Ubuntu :: Vsftpd Won't Start With Ssl_enable=YES
Oct 24, 2010
My problem right now is i'm trying to configure vsftpd to work with ssl.
My vsftpd is configured with virtual users and everything works fine (without ssl).
I can ftp to the server from a client on the same network.
Now when i try to enable ssl, the server won't start at all. Actually, if i run service vsftpd start, it look like it is starting, but if i check the processes, vsftpd is not there, and obviously, if i try to ftp, it fails.
So as soon as i turn ssl_enable=YES in vsftpd.conf, vsftpd won't start
The only message i get is in /var/log/daemon.log
init: vsftpd main process (6407) terminated with status 1
init: vsftpd respawning too fast, stopped
View 3 Replies
ADVERTISEMENT
Oct 16, 2009
I'm trying to get my vsftp server to run. When ssl is disabled it works pretty fine, but after turning on I get the following error:
[Code]...
View 9 Replies
View Related
Aug 16, 2011
I am using red hat enterprise 5.7 OS and the problem is that vsftpd won't start. When issuing Service vsftpd start it comes up with failed. I am using the default RPM to install it, also using the default vsftpd.conf
View 8 Replies
View Related
Aug 5, 2010
how to start automatically vsftpd in my server after reboot?
View 5 Replies
View Related
Jan 3, 2010
I am trying to get vsftpd started on my server. I followed the steps outlined here: [url] but for some reason, the daemon is not starting or throwing an error message.
After making all of the changes to vsftpd.conf, if I execute the following commands, here is the result:
View 9 Replies
View Related
Mar 15, 2011
I am very pleased with a new Squeeze desktop that I built. I am use to using BSD style init scripts (Slackware, OpenBSD, Arch) and am trying to tweak my system not to start vsftpd at boot. I use vsftpd occasionally to move large files between computers on my LAN. My inittab shows run level 2 as default.
View 3 Replies
View Related
Feb 10, 2011
Any clue? I'm using the same key for root login and it works fine (also works fine for SFTP but i hate using that cause its extremely slow)
View 2 Replies
View Related
Feb 5, 2010
I have installed vsftpd by "yum -y install vsftpd",disabled anonymous login and set .When I use a linux client's file browser to login using a user account "ftpacc" by ftp://ip_address, its location is "/" instead of /home/ftpacc".When I use a window client to login, its location is "/home/ftpacc"
View 1 Replies
View Related
Oct 15, 2010
I need to get a FTP daemon running on my computer, so I tried to install vsftpd It worked, but later I wanted to try pure-ftpd so I removed vsftpd. Then I discovered I wanted to go back to vsftpd, so I removed pure-ftpd. Now when I type
Code:
sudo apt-get install vsftpd
It returns something like this
Code:
nossr50@robert-HAL9000:~$ sudo apt-get install vsftpd
[sudo] password for nossr50:
Reading package lists... Done
Building dependency tree
[code]....
View 2 Replies
View Related
May 17, 2011
I have installed vsftpd and I configured the whole package and everything worked. But, after a reboot, it doesn't work anymore. Vsftpd is running. When I do "telnet localhost 21" the machine gets connected to localhost. It also succeeds when I type "192.168.2.10" (my internet IP address) or "86.80.107.30" (external IP address). So the connection is fine. I configured vsftpd to allow only given users, in this case the user bourne. Everyone else isn't allowed to use vsftpd. My main account is stan. So when I connect to the machine via SSH, I'm logged in as 'stan'. When I try to log in to the FTP server with "ftp localhost" and I fill my own username I get an error message saying permission is denied, I don't get a chance to enter my password. When I fill in the username 'bourne' it asks for a password, I enter it, and I get the message 'login incorrect'.
But now it's getting weird: When I switch to the user bourne in the shell by 'su bourne' and enter the same password for FTP, I get logged in as bourne. Then, when I enter 'ftp localhost', fill in the username 'bourne', enter its password, the login is succesfull! It doesn't matter where I connect to (local IP, external IP, localhost, or computer name) I get connected with the user bourne as long as I'm logged in to the shell with this user. Otherwise it doesn't work. Does anyone know why? Below is the config file of vsftpd:
[Code].....
