Ubuntu :: Use The External Drive To Plug Into Any Machine And Run By Just Changing The Needed Bios Mods In That System
Jun 17, 2011
I was just thinking about installing an operating system like ubuntu or ubuntu server on an external harddrive. this being possible , i would like to know if we can use the external drive to plug into any machine and run my ubuntu by just changing the needed bios mods in that system. and without further having to install the necessary hardware specific devices into my os.
Because each machine would have its own hardware set, how would the os handle it or would it have to install the necessary drivers and so on everytime it comes across a different system from the immediate previous hardware it was used with. and i know this was why laptops were invented even maybe to have that portability to use with but this without a laptop, just an external hard drive that can make up and help us use the hardware at hand with ease without any installations of any kind.
View 5 Replies
ADVERTISEMENT
Jul 5, 2011
I'm trying to install tkinter GUI for Python on my machine. I'm working in the Command Line Shell environment exclusively and I'm trying to get the tkinter Modules installed. I'm not exactly sure how to go about doing this, whether it is through YaST or not, but when I search for the package in YaST there are none found. I am VERY new to Linux and OpenSUSE and other than using YaST or zypper to install packages I'm not too clear on the steps involved. I'm not sure how to install the tkinter MODs or any Python MODS
View 3 Replies
View Related
Nov 14, 2010
I plug in my Maxtor 1TB external USB drive, and here's what dmesg says:
Code:
[ 82.480054] usb 3-2: new full speed USB device using ohci_hcd and address 7
[ 82.660052] usb 3-2: device descriptor read/64, error -62
[ 82.950076] usb 3-2: device descriptor read/64, error -62[code]...
lsusb produces no results, and "fdisk -l" yields nothing as well.The drive is not recognised as /dev/sdb1 as it was until yesterday.
View 7 Replies
View Related
May 30, 2010
I'm not sure what to do, but I just rescued photos and documents using ubuntu live cd, gddrescue and photorec. The data carving went fine and I was able to move all of my recovered jpg's into a recovery/jpg folder, as well as my word doc's into a recover/doc folder. I also have recovery/video and recovery/audio. Now here's my problem...
I used the right-click "safely remove drive" from the ubuntu interface and then unplugged my external drive. I then tried to view the recovered photos, etc on my windows 7 desktop, but when I plug in the external drive I get an error and a prompt to "format the drive" so that windows can use it.
I plugged the external drive back into my failed laptop and with the ubuntu live cd can see the drive, but none of the folders display. I can cd "change directories" to all of the folders using a terminal, but still can't see them outside of the terminal. That is, with the ubuntu interface. I'm just trying to finish up recoverying these photos, which I thought I had done.
View 4 Replies
View Related
Nov 28, 2009
formatted a 64g usb memory stick with gparted use fat32 file system and recognized full 64gig drive plug in and is on /media/usb this is what i got on my fstab UUID=24AF-1E67 /media/The-Hive defaults,nosuid,nodev,locale=en_US.UTF-8 0 0 i want all user access to this memory stick to write delete and execute. am I going nuts i cant make it to do that..
View 2 Replies
View Related
Apr 15, 2010
I was installing Linux Debian on a machine and my usb external drive (320 GB) was attached with it (It was on NTFS that time). During installation I deleted all the partitions from machine and from my external drive. Can I recover the data from this drive?
View 3 Replies
View Related
May 1, 2010
I upgraded to Lynx.When I plug in a USB drive, the drive icon no longer appears on my desktop.If I go to Places/Computer it shows up.And once I open it, the icon appears on the desktop.
View 1 Replies
View Related
Mar 4, 2010
I have been using lucky backup to backup my files. However, I am unable to get a list of all packages that are currently installed, turn it into a file, and then back that file up as well with this gui.Lucky-backup's execute function does not work.I would like to have my system backup all appropriate directories upon connection of an external usb drive.I would also like to run a variation of the following command:sudo dpkg --get-selections > /path to external drive/Linux Backup/app-list.log(I need to overwrite the file on every connect- not add to it! What needs to change to this?)1. What commands would I need to use to backup certain directories?2. How can I turn the above mentioned command to OVERWRITE the current file on the drive, and not simply add to it?3. Most importantly, how do I run these commands both immediately upon mounting of the drive, AND/OR "on command" without having to type it all out every time?
