Ubuntu :: Wine Kills All Sound - Winecfg
Oct 15, 2010
Has anyone got wine to funtion normally in Lucid 32bit... If I launch anything
Pokerstars
Full Tilt
StarCraft II
Call of Duty 4
All my sound for Ubuntu is killed... if I close all wine programs sound resumes..Sometimes and other times requires a complete reboot. I read that this is due to PulseAudio I'm not sure of the difference between
Alsa
OSS
Jack
EsounD
I'm not a termial whiz or nothing but I get around... great at following directions I installed wine from repositories an winecfg sound to ALSA Even know just to make sure I had ALSA right ( while listening to rythembox ) Even going to winecfg > sound Killed my sound from rythembox.
View 1 Replies
ADVERTISEMENT
Jan 13, 2010
openSUSE 11.2 32 & 64bit
default repos + packman, nvidia
wine v 1.1.28 (default)
I was completely shocked to find that the new Wolfenstein demo works perfectly under this version of wine, but sadly I get no sound. winecfg doesn't play any sounds, just a faint humming sound when testing, and I get the same thing when playing the demo. I've had the problem of sound sharing on this system with each install I do, and I've installed/re-installed many many times so far.
View 3 Replies
View Related
May 27, 2010
This is not a deal breaker for me, but it is annoying. I'm running 10.04 and have an eVGA GeForce 210 card. I'd like to install the restricted video driver, since watching full screen video is extremely choppy. The problem starts when I install "nVidia version current" (only one available) from the Hardware Drivers. I reboot, and I have no sound. Video works wonderfully! But, no sound. I check, and basically it seems to be indicating that I simply do not have any choices for enabling sound. y sound is onboard from my Gigabyte EP43-UD3L motherboard. I've disabled the video driver, since I would rather have sound with small screen video than no sound at all.
View 1 Replies
View Related
Mar 28, 2016
Whenever I try to play AC3 audio, after a few minutes, the audio dies and never recovers. This doesn't occur with mp3's / etc, although once the audio dies because of AC3, it's gone for good. So this is probably related to surround sound(?).
After I lose audio, speaker-test produces
Code: Select allWrite error: -5,Input/output error
xrun_recovery failed: -5,Input/output error
Transfer failed: Input/output error
K-Mixer won't even open afterwards. I flipped from GNOME to KDE because of this problem (PulseAudio freezed the system entirely).
Additional info:
Code: Select allAudio device: Creative Labs EMU20k2 [X-Fi Titanium Series] (rev 04)
Output device: IEC958 Non-audio output
View 6 Replies
View Related
Mar 29, 2011
Play a song in Amarok and then press the space bar to pause. Press the space bar again to resume and Amarok starts playing again with the status bar moving and the timer counting down, but no sound. If I move to the next song, sound starts working again. Or if I double click on a different song, sound works. If I use the xine backend, the problem goes away. I'm using Amarok-2.4 and KDE 4.6.1.
View 6 Replies
View Related
Sep 26, 2010
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
View 2 Replies
View Related
Jan 30, 2010
im running arch and am trying to get wine running properly on my normal useracount. When i try to run winecfg i keep getting this error saying "wine: '/home/me' is not owned by you, refusing to create a configuration directory there". I have serched the forms for the past hour or so and for the most part peopel have been able to resolve it with chown and or chmod. Iv done bolth and have come up empty so I thought it might have been a fstab problem so I double checked my settings and it checks out.
/dev/sda6 swap swap defaults 0 0
/dev/sda7 /boot ext3 defaults 0 0
/dev/sda8 / ext4 defaults 0 0
[code]....
View 4 Replies
View Related
Jan 14, 2010
as soon as i start a windows app or go into the wine config the sounds coming out of ubuntu just stop and the only way to get them back is to restart. does anyone know how to fix this?
View 2 Replies
View Related
Mar 9, 2010
when I open Guitar Pro 5 in Wine (v1.1.40), there is no sound. I go into the audio settings to select Timidity, but it's not listed. I do have it installed and I can launch commands such as 'timidity anything.mid' to get it to play midi's, but other than that, it doesn't work. When I run Wine and launch Guitar Pro 5, I get this output:
Code:
ALSA lib conf.c:2700:(snd_config_hooks_call) Cannot open shared library libasound_module_conf_pulse.so
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0
ALSA lib pcm_dmix.c:947:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
[code].....