View 2 Replies
View Related
Sep 24, 2010
I am building a new server on Rackspace Cloud. When they create an instance, it is a raw install. I have several other instances running Ubuntu 10.04 with vsftpd running just fine.But I have an app that doesn't like php 5.3 so I created a new server instance with Ubuntu 9.1 and php 5.2.Here is my problem... I install vsftpd EXACTLY the same way I've installed it dozens of times on Ubuntu 10.04. But when I try to access it, I get an ERROR 500 "vsftpd: cannot locate user specified in 'ftp_username':ftp. I'm SURE I'm using a valid username & password.
View 1 Replies
View Related
Apr 19, 2011
I recently installed vsftpd and can't see any files I put in the nopriv_user folder.
I want to be able to login anonymously without a password, see files to download and upload files to a pub folder.
After installing and configuring vsftpd I created the ftp_priv user by doing "sudo useradd -d /home/ftp_priv -m ftp_priv".
Then I added a folder /home/ftp_priv/pub with permissions 777 and a test file.
vsftpd.conf
Code:
listen=YES
port_enable=NO
pasv_min_port=55000
pasv_max_port=55100
[Code].....
View 1 Replies
View Related
Mar 22, 2010
How can I log into VSFTPD using a local account? Every time I attempt logging in using an existing Linux user account, I get this message: Code: Status:Connecting to 192.168.100.102:21...
[Code]....
View 7 Replies
View Related
Apr 14, 2010
I'm using vsftpd on my server. When I connect (using file-zilla) from other computers on the same network I can't download any files. I can upload, create directories, and delete stuff, but I can't download. I've disabled anonymous access and enabled local user log-in. My /etc/vsftpd.conf
Code:
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
[Code]...
View 3 Replies
View Related
Apr 21, 2010
I was recently assigned to enchance a ftp-server with SSL/TLS support. When I started investigating I found out that the server is a virtual (openvz) ubuntu machine with vsftpd. Enabling ftps was easy enough, I just added the following lines to /etc/vsftpd.conf
Code:
ssl_enable=YES
allow_anon_ssl=NO
force_local_data_ssl=NO
force_local_logins_ssl=NO
ssl_tlsv1=YES
[Code]...
View 2 Replies
View Related
Apr 21, 2010
Here is my vsftpd.conf file:
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
[Code]....
View 3 Replies
View Related
May 19, 2010
In my house I have a small computer running ubuntu karmic that works as a server/media center.
I would like to have a folder (my ~/public folder) openly available to the entire world via anonymous ftp.
I have read somewhere that the defauld vsftpd config is basically this: no local user login, anon only and sharing a folder called /home/ftp, but I can't get this to work.
Here is my /etc/vsftpd.conf file:
Code:
View 9 Replies
View Related
Aug 19, 2010
i have a server and im trying to use ftp to edit my website with dreamweaver. im using vsftpd and i have access where i can read all the files but i cant add any. any clues?
View 5 Replies
View Related
Oct 28, 2010
I'm having a peculiar problem. I have VSFTPD working and everything works great on my local network! The only problem is that I can't get PASV mode to work over the WAN.
I've tried everything:
- making sure the pasv_enable, pasv_min_port, and pasv_max_port variables are set in vsftpd.conf
- punching holes in Shorewall for these ports via rules
- setting up port forwarding for these ports in my routers (although this might be unnecessary)
The problem, is PASV mode works fine when I access from either router (my server is behind two routers but not from my WAN IP. Could this be a problem with my ISP?
View 2 Replies
View Related
Feb 18, 2011
I made a "test" server recently, put a samba + apache + vsftp server on it. The first 2 work but the VSFTP server is troubling me. On my lan it works. but on a wan: My ISP blocks port 21 so I changed it to 2200, my friend tried to connect earlier (With "ftp://myip:2200") and he had to type in a name and password, he did that (I made him an account)he got 425 failed to establish connection. Now I Re-installed vsftpd again, did the exact same thing and now it just wouldn't connect. saying the webpage can't be found. Question 1: What should I do to let a user acces from outside of my LAN? I think it's because of passive mode: but I have no idea what ports I should open for passive mode? My ftp port is 2200.
FileZilla tells me.
Entering passive mode
Command: List
And than that it can't find directory's
View 9 Replies
View Related
May 29, 2011
Connecting remotely through FileZilla works ok, but I can't connect from localhost (FWIW I'm running WordPress and would like to be able to upload plugins from the dashboard).
