I want b able to recover or reset the password that i lost. I have ubunto installed with windows vista. I used the following link for guidance: [URL].. tried recovery mode in grub it always asks me the same thing:"Give root password for maintenance". I also tried to edit and boot the kernel unfortunately it did not work. So i never have a prompt, it still asks me for the password.
View 2 Replies
I'd like to keep root pw==sudo pw==user pw on a box with Code: $ lsb_release -ds Ubuntu 9.10 $ uname -rv 2.6.31-22-generic #61-Ubuntu SMP Wed Jul 28 02:02:56 UTC 2010 Just now it hung going to sleep, so I shutdown via BRS. On cold boot, HD mount failed and I got the prompt to hit Esc to goto maintenance shell. I did that, got the prompt for the root password, and entered my sudo.
That failed! though it has worked before ... but I changed my user password on that box recently, and I'm pretty sure I haven't needed to fsck between then and now. I'm wondering: What do I need to do to set my root pw? I was able to C-d out of the shell, and karmic took care of itself, but I'd prefer not to rely on that. Is there a way to make my root pw always equal my user pw? If so, is that a Very Bad Idea?
UPDATE: This is a bug: [URL] Evidently the problem is with plymouth because a workaround is to add "rd_NO_PLYMOUTH" to the kernel boot options. I don't get a prompt for my disk encyrption pass phrase---just a flashing cursor---but that's a small price to pay for being able to run fsck when the root filesystem wasn't umounted properly.
I have fully updated f13 (as of today) on a laptop with all ext2 file systems (It has nothing but flash memory.) If it's shut down without unmounting all file systems, it drops to a shell and asks for the root password to run fsck when it's rebooted. Every key press is treated as though it were <enter>, with a response to the effect that the password is incorrect.
I just did a net install of Debian Jessie in VMWare Player. I very much enjoyed the install. I chose not to install a desktop. I set the root password as root. And the user as paul/paul. Now I cant login in root, it says I have the wrong password. How would you resolve this?
View 13 Replies View RelatedI lost the password for root on a ubuntu virtual machine. Is there any way to restore it or I need to install a new virtual machine with ubuntu again?
View 2 Replies View RelatedI have lost my password for my root and for my user account.
Code: Select alluser@debian:~$ su
Password:
su: Authentication failure
user@debian:~$ su
Password:
su: Authentication failure
user@debian:~$ su
I have just installed a gust debian 8 on debian 8 host in virtualbox, and when i wonted too login as su/root on the host there where no login possible, is there a way to regain the root password for the host?
I'm new to Linux (had some basic Unix experience in 1995 era). (Teenager) gave me HP2133 mini notebook running SUSE Linux Enterprise Desktop 10. Everything checks good (hardware and software), even wireless networking. Problem is she apparently created Admin/root password but says cannot remember. I cannot even set correct date time... yast is asking for root privilege:
Command: /sbin/yast2 time
Is there anything I can do to re-establish administrator privilege?
When I installed the OS, I wasn't prompted to set the root password. Is this a bug, or did my install hose up?
View 4 Replies View RelatedI m Trying to get vsftpd usergroups to work i accidentally moved a file called passwd from /etc/vsftpd/ to /etc/, resulting in my root access is destroyed! how to restore the passwd file so i can keep working, or do i have to re-install the entire box?
View 4 Replies View RelatedI'm really new to Linux so this will probably sound like a pretty naive question to most users, but how do you change the root password?To install Java, I have to type # su into Terminal,which then asks for the password.What's weird is that when I start typing a password, no characters show up. I don't know if this is supposed to happen or not.I've found a bunch of different sites on the Internet that explain how to change the root password, but none of them seem to work for my specific work station.
I've got Ubuntu 9.10 64 bit. In the GRUB boot menu, I can choose to boot normal or in recovery mode (I'm led to believe older versions don't have this option).I've tried typing # sudo passwrd into Terminal, but I already have a root password set up apparently, so I can't change it there.
I am an absolute Linux Beginner who is being required to do a bit of admin work because the boss just fired the old linux admin. Unfortunately, one of our employees cannot remember her password to her email account and as such I need to reset it on our linux server.What I want to check is that this email account is actually a linux user account and I simply will reset the password for it using the passwd command from the root login. Is that correct?
View 1 Replies View RelatedHow to recover user password and root password in fedora if u forget
View 2 Replies View Relatedi forgot root password and how to change the password
View 3 Replies View RelatedAt the RHEL prompt, I entered the standard user's username/password combo. Linux displays a message box stating:"Your account has expired; please contact your system administrator."Next, I entered "root" in the username field and entered the root password (which expired also--keep in mind that passwords are set to expire after x days). Linux displays a message box stating:"You are required to change your password immediately (password aged)."When prompted to "Enter current UNIX password", I entered the new password (was that the right thing to do?); Linux displays a message box stating:"The change of the authentication token failed. Please try again later or contact the system administrator."I rebooted the system and got into command line mode; somehow I logged in as "root" (don't know exactly how, but needed to change the password there). At the "#" prompt, I type "passwd root"; Linux displays the message "Changing password for user root", followed by the message "passwd: Authentication information cannot be recovered.
