye the way I use Mepis 8.
View 9 Replies
View Related
Sep 10, 2010
I'm not really a newbee in Linux but I am a newbee in networking. I have both a Ubuntu laptop and a Gentoo desktop computer. I have just bought me the MBR1000 Cradlepoint router and it works great with my Verizon USB 760 modem plugged in it. I can now send and receive email on my Ubuntu laptop. I like it.My Gentoo desktop computer is just sitting there with no Internet access because my Verizon modem is no longer plugged into it but plugged into the router instead. Only my laptop now has Internet access. The laptop has an integrated wireless card built in the MB but my desktop has no such capability.
Is there a way (besides buying a wi-fi adapter) to get Internet access on my desktop computer through networking so that the router would give both computers Internet access at the same? My Gentoo desktop does have an ethernet adapter that perhaps I could useThe router has several LAN ports and one WAN port, both unused.
View 2 Replies
View Related
Feb 5, 2011
Could you pleaseme out.I have installed Virtual BOX on windows 7.Ubuntu i have installed on virtual box.Now i want to access internet from the Ubutu VM.
View 5 Replies
View Related
May 16, 2011
I'm trying Ubuntu 10.04 but I can't figure out how to connect to the Internet. I've run lspci -k & sudo lshw -C. This is the result code...
View 3 Replies
View Related
May 27, 2011
I am new to Linux, But, I installed it, all went well, but now, I can't access the Internet.So, I don't know what info you guys need, so just ask.Also, if it helps, I am using Ethernet (Well, I think it's Ethernet, it is a yellow cable with a rectangle end.
View 8 Replies
View Related
Mar 4, 2010
im using mandrake linux 2010.0 , and i connected my router cable (dlink) to the computer, and it detects without needing configuration to the 'eth0' and it shows me the ip the dns and gateway, everything ok, but then i go in firefox it says that i couldent connect because theres no internet connection,ive looked at the proxys the firewall, tried to uninstal the eth0, the ppp0 and install then again and still the same,does any one have an idea of what could be?
View 9 Replies
View Related
Apr 23, 2010
I have my desktop and laptop connected using an "Cross Over Cable" to transfer files. Each PC also has a wireless card which is used to connect to the internet. Today, the card in the desktop went bad, so I want to access the internet from my desktop through my laptop. Here is the specs running Ubuntu 9.10
****DESKTOP****
eth0 (Wired NIC)
IP 10.1.1.10
Bcast 10.1.1.255
Subnet 255.255.255.0
Route 10.1.1.0
[Code].....
View 15 Replies
View Related
