Ubuntu :: Unable To Boot /home Is Not Ready
Aug 20, 2011
after my recent update in ubuntu 11.04 64bit that installed a new kernel, my first boot into the os stalled for a long while. i think it said it was checking the disk but did not show any signs that it is working. i left it for half an hour or so and had to force restart it.
from then on, my ubuntu gives a black screen when i boot. choosing recovery mode it tells me it cannot find /home saying /home is either not ready or not there.
i tried to do a fsck and it says fsck.ext4 Unable to resolve UUID=e8629....not impt. probably the /home partition that is messed up. i used gparted to look at my partition and true enough my /home partition is now an unallocated partition space.
this is my setup. i have a win 7 ubuntu dual boot
Device Boot Start End Blocks Id System
/dev/sda1 1 1913 15360000 27 Unknown
/dev/sda2 * 1913 1926 102400 7 HPFS/NTFS
/dev/sda3 1926 71017 554980469 7 HPFS/NTFS
[Code]....
View 3 Replies
ADVERTISEMENT
May 16, 2011
Okay, so I found a couple articles about the new BTRFS for Ubuntu that became available on 10.10, and I was wondering if some people could clear some stuff up for me. I am going to be upgrading my desktop box from 8.04 soon (I know,long time coming, but I had some hardware compatibility issues with recent releases that have been addressed on my end) I'm pretty new to a lot of these terms, so a detailed explanation would be awesome if you don't mind.
1 - Is this file system ready for the home user?
2 - Are there significant performance gains over ext4 and is it stable? If not now, will it be in the future?
3 - When a new subvolume is created, does that act like a partition? For instance, would a home folder in it's own subvolume act like home on a separate partition in the event of a reinstall or upgrade to the root filesystem? If not, what would be the specific advantages to using a subvolume?
4 - When creating a snapshot, is it bit for bit or a compressed image?
5 - Does compressing the root filesystem save a significant amount of disc space?
6 - Is there anything else that would be important to know about this filesystem?
If I have some things confused or misunderstood, it is because I am just starting to understand how some of the foundational stuff in my OS works
View 5 Replies
View Related
Jan 30, 2011
I've been seeing issues with this for the last few months when getting kernel updates. Never on every reboot, but this last time has been somewhat stubborn. Usually I can go back to the previous kernel, boot, reboot and I'm good. But not this time.My fstab:
Code:
# /etc/fstab: static file system information.
#
[code]....
View 3 Replies
View Related
Oct 15, 2010
On rebooting or initial start up intermittent problem:"The disk drive for /home is ready yet or not present." It seems to happen on a cold startup and if a change is made in init/default file. (addition of the numlockx package modifcation.) So far a second or third restart will find the directory and complete the start-up.
On a 120 gig hard drive I have these partitions:
4 gig swap
25 gig /
90+ gig (the remaining space) /home
View 1 Replies
View Related
Jun 17, 2011
I tried to implement the solution given at: [URL] on a Dell Inspiron 1525 laptop, running Ubuntu 11.04. However, I still can't connect to wifi.
I can see that the files were extracted inside /lib/firmware/ (I see a b43 and a b43 legacy folder).
The lspci -vnn | grep 14e4 returns:
Code:
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
View 9 Replies
View Related
Oct 10, 2010
Everytime I to turn on my wireless device, and try to connect to a wireless network, i see the phrase " device not ready" greyed out, and not able to access a wireless network. i do not know what to do
View 6 Replies
View Related
Jun 5, 2011
Due to complications, the laptop running Ubuntu had a hard reset during the 11.04 update. Now when I try to turn on the machine, I'm met with: "The disc drive for / is not ready yet or not present Continue to wait; or Press S to skip mounting or M for manual recovery" Anyone with a similar experience or the technical knowledge able to help with this?
View 1 Replies
View Related
Apr 20, 2010
First off, I should state that I am still using Hardy. I realize that it is many versions from the current release, but my schedule is full and provides little time to ring out a new distro and considering the nature of my problem I don't see much need.
The problem is that I cannot connect to my WPA home network. The wireless card is working because I can connect to any WEP network and before upgrading to Hardy I could connect, although not at first.
Have recently installed WICD which has not helped. WICD tries to connect but reports that it cannot obtain and IP address. Network Manager did not report anything but did seem to translate the password into an encrypted key (saw posts relating to this before but no obvious fix) Since switching to WICD I have not had the opportunity to test connection to a WEP network.
I do not wish to change the security of my home network to accommodate the operating system.
View 3 Replies
View Related
Jun 21, 2010
IWithout having made any configuration changes (that I am conscious of), for the past few days I have been unable to connect to my home network - and hence to the internet.My 64-bit Kubuntu (10.4) is on a dual boot machine.If I boot XP then things work as they have done for the past year or so - no network connection problems at all. So I know it's not hardware, LAN or router/cable-modem related. In addition none of the other systems on the network have a problem.
I tried to check if there are some firewall settings that might have changed - but cannot seem to find anything about the firewall in my Kubuntu set-up. Indeed I cannot figure out how to do any problem source identification.