View 4 Replies View RelatedUbuntu is installed in dual boot in my machine. I created only one user and unfortunately I forgot the password. is there anyway to recover this password or better have the root password?
View 1 Replies View Relatedhello i am trying to change my password, but when i type in the new password i get this:"The password is longer than 8 characters. On some systems, this can cause problems. You can truncate the password to 8 characters, or leave it as it is."my question is what kind of problem could i get and how can i change so i have to log in every time i start the computer?
View 9 Replies View RelatedIs there any way to give password to the usb storage. means those who know the password can only use the pen drive!
Distro: RHEL 5.x
I want to have /boot as an ext2 (I don't need journaling and I might want to undelete something) and all other partitions in an LVM.When the server starts it will prompt me for the LVM password. I would like to be able to contact the server using SSH (or using another secure method) and tell the password. Since /usr/sbin and all the other partitions are inside the LVM I guess I have a problem?
Is it possible to setup something like this? The SSH session for the LVM authentication does not have to be a daemon. It can be something which just sits and waits until I connect and input the password. And then the "real" SSH deamon kicks in.
So on one of the Linux systems here (2.6 kernel if it matters), there's some weirdness regarding trying to ssh into the system. Basically, if you give it the wrong password on the first ssh attempt, it will give you two more attempts, but even if you give it the correct password, it still won't let you in on those subsequent attempts. (If you give the correct password on the first attempt, it will let you in.)
Example:
Code:
user1@machine1# ssh user2@machine2
user2@machine2's password: <wrong password>
Permission denied, please try again.
The system has sshd configured to use pam (i.e., UsePAM set to 'yes' in sshd_config), but I'm kind of a PAM dummy.
How do I set up a server to where it does not give a password prompt to access a shared folder?
View 1 Replies View RelatedI use an atom based processor of 1.60 ghz on intel d945gclf board. My ram is a zion 1gb @ 533mhz. Hdd is from western digital 80gb @ 7200 rpm. I have a broadband(dsl) connection from bsnl dataone (a state owned telecom service provider). I connect to internet via a huawei wa1003a ethernet/usb/wireless modem which is provided by my service provider. I need a username and a password everytime i connect to internet via dial-up.
I was using windows xp service pack ii. It was nice and easy installing my modem on xp either via usb or ethernet. Both ways it was easy as i have both the drivers with me.Only and main problem was fighting viruses. I tried many free downloadable anti-virus software to protect my maching. Initially they were fine. But after few months they stopped taking regular updates and became non-functional. I also tried symantec corporate v.10. But it has its drawbacks also. It made my machine perform like a snail.I had previously heard about linux based operating systems. But never tried one. As i am an ameteur in using computers windows xp was suiting my needs. Recently i saw an article in the newspaper about ubuntu which is a free open source operating system. And most important to me it is virus free.But here is a problem also. I cannot connect to internet. My ubuntu 9.10 karmic koala is not identifying my modem and a network between my modem and my machine cannot be established. Also i cannot create a dial-up option where i can give username and password.
Ok I just got my self in a mess. I wanted to change a users password and some how changed mine instead. I am the administrator. (go figure) now I can only log on to the users account
I tried old password
I tried no password
I tried users password
No luck all failed. I am off to work so will not be able to respond until tonight so I hope you guys have a few tricks up your sleeve.
I no longer have access to my root desktop. On a session I attempted to change the root username but i apparently assigned it a wrong directory that does not exist. When I rebooted with my new root username, i was instead recognised as a simple user (no root privileges). I tried the console to change to "old" root but root password is not accepted and there is no way to access to sudoer files. it seems that inserting a new username requires root privileges and i am back to square one. Simply logging with old root username and password after restart gives me a blank screen with nothing on it and cannot even reboot.
View 9 Replies View Relatedi used opensuse 11.1 ...there is option for root user to create password for root...but for ubuntu i did not find anything like that...so how can i create root password....or how can i use root
View 1 Replies View RelatedI have been using KeePassX for storing my username and password but badly i lost my master password and so now i couldn't open it..Is there anyway to retrieve the password?
View 1 Replies View RelatedHow do I reset password in unbuntu 9.04?
View 1 Replies View RelatedA friend of mine has told me to set a root password and use root (f.e. switching to su in terminal and work with root rights instead).Is there any way to unset the root password? I know how to use sudo now.
View 9 Replies View RelatedI was trying to edit a file requiring root permissions, so I used sudo. I typed the root password and it failed. This happened three times, and the process was ended. I then logged in as root (su) and was able to navigate to the file and make changes as root. Am I missing something? How would I edit the sudoers file such that this password would work? Or is there another way to log in to the sudo group to make these changes? How do I set sudo passwords?
View 1 Replies View RelatedI just got my computer up and running after several months of not working,nd have forgotten my password for the command prompt. Any help on where I could possibly find it. :/ odd question I know and I apologize. My second question is Im trying to use my android driod phone as a modem for the internet, I will be using the pdanet app so I am able to do this, yet during installing it on my phone it asked me if I was using a 32-bit windows
View 4 Replies View Relatedhow to retrieve lost password to file server storage) running Samba 3.0.14a-Debian? Access to file server from windows PCs via LAN , no direct access.Where the password stored there and how to retrieve?
View 9 Replies View Related