View 9 Replies
View Related
Nov 3, 2010
I have installed Tabit in my ubuntu 10.10 installation with wine (fully updated and configured) and i can not get any sound to output. I have FL9 installed with the same wine installation and I have no issues getting sound to output... Weird enough, I installed tabit in my unconfigured wine installation when ubuntu 10.10 first came out and it worked perfectly but now that I've formatted and reinstalled Ubuntu 10.10, I get no sound.
I would just like to add that I would just go to tuxguitar but my band members all use and are very comfortable with tabit so, if I can't get tabit to work, nothing else will work for me. Don't worry though, I love ubuntu and I'll stick with it on my laptop at all costs. I would just like the convenience of being able to use tabit and fl studio 9 while out of my room as to not wake up the wife and kid...
View 1 Replies
View Related
Jul 10, 2010
After upgrading to 1.2-rc7, sound stopped working in WoW. Switching between OSS and alsa has no effect.
Others are having this issue: [URL]
Is there any easy way for me to downgrade to the last version? Hate to have to install from source.
View 1 Replies
View Related
Nov 1, 2010
I am having sound issues while playing some games under WINE. for this I will use World of Warcraft as it has options for different sound engines. The problem is that I will have sound running fine for a while after a fresh reboot. It will seem fine for a good half hour to an hour and then suddenly it will stop. It will still be present in the applications list in sound preferences listed as 'ALSA plug-in [wine-preloader]'. muting/unmuting and adjusting the slider has no effects. Enabling and disabling sound in the game also has no effects. Here is what I have tried thus far to try to remedy it:
tried all of the various sound options in winecfg (some simply don't produce any sound at all on a fresh reboot - OSS, for instance) tried with and without padsp tried the various sound engines in Config.wtf tried WINE from the Ubuntu repositories and the developer's PPA tried lowering the sample rate and the bits per sample in the audio tab of winecfg tried fiddling with the sound preferences applications controls I am not adventurous enough to try to install OSSv4 so that doesn't seem like an option for me. it is important to note that sounds not coming from WINE function as normal even while WINE is producing no sounds.
View 9 Replies
View Related
Jan 2, 2010
I have Wine installed in ubuntu/Kubuntu Jaunty and I can play games like Roller Coaster Tycoon fine in it (it works great and has sound) but when I try to use my disk for Ear training (which is an .exe file) I can view/use the program perfectly except there is no sound, the disk works in the school computers so I know its not faulty, but the sound just doesn't work in Wine.
I changed the format in Wine to all the different Windows (Vista, XP, 2000, etc.) and the sound didn't work in them either, everything in Alsa mixer is turned up 100% and I've tested it with both my head phones and computer speakers, but theres never any sound.
View 1 Replies
View Related
May 17, 2011
I ended up upgrading my wine version to 1.3.20 before it was released to the PPA repos. I downloaded it via git, compiled & installed, but now it did not detect my drivers anymore. It even warned me when i ./configure'd it, but I didn't listen. I tried, also, remove purge all wine packages I own and reinstall them from Ubuntu, but the dud 1.3.20 version is still installed. Is there a way to bring the sound back? Or, is there a way to revert this installation and make me able to install 1.3.19 back?
The following message appears when I access the "Audio" tab @ winecfg:
Code:
Found driver in registry that is not available ! Remove 'alsa' from registry?
View 3 Replies
View Related
Jul 19, 2011
i'm using Wine in fedora and i have a sound problem. the games and apps that i installed through Wine has no sound What can i do to enable sound?