View 3 Replies
View Related
Aug 22, 2010
I have a 1.5TB Western Digital Caviar Green in a USB 2.0 external setup with an ext4 file system. I'm going to purchase a 2.0TB Western Digital Caviar Green in a USB 2.0 external case, copy the data over and put my 1.5TB in a fire-resistant box in another house. I'm worried about a couple things however:
(1) I'm worried about the long-term viability of _any_ file system years into the future. I've been storing my data on hard drives (instead of CDs, DVDs or BDs) for years now due to their higher reliability than optical disks. However, the file system used in optical disks is UDF which I think has much longer viability into the future. I'm not going to store terabytes of data on optical discs of course, so I'm wondering what I should choose for a hard drive file system. FAT32 or NTFS (due to Windows' 90%+ presence on the desktop, including still being used by Windows 7) may be the best choice, but I much rather have a open source file system, especially one that allows for permissions, timestamps, etc.
(2) As for my 2TB hard drive that I will be using for a while into the future, should I continue to use ext4 (I've had no problem with it thus far), but is there another file system that has better performance when storing and transferring gigs of data?
View 9 Replies
View Related
Apr 12, 2010
My external disk does not appear as mounted on the desktop (It's e-Sata and NTFS, samsung 1.36 Tera bytes ) There's nothing in /media, nor it appears on the desktop as mounted. What can i do to be able to use it?
[code]...
View 9 Replies
View Related
May 17, 2010
I have an external hard drive that I use to store the My Documents folder from my Windows partition. I want to be able to automatically have all of my saved documents from Ubuntu go there as well. How do I configure that?
View 2 Replies
View Related
Aug 3, 2011
My father installed Kubuntu to his external hard drive to try it out, however, it is running extremely slowly. It takes a good minute and a half to boot to the Plasma desktop and it even seems to run faster off of the LiveCD.His system easily meets the specifications to run Kubuntu (4 gigs of RAM, decent NVIDIA graphics card) yet it slows to a crawl immediately upon booting. Does anyone know how to fix this? The hard drive is a Western Digital MyBook, 475GB model.
View 4 Replies
View Related
Jul 14, 2009
I've never owned an external SATA device, so I'm curious whether these devices are hotpluggable in Fedora. Some computer cases and case inserts have an external SATA connector that plugs into the motherbords built-in SATA connectors and extends the connection so it reaches outside the case. But can you plug and unplug SATA devices just as you do USB devices?
View 8 Replies
View Related
Sep 2, 2011
I have a problem with my hard disk...this HHD had no OS just data in some linux file system....i tired to plug it in a windows OS and backup the files....but now the HHD file systems shows RAW. Now when i plug in fedora 15 OS the HHD is not mountable. I tried to # grub-install /dev/dbc1 but it give me an error. error "Bios driver not found" What can i do to restore my file system so i can recover my data?
View 2 Replies
View Related
Sep 30, 2010
How I can backup all my system & files to external hard drive?
I am using OpenSuse 11.3 32bit - Gnome
View 8 Replies
View Related
May 17, 2011
I've installed Ubuntu 11.04 Natty Narwhal on a External HDD (320GB Samsung S2). Worked like a charm. Bit slow to boot up and load programs, but after a while, works great. I installed it on the external HDD for one purpose: Work anywhere with Ubuntu, no matter which computer I use. I was thinking that was impossible, but I've tested thru several platforms (3 Notebooks, 2 netbooks, all Intel and one AMD Desktop). All worked flawlessly (32 Bits PAE activated and no matter how many cores are active, just works), BUT the themes.For no apparent reason, themes works on the computer I've installed Ubuntu on the HDD. It has his own Internal HDD with Windows 7 and two NTFS partitions.
Themes are stuck to the default boring-white from Gnome. I can only change the window controls. Compiz works, Wireless works, video works, sound works, filesystem works, system works - themes fail. Feels like I've hit my feet's little finger on a chair. P.S.: Ext. HDD is partitioned like this: 300GB FAT32 (it's my pop's HDD, he wants it this way), 18GB EXT4, 2GB Swap.
[Code]...