I've got vsFPTPd installed and - I think - running:
Code:
# service vsftpd start
vsftpd start/running, process 25782
All ok so far... however I can't see it on any of my ports:
Code:
# nmap localhost
Not shown: 995 closed ports
PORT STATE SERVICE
22/tcp open ssh
[code]....
And of course if I
Code:
telnet localhost:21
That's 'Connection refused...'
Nothing in 'netstat --listen' either.
The odd thing is, I can connect fine using FileZilla.
To confirm, I have
Code:
local_enable=YES
set in my vsftpd.conf.
View 6 Replies
View Related
Aug 4, 2011
I'm running ubuntu 11.04 on two computers, and I had two ftp-servers running fine and well. But then, after a computer reboot, I'm not able to boot the servers anymore.
Code:
root@kjellern-lima:~# service vsftpd start
vsftpd start/running, process 2552
It says it starts running, but if I try to connect to it, or run:
Code:
root@kjellern-lima:~# netstat -a | grep ftp
nothing happens
View 8 Replies
View Related
Aug 12, 2011
I have some questions:
1) I want when someone trying to access my ftp domain(not from my home network) ,to ask him for username and password.
2) What is the difference between filezilla and vsftpd?They do the same job?(Ok,i added a user with vsftpd and now,what?)(Filezilla works and i can upload files)
3) When someone tries to connect to my domain(outside of my home network) it shows the "It works" page.When i access my domain from my pc it shows me the files i uploaded!How can i fix this???
4) When i try to connect via another pc (in my home) ,it shows the routers interface!
5) Filezilla works with SSH but when i try with FTP or when i use the wizard connection manger it shows the "connection timed out".I use shorewall and in the shorewall/rules i have "HTTP..SSH...FTP".
View 9 Replies
View Related
Apr 2, 2010
I've just installed the vsftpd service on ubuntu 9.10.
in /etc/vsftpd.conf
local_enable=YES
write_enable=YES
and I have restarted the vsftpd with "sudo /etc/init.d/vsftpd restart". I could login with a username but couldn't display any file. Got the following error
View 1 Replies
View Related
Apr 7, 2010
I am currently using vsftpd with ssl support.Currently when the certificate expires I have to generate a new certificate and distribute that new certificate among the clients.Ideally I would like automatic renewal of the certificate and that certificate to then be transferred to the client upon connection.
View 2 Replies
View Related
Jan 24, 2010
I just set up my own server and basically my folder is on say /media/disk1/ and my girlfriends is on /media/patato/ is there a way i can set it so that if i log in it goes to my folder and if she does it goes to hers.... I've currently got it set up as /media/ that it goes to but i cant get it to change it for each user (we can also browse each others drive and we dont want that, we want to be tied into /media/ourdirectory and all of its subdirectories) problem is that it is running on a computer that use to be functional (same install because I cant find my disk drive) so it cant use home folders....
View 1 Replies
View Related
Feb 2, 2010
Hope you can help me out. I'm trying to setup a "drop-box" on ubuntu 9.10 server with vsftpd. I'm able to login and land in the /home/user directory, however I cannot write anything.
View 5 Replies
View Related
Mar 19, 2010
I have installed vsftpd and would like it to be completely accessible to the world, but each time I test connect it propts for username / password. config:
#
# Sample anonymous FTP server configuration
#
[code]....
View 9 Replies
View Related
May 29, 2010
I just made a Ubuntu Server install in a virtual machine and am having trouble setting up FTP to transfer files. I've installed LAMP and vsftp. The web server works great, but FTP gives a connection refused error locally and remotely from the host machine. 'Connection attempt failed with "ECONNREFUSED - Connection refused by server".' nmap localhost doesn't list FTP as open even though I have vsftpd set to listen. I've tried restarting vsftpd with no luck.
View 9 Replies
View Related
Jun 9, 2010
I installed VSFTPD via: sudo gedit /etc/vsftpd.conf
I can start/stop using the following:
sudo /etc/init.d/vsftpd start
sudo /etc/init.d/vsftpd stop
By default, the daemon loads at boot but I don't want/need it to. I executed the following command thinking it would stop it from loading at boot code...
Can anyone tell me how to stop the VSFTPD daemon from loading at boot?
View 2 Replies
View Related