View 1 Replies
View Related
Nov 16, 2010
I am trying to run a script in another partition of the hdd the file name is new I ran
Code:
chmod +x new
both as normal and as sudo but still get this error....
Code:
-bash: ./new: Permission denied
View 5 Replies
View Related
Dec 28, 2010
Ubuntu 10.10 32 bit/ and /storage are on two different partitions. I want to move my home directory to the /storage partition, so I went to System -> Administration -> Users and Groups then Advanced Settings then the Advanced tab. I changed Home Directory from /home/billy to /storage/home/billy. I click on ok and I'm asked if I want to copy all the user's files over to the new location or start fresh. I click, Copy Files. It acts like it's doing something, but all it does is create the home/billy directories inside /storage, but it never copies files over and the next time I go to /home/billy it's still in the old location. What the heck is the deal?
View 7 Replies
View Related
Jan 29, 2011
I just got a used machine with ubuntu on it, and can't seem to change the name of 'Home.'
View 7 Replies
View Related
Dec 12, 2010
I Decrypted home directory and still unable to see data.
View 9 Replies
View Related
Jun 27, 2011
kernal 2.6.38-8 After updating Kubuntu-the log in screen will not progess to the desktop. It freezes and then shows the message "no write access to the home directory.." Goggling the problem - references to an .ICEauthority in my home directory are mentioned as linked to this problem. However "ls -la /home/charles" reveals that there is no .ICEauthority file present.
View 6 Replies
View Related
Nov 8, 2010
I just recently bought a second hand netbook (HP Mini Mi 110) from ebay which use linux ubuntu as OS. I changed the previous username to mine but when i tried to login again...this warning pop out "your home directory is listed as: '/home/mazlin' but it does not appear to exist. Do you want to log in with the /(root) directory as you home directory? It is unlikely anything will work unless you use a failsafe session" so i click yes. then...
user's $HOME/.drmc file is being ignored. This prevents the default session and language from being saved. File should be owned by user and have 644 permissions. user's $HOME directory must be owned by user and not writable by other users. next i click OK, then... your session only lasted less than 10 seconds. if you have not logged out yourself, this could mean that there is some installation problem or that you may be out of diskspace. try logging in with one of the failsafe sessions to see if you can fix this problem. when i click ok, the login screen reappear again... how to use failsafe sessions.
View 7 Replies
View Related
Jan 19, 2011
I just installed WUBI and tried to connect to my home router but am unable to. I can connect to nearby unlocked routers, but am unable to connect to mine which is WPA-PSK [TKIP]. Also, this is the first time I've even seen Ubuntu
View 4 Replies
View Related
Mar 10, 2011
Yesterday did a fresh install of UNR 10.10, all went well with that. After the first log in it found the Wifi and checked for updates. Updated the system and then it went to restart the system due to a Kernel upgrade. Once I did this, that is when the issues started. Firstly when booting up, it just sat at the Ubuntu boot up screen saying:
"The disk drive for /home is not ready yet or not present"
'Continue to wait; or Press S to skip mounting or M for manual recovery'
So firstly I hit S, this presented me with several error boxes (as expected due to setup/config files sitting in my /home folder), I then found that I wasn't able to connect to my wifi (not that it can't see it, just that it won't connect) each time I try and connect it just comes up saying that the wifi is disconnected. Of all the things to fail I was expecting the Bluetooth to and it didn't. Anyway the computer specs are: MSI Wind U100, upgraded to 2 Gig Ram, 320Gig HDD, and wifi card is the Realtek RTL8187SE.
HDD is setup as:
4Gig for Swap (/dev/sdb1)
6Gig for / (/dev/sdb5)
Remainder is /home (/dev/sdb6) (I did make this an encrypted partition)
Can't do any screen shots as I am not able to connect to the internet on that machine (having to use another computer in the house). I have tried to view the fstab file and I am not able to.
View 6 Replies
View Related
Jun 11, 2011
I got 11.04 installed on my laptop a few weeks ago and all seemed well. I've only used this machine for general surfing and downloads (legal of course )Anyway, last night it started to display some odd or should I say, show stopping issues.
Issue 1. Clicking the Home Folder button at the top of the left launcher does nothing. Well when I say nothing is does dim the icon, the hard drive turns but no folder opens. OS function 101 failure.
Issue 2. Inserting a USB stick (that just last week we working fine) does nothing. Again, when I say nothing, the harddrive light goes on, but the USB drive does not open.
Issue 3. Unable to get my home folder open in the Ubuntu 11.04 Unity system I downloaded Sunflower, a file browser app. It runs fine from the command line, but when the I decided to make a shortcut to this on the desktop, I right clicked on the desktop in order to use the Create Launcher option. But guess what? The right click does not reveal any menu. Right clicking on the desktop does nothing.
This is not good enough for what is suppose to be a mature stable OS!I really do not want to go to Fedora 15 or <shudder> Windows 7 so, how do I fix this broken system? Is there some system repair that reinstalls the OS or something? Is there a system repair that does not require me getting all the updates again?