View 1 Replies
View Related
Mar 11, 2011
Using Linux, I have several backup levels. One of them is a periodical sector by sector copy (using dd) of my laptop harddisk to an external USB disk. Yes, I have other backups too, like remote rsync. This approach (the disk dd) is OK when cloning a HDD with no LVM volumes, since I can plug the external disk anytime and mount the partitions simply mounting /dev/sdb* instead of /dev/sda*. Trivial and handy.
Today I moved ALL my harddisk (including the /boot) to LVM. Everything works fine. I will stress it for a couple of days, and then I will do a sector by sector copy to my external harddisk. Now I have a problem, I guess.
If in the future I plug the external USB HDD to recover any file, the OS will detect a duplicate LVM configuration, with the same name and the same UUID. Even doing a vgrename (which LVM would be renamed, the internal HDD or the external HDD?), the cloned UUID will not change. Is there any command to change name and UUID? Ideally I would clone the HDD and then change the LVM group name and its UUID, but I don't know how to do it. Another related issue would be... In the past I have booted my laptop using the external disk, using the BIOS boot menu and changing GRUB entries manually to boot from /dev/sdb instead of /dev/sda. But now my current GRUB configuration boots directly from a LVM logical volume, something like: set root='(LVM-root)' in my grub.cfg. So... What is going to happen with duplicated volumes?
View 2 Replies
View Related
Dec 24, 2010
everex gPC2 tc2512 they went under
ubuntu 804 hardy
no windows
single boot
my onboard video is going bad.i have a radeon 9250 pci 256mb v/d/vo card.i would like to install before the onboard goes all the way out.how and what all do i need to do.what do i look for and change in the bios.yes it may be the power pack but if not i can not install the video card later
View 9 Replies
View Related
Jan 31, 2010
For anyone reading this I was wondering if there is a way for me to change the dell bios splash screen to another picture, like Tux the penguine or something like that.I've seen alot of people say not to do this due to the editing of the bios and the probability of crashing your system.I was wondering if there was a safe and easy process for doing this???
View 1 Replies
View Related
Feb 9, 2010
i needed to change my external hard drive's file system from ext3 to fat32, to use it in windows, which i did the simple way: i shrunk the ext3 partition, made a fat32 partition, copied the files over, removed the ext3 and made the fat32 bigger. unfortunately, while gparted was making the partition larger, my computer shut down. i lost all my files and the partition messed up immediately. i made a new fat32 partition, after deleting the old one, but noticed that gparted was showing 100 gigs already in use (???). so now i have a 300 gb hard drive with only 200 gb i can use; i ran df to make sure gparted wasn't messing up, but indeed it shows the partition as being only 200 gigs in size. i haven't tried making any other kind of partition yet, such as ext3, for fear of losing my files again, and because it wouldn't be permanent anyway, because i need those files in windows and stupid microsoft won't make their OS ext3 compatible.
View 2 Replies
View Related
Aug 23, 2010
1. When booting standalone (no extra display) everything works just fine
2. After plugging in an external display on VGA slot, the boot process hangs during xdm start
Config:
OpenSuse 11.3
KDE environment
DELL Latitude e6510 with 8G of RAM
Graphic card is DDR3 NVIDIA� NVS 3100M 512 Mo
View 9 Replies
View Related
May 26, 2010
So basically, as rookie as it sounds, I spent about 3 days trying to figure out why my computer wouldn't boot (BIOS not found, then it ran grub rescue) until I saw that my external hard drive (which evidently somehow has some file on) was unplugged. I am running windows and ubuntu 10.4 on partitions on my computer's internal 120gb drive. The problem I have is that during these 3 days, I re-installed ubuntu on the drive from the CD- so I think I have 3 partitions, even though the 3rd does not show up as an option to boot into from startup.
What it does show though, is on my desktop I have 2 mounted drives:
One 52gb one that has my Windows files in it, and one 44gb one that has ubuntu files in it, but NOT the ones I use- this is the rogue copy I installed by "accident". I checked this by looking through the contents and it was all minimal (nothing in home folder).
How do I "remove" this partition safely, and return to having just a windows an ubuntu partition?
