I have a Dell 500 laptop and it doesnt have WiFi and earlier when I used Windows, I bought a Belkin Enchanced Wireless USB Adapter to enable to connect to my home WiFi station and it worked perfectly.And then I instaled Ubuntu and when tried to instal Belkin I saw that it is Windows only!how to make it work on Ubuntu, cause I really like it but I can't "live" without WiFi.
View 9 RepliesI have a compaq presario. I cannot connect my wifi. The indicator won't light up and I just get an error message sayin network is down on interface pppo. There seems to be some abswers out ther, but they are more advanced than I am.
View 12 Replies View Relatedrecently installed ubuntu 9.10 on my HP pavalion DV4 laptop all the things are working fine except wireless connection. I am unable to connect to the wifi network.
View 4 Replies View RelatedI have a Dell Mini 10v with a fresh install of latest Ubuntu Netbook Edition. I have enabled proprietary drivers in order to get the WiFi card to work and managed to connect at home, starbucks etc. Good stuff.
For some reason I can detect but not connect to the WiFi at work - I get prompted for the pword and after entering it the WiFi indicater will pulse for a while only to return to the pword prompt. yes, I have the right pword and can connect my iPhone and other laptops. I am really puzzled by this and really need to get on the WiFi at work - wired connection works.
my colleague has the same dell model with windows 7 installed and is able to connect fine - I really don't want that @@@@ installed just to get WiFi. I know password entry error is the obvious solution but I connect new windows devices to it routinely and had other people try too.
I tried to implement the solution given at: [URL] on a Dell Inspiron 1525 laptop, running Ubuntu 11.04. However, I still can't connect to wifi.
I can see that the files were extracted inside /lib/firmware/ (I see a b43 and a b43 legacy folder).
The lspci -vnn | grep 14e4 returns:
Code:
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
I am running Ubuntu 10.10 Netbook Remix on a Toshiba Netbook NB300. After performing an upgrade I find myself unable to connect to my wirless network and have lost the wifi icon in the task bar. Ethernet connectivity is however working.
iwconfig shows:
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
ifconfig shows
[Code]...
I need to take to bring back wireless connectivity to my netbook and restore the wifi icon to the task bar.
I have a Dell 1505E with Debian 3.16.7 which is unable to connect to channels 12 and 13 even after changing wifi regional settings to different countries (using iw reg set).12 and 13 are legal to use in the UK. What should I do?
Code: Select allsudo lspci | grep -i wireless
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Code: Select alllspci -vv -s 02:00.0
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Subsystem: AzureWave Device 2047
[code]....
i'm using redhat enterprise version, i'm facinh problem in wifi. i able to browse internet via ethernet but unable 2 connect via wifi and how to install applications.
View 2 Replies View RelatedI have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies View RelatedI can not connect to wifi networks, i can see them but not connect.
My wifi device is:
I tried to install vsftpd on my server and while the installation went fine, I can't run
Code:
restart vsftpd
As I the get error
Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
My ubuntu won't connect to my WiFi. I've tried to read others stuff about people having this issue but it didn't make that much sense to me so could you maybe dumb down the computer language a tad? I don't know if I should or not as well but, I want to wait to install ubuntu till I have WiFi so I can update it while I install it, is that a good idea? But my computer is a HP Pavilion g6 if that matters.
View 3 Replies View RelatedI am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View RelatedI am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
I have been experiencing slight problems while attempting to connect to the internet via a wireless router. I can connect to my router perfectly fine on Vista and I could connect to my friends router while I was in Ubuntu, but I can't connect to my router while on Ubuntu. I've been entering the same code that will work when I'm in Vista, but it wont work while in Ubuntu.
View 7 Replies View Relatedi just have to say that i have no idea what im doing. A friend of mine put ubuntu on my dell mini and i cannot for the life of me figure out how to make it connect to my wireless internet at my house.
View 2 Replies View RelatedI have an old laptop that has bcm4306 (rev 3). I have used it to install several iterations of Ubuntu in past year or so, and the wifi worked just fine for Intrepid and Kermic, using b43-fwcutter.However, when I installed Lucid from scratch, I can't get the wife to work.It says it was installed properly, but I can't see any network around.