View 2 Replies
View Related
May 31, 2010
I'v spent 3 days in google hell I'v learned alot but still cannot find a solution to my problem. I'm trying to use for a lack of terms 'Stereo Mix' I have Paltalk Messenger installed under Wine 1.01 everything works fine, including my mic I want to loop my sound from rhythmbox and play it in IM/Chats One of the Best resources I have found was Ubuntu 9.04 Sound Solutions Forum Topic
Every package is installed from the link above and I am able to record from rhythmbox using Gnome Sound Recorder but I am unable to send the sound to Paltalk. I'v also ran into a few resources that talk about creating a virtual sound card and then looping the sound back but I was unable to find a good clean howto I'm using Ubuntu 9.04 32Bit I upgraded all the pulse audio tools and now when I key on mic I can click my recording tab see my wine app and switch the stream over
View 2 Replies
View Related
Apr 2, 2010
my friend is having major sound problems when she is trying to play counter strike 1.6 on her ubuntu (latest version). she can only play it trough wine emulator and wine itself is updated to latest version.
from what she told me and i seen - most of the times she doesn't have sound at all. can you maybe point me on what should we do about it? i googled some "solutions" like disabling oss and etc. but it doesn't make any difference (killall pulseaudio for example removes all of her sound like videos sound and etc.).
View 2 Replies
View Related
Mar 19, 2010
I'm trying to get the bizarre game Plants vs Zombies running under Wine on my F 11 desktop. It took a registry tweak to get it to run, and then, only in a window, not full screen. Alas, the sound doesn't work. Checking in Wine Configuration, Pulse Audio is selected, but it fails the test, as do all of the other options. It's not a make or break issue here, but I'd like to get it working right.
View 3 Replies
View Related
Jul 30, 2010
I use Wine to play some games, but unfortunately my sounds doesn't work at all in wine. I have installed:
Wine
Steam
Garry's Mod
Red Alert 2
How can I enable sounds in Wine, without wine I can hear sounds normal.
View 1 Replies
View Related
Sep 20, 2010
After upgrading to the latest Wine, I find one of my most prized Win apps no longer works properly (no longer detects sound hardware). Seeing as the previous version (1.2.0-2) of Wine worked fine, I have located its (16) rpm's in the Yum cache, but irrespective of which one I double-click to install, it fails, complaining one of the other packages isn't already installed. Shouldn't the installation-manager automatically detect that these all of these dependent-on-each-other files are present? The 'newest' previous version in the repository is 1.1.38 - really old in other words - and my app works with it but I'd really like to install the newer version in the Yum cache.
View 3 Replies
View Related
Mar 19, 2010
when I tried to install wine I got "Missing Dependency: wine-gecko is needed by package wine"so I looked for wine-gecko and download it but also when I tried to install it I got "Missing Dependency: wine-gecko is needed by package wine"it seems that I am in loop each package need the other what to do please?
View 1 Replies
View Related
Feb 20, 2009
I can get sound in wine but when I'm trying to run spotify via wine I get "There is a problem with your sound card" error, anyone know how to fix this? I'm running fedora 10 64bit
View 7 Replies
View Related
May 3, 2010
I'm running PC/OS 10.1, which is based on Xubuntu, I've got Compiz and everything installed on here. However, if I've got Compiz activated when I log out, I find myself with no titlebar or frames whenever I log back in. Thankfully, this is easily corrected by opening the Fusion Icon and going back to Xfwm and then going back to Compiz, where I have the titlebar and frames and eye-popping effects and the whole nine yards. But it'd be a lot nicer to not have to deal with having to correct that every time I log in in the first place.
View 1 Replies
View Related
Jun 19, 2011
Three times so far I have had to re-install ubuntu because I installed an updated or new Nvidia graphics driver for my GeForce FX 5200 The first time, using Natty Narwhal, I installed an updated graphics driver, and upon reboot, I was presented with a blank screen that did nothing. Being a first-time Ubuntu user, I assumed it was me, or a bug in the new release. So I burnt a Lucid Lynx cd on another pc, and installed that instead. Same problem when I installed a new graphics driver, again via Admin>>Hardware Drivers. Reboot yielded a blank screen. Booted from cd again, as I had no files yet to worry about, and everything seemed to be fine, providing I stayed away from that tempting hardware drivers button.