View 4 Replies
View Related
Jan 11, 2011
It started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
View 9 Replies
View Related
Feb 24, 2011
I had to change disk order in bios and now I am unable to boot SUSE. My sda is now sdc(disk ID is still the same in fstab). Should I reinstall GRUB to MBR of hd0 or I will need to do something more.
View 2 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
May 12, 2011
i have an Acer Aspire 9420 with gentoo installed and a 2.6.38-r3 kernel.Since a few months i have decided to boot from an USB external HDD WD scorpio Blue 750go (with USB adapter) instead of the internal HDD.Yesterday evening during my gnome session activity i had a black screen with a cursor and nothing can respond anymore. I tried an hard reboot but my bios does not detect my USB Disk either.So i boot from a liveDVD to check what is the problem?
View 4 Replies
View Related
Nov 14, 2010
I recently updated to OpenSUSE 11.3 and now when i plug in my flash drive or my sd card nothing happens. When I was on 11.0 I just plugged in my flash drive and it would show up on my desktop, now I got nothin'. The sd would open up in f-spot but not anymore. I'm not too smart so I'm pretty sure it's something simple that the all powerful geniuses in the linux community can fix. I am running in gnome on an emachines w3609 with intel devices.
View 6 Replies
View Related
Dec 9, 2010
I'm attempting to upgrade the BIOS in an ASUS 1005HA netbook. The netbook runs SuSE 11.3, and no other OS. All the BIOS utilities on from ASUS are Windows or DOS based. ASUS has a utility titled afudos that apparently flashes the programmable ROM. Running afudos using the dosemu utility suggests that one needs to create a DOS boot drive, execute afudos during a reboot with the new ROM image located on the drive.
How does one accomplish said task on a netbook without a floppy disc drive? Do I create a bootable DOS USB flash drive that contains just afudos and the new bios flash rom upgrade? And if so, how does one do this? As a side issue, it looks like all the major motherboard vendors do not support Linux. That is, all the motherboard drivers require Windows or DOS.
View 7 Replies
View Related
Jul 1, 2011
I recently obtained a built machine that has an Intel motherboard. The computer had Windows XP on it, but the owner wanted me to format it completely before I started using it. Nbd, I just used a gparted live cd and formatted the 200gb Seagate it came with.
Well now, I think the drive is dead or something, because whatever machine I put it in, it doesn't boot.
So, being out the 200gb drive I was hoping to use, I just threw in a spare drive I had laying around. (This is isn't the point of this thread.)I planned to use the machine as a basic server, so I made a Debian install CD and just let the installer run (completing the appropriate prompts). However, usually towards the end of the installation, the machine completely kills itself. It just randomly shuts off. No message about it, just, "Click!" and the machine's dead. I know the installation doesn't complete, I've used the CD on other machines, and Debian will tell you that it's finished and getting your consent before turning off.
Upon trying to reboot the machine, after a few seconds of POST messages, it kills itself again. And again. What I've figured out is pressing the reset button a few times during boot usually gets to go eventually. I swapped the power supply out, but that didn't make a difference. I've tried different RAM. I swapped out the CMOS battery. Nothing seems to be working.. As of right now, it does not kill itself, but it will turn on and immediately it hangs on a a screen that says Nvidia Vanta VGA BIOS and some other video card info. After it started doing this is when I changed the CMOS battery.
The board is older, an Intel D845BG. The first power supply was 300w, as was the second. I also tried a 250w one with no results. The standby light on the motherboard does go on as soon as it gets power. I tried a different video card, just as a "why not?", and the machine still didn't boot, however that first POST line changed to 3D Prophet II, etc. or the name of the video and it reflected the change in video memory.
View 9 Replies
View Related
Oct 30, 2010
Got an old SUSE box from a friend, installed 11.3, got a few items: 1. didn't see any prompts to enter monitor info during install, control center shows as generic. Read about 'sax2' (hope that's right) but can't find it on my system or in the add-ons image. Do I need to hack monitor.conf? how? 2. installation aborted when trying to load 'textlive'.3. going into control center->mouse, the display quivers a little then I get kicked back out to the login prompt. 4. how to get kaffeine to process flv files? 5. how to get a flash drive to automount when I plug it in? I can manually mount ok. I guess that's about all for now.
View 2 Replies
View Related