View 2 Replies View RelatedI just installed Ubuntu 10.04 in my laptop and I can't connect to WIFI. When I boot with Windows 7, the connection is fine. I think the problem is with the drivers so I decided to boot on Windows 7 and look for the driver for Ubuntu. Problem is, I do not know what driver do I download. Here's an image of my Device Manager in Windows 7.
View 7 Replies View RelatedHaving played around with ubuntu a fair bit I decided to breathe life into an old thinkpad with a pcmcia wireless card, by following the minimal install instructions and using lxde window manager etc.. Everything works fine apart from the fact that I cannot connect wirelessly. The card picks up and lists connections but whenever I have clicked on a connection the dail spins and then it gives up.I installed network-manager and managed to get nm-applet appearing in the sysTray otherwise I would not even have known there was wireless connections there.
I was thinking there maybe some conflict with another network manager, does this sound likely?
Okay, I know there's been plenty of issues with this (and the erractic pad, but I'll figure that one out later)...but I seriously cannot for the life of me figure this out.
I'm new to Linux and Ubuntu, so please be gentle! I downloaded Unbuntu a few nights ago and everything's fine except for not being able to connect to wifi. Now, I understand that I have to connect using an ethernet to fix the issue, but when I do (even after restarting my netbook and restarting my wifi), it STILL won't connect to the internet to download what I need to fix my wifi.
I'm leaving for Prague tomorrow and really only have tonight to really get this down. I have a mini mouse for now so all I need to focus on is this internet fail. If you're willing to walk me through it step by step (remember, I don't know coding or much indepth programing).
I'm having an issue recently with Ubuntu 10.04 x64. Connecting to my wifi is not working. I believe it is some kind of issue with the router. On Windows 7 the only way that I could connect to the net was by copying the network profile to a usb flashdrive from another computer and loading it mine. The wireless signal just keeps attempting to connect.
View 1 Replies View RelatedI'm a long-time Ubuntu user, and setting up my connection was as easy as putting in my WEP key, and that was it!
I installed Kubuntu 11.04, and it's really difficult. I located my wireless network, and after putting in my WEP key, it just says " Setting Network Address", while prompting me to re-enter my WEP/Hex key. After repeatedly entering the password, I get a red circle/slash icon in lieu of the network icon.
I have Ubuntu 10.04 on my EeePC 1000H. I don't use this computer often but it has always worked before... I suspect an update did this to me. I've recently swapped wireless routers but all my other machines have been able to connect to the new router. I can see the SSID and the signal strength is high but when I try to connect to it, it just attempts for a long time then asks me for my password again. I am currently connected to wired network.
Code:
michael@michaelsEeeUbuntu:~$ nm-tool
NetworkManager Tool
State: connected .....
pan0 Interface doesn't support scanning.
I installed Ubuntu 11.04 yesterday and my wireless didn't work so I searched a little and found a way to make it work; Uninstalled bcmwl-kernel-source and installed firmware-b43-lpphy-installer and b43-fwcutter. And it worked. But today I accidentally pressed the "turn off wireless" button on my laptop. I obviously pressed it again and thought it would work but it doesn't. Now I find networks and stuff but I can't connect to them. It tries for awhile and then asks me to enter the password which I do (it is correct) and then it tries to connect for a few minutes again and then it asks me for the password again.
Some info:
Code:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
[Code].....
I'm having a problem to connect to the network at home via wifi, open or protected. Using ubuntu 11.04, attached are more details. I've managed to get a successful connection on an open network at work.
View 7 Replies View RelatedI need to know what is BSSID.. I want to connet it but I have problems with this...? Where I should to find that code..? or what is it...?
View 3 Replies View Relatedis it possible to connect to my internet router from the console? for some reasone my gnome envirment removed and i want to install it again.
View 5 Replies View RelatedI can connect to my home WiFi connection with no trouble at all.
I can't connect to a free public WiFi (like at a library).
i am tryin to connect to internet through wifi. for this i have to connect to router first and then open the web browser to put UN and PW. I am using ubuntu. i know UN and PW. I can connect to router but my(any) web browser cannot open the authentication page.
View 3 Replies View Related