I then accidentally installed a new driver when installing the dependencies(via terminal) for OGRE (Object-Oriented Graphics Rendering Engine) This time, my terminal froze, Firefox wouldn't boot, and a reboot yielded a blinking, blank login screen that did not do anything. Obviously, I'd like to have a graphics driver, as currently I can't run anything that needs 3d acceleration (Games, 3d simulations, even Desktop effects), but it's not absolutely necessary. So if nobody can suggest a fix, short of a new computer, new graphics card etc, can anybody suggest a way that I can stop myself accidentally installing anything driver-ish? The driver worked fine on windowsXP, but there's two reasons I'm not going back to that: a) I hate it. Hate, hate, hate.b) I've lost the activation key that came with computer, so I can't reinstall.
Further detail can be provided on request. Computer is Dell Dimension 2400, 256Mb RAM, Hard drive is almost empty. Old and slow, but I like it.
View 5 Replies
View Related
Aug 2, 2011
I recently installed 10.04 on my Dell Inspiron 9300. After a clean install, the ATi drivers (for a Radeon x300) were automatically installed, and worked fine out of the box. Soon after all of this, I decided to run an update. Now, while my drivers are listed as installed in synaptic, nothing is recognized, not even the command "aticonfig" when typed in the terminal. When I try to access the Catalyst Control Center, it tells me that either I have no video drivers, or there's a problem with my card.Is there anything I can do about this? I've already tried reinstalling the drivers from synaptic.
View 2 Replies
View Related
Dec 28, 2010
I had applied all the updates available on 23rd Morning and Keyboard and mouse stopped working thereafter. The updates amounted to around 130 MBs in size. I can use the keyboard to select other items in Grub menu and it works upto the login prompt. I can change the console to Ctrl+Alt+F1 to F6 before the login screen. No response thereafter. I have set the autoloin after 10 Seconds and the notification asks me for enabling compositing.
When booted in recovery mode, the screen remains blank without the options like Repair Packages, Root shell, Resume etc.BTW, Ctrl+Alt+Del reboots the blank screen.What to do now? I thought that Reovery mode boot will give me the menu of these above items.The keyboard and mouse freeze just at login screen. So is it related to .gconfd or Gnome? Or can I unistall all the updates I had installed on 23rd December?At least how can I have the list of installed applications and my customisations in case of a reinstallation?Should I renstall and start all over again without any clue what I had done earlier?
View 1 Replies
View Related
Jun 22, 2010
I'm keen to install Ubuntu on my old laptop (HP ze4500 2.4GHz 1Gb Ram 120GbHDD) But during installation (I presume as soon as the screen capture function becomes available) A zillion screen capture screens appear and lock up the system. It may be due to my prtscn button being missing. Actually its just the plastic part and the rubber button mechanism is still present. The button works without the plastic part completely fine in windows. That is to say I can press it when I want to use it and it works and it does nothing noticable otherwise.
Seems like a pretty trivial way to kill ubuntu, perhaps there's a trivial way to solve this problem on my laptop without replacing it? I do get through to the desktop sometimes if i carefully dont touch the keyboard and shutdown the screencapture panels as they appear. It doesnt seem to matter which method i use to get into the desktop though livecd/install alongside windows/fresh install.
View 7 Replies
View Related
Apr 15, 2011
How can I uninstall / purge wine and any wine installed windows programs?I've tried deleting .wine (hidden folder)but in /usr/bin/ there are a number of wine related files.And wine sub menu still appears in Applications menu
View 6 Replies
View Related
May 5, 2010
Just updated the kernel to 2.6.32.22 as requested by Update Manager, and was rebooted into low graphics mode, the nvidia kernel module failed to load.I tried installing the linux-headers-2.6.32.22 but this made no difference. This could get ugly if such an early update mucks up
View 9 Replies
View Related
Sep 16, 2010
I searched online, but I was unable to find anything on this. I recently tried to install a program, but it did not work. After that, anytime I would open a folder that is located on the local computer, it would close out of Nautilus. I thought that was the extent of the problem, but I just discovered that if I click "Open" on any program, it closes that program out. I was able to plug in a jumpdrive and browse the files on it, but as soon as I clicked on a folder that was local, it would kill the program. I am using 8.10, by the way.
View 1 Replies
View Related