View 9 Replies
View Related
Aug 15, 2011
I can't access any of the sub-folders or files in my home folder on Ubuntu. I've checked the folder associations, that doesn't seem to be the issue. I've also opened the mimeapps.list file and the inode/directory association seems fine - inode/directory=nautilus-folder-handler.desktop;
I'm running Intrepid (8.10) (please don't ask me to upgrade! ) and the issue started after using Qtpfsgui 1.9.3 a couple of time to create HDR images. I guess Qtpfsgui broke an association somewhere, but where? I can access other folders, on Computer and Filesystem, but not on my home folder.
View 1 Replies
View Related
Feb 4, 2010
I'm running Slackware 13. Apache has been configured and running. That is to say, I can access the server pages on my machine locally using the current DHCP IP address.
However I'm unable to access it from outside (say from a friends's house) using the same DHCP IP address. I read on the internet somewhere that some DSL providers disable port 80 to prevent individuals from hosting. I don't know if that's the case but I did try specifying different ports in httpd.conf and added the port number to the IP address URL but still didn't work.
Code:
I saw some LQ threads which said that the problem could be in the firewall. I don't think I have a firewall but I'm not sure. How do I know that?
I'm just trying some stuff without much concern for security at this point. I understand that a DHCP address can change but for now I don't mind entering the IP address explicitly.
View 14 Replies
View Related
Jun 20, 2011
I am getting the following error. But when I checked under what login I am, it gives me my name. I checked /home directory and /export/home/ but I do not have a folder with my username.
Using keyboard-interactive authentication.
Password:
Last login: Fri Jun 17 18:13:54 2011 from 192.168.120.38
Could not chdir to home directory /export/home/abhinav: No such file or directory
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
testing-01: /$ whoami
abhinav
testing-01: /$
View 8 Replies
View Related
Sep 7, 2010
I have a Dell Mini 10v with a fresh install of latest Ubuntu Netbook Edition. I have enabled proprietary drivers in order to get the WiFi card to work and managed to connect at home, starbucks etc. Good stuff.
For some reason I can detect but not connect to the WiFi at work - I get prompted for the pword and after entering it the WiFi indicater will pulse for a while only to return to the pword prompt. yes, I have the right pword and can connect my iPhone and other laptops. I am really puzzled by this and really need to get on the WiFi at work - wired connection works.
my colleague has the same dell model with windows 7 installed and is able to connect fine - I really don't want that @@@@ installed just to get WiFi. I know password entry error is the obvious solution but I connect new windows devices to it routinely and had other people try too.
View 1 Replies
View Related
Oct 24, 2010
After update i cant log into my login account. I cant go into home/mylogin directory.
Unable to read ICE authority file /home/mylogin/.ICEauthority
View 2 Replies
View Related
Jan 30, 2011
After buying an IBM/Lenovo USB fingerprint reader model FP06 and installing Fingerprint GUI, have problems to mount my home folder encrypted with eCyptfs. I was using it since the first time i install Ubuntu 10.10 64 bits. After login from GDM, there are some ways to make it work:
1) open a terminal window and type ecryptfs-mount-private. This decrypt the home folder, but need to logout and login again to my personal preferences can be reached (bookmarks in nautilus, in firefox, etc). Each time the PC is rebooted, the same process is needed to made again.
2) before login in GDM, change to a tty1 terminal (ctrl-alt-F1) and login from here. The personal folder decrypt then without problems. Then change to GDM (ctrl-alt-F, login an everything works fine. What could be the fault from GDM to not mount the encrypted folder?
View 8 Replies
View Related
Jun 12, 2010
I switch on the PC and it loads the Grub splash screen. However, it does not automatically boot the top entry after two seconds as it's supposed to and just hangs. I hit enter to boot it and it attempts to but after a few seconds gives me the error "unable to mount file system....a maintenance shell will be started"
This occurred after I was using it and then everything suddenly froze up on me and I had to crash out Now this!
View 6 Replies
View Related
Oct 8, 2009
I can't access my home folder using nautilus ( and everything that using gui), but I easily can access to subfolders e.g. "Music", "Downloads" and others. What can cause this trouble?
Also I can retrieve directory listing using terminal.
View 14 Replies
View Related
Jun 17, 2011
Am new, as of today to Fedora. I am unable to connect to my home wireless network. I have checked the security settings WPA PSK Personal TKIS, on the router. I have two windows PCs that are connected in this way.
The error message in Fedora 15 Network is Authentication required by wireless network. The details I have entered are correct, but no joy. Again, I am entirely new to Fedora
View 1 Replies
View Related
Sep 3, 2009
I just moved into a new apartment and now connect via DHCP. Everything seems fine network-wise, except that when I'm at work I can't connect to the home box. (CentOS 5.3 x86_64) One thing I noticed is that I can't really determine my "true" IP address. What I mean is that it looks like my IP is 192.168.0.190, but when I use linuxdcpp, and enter a hub, I'm told my IP addr is actually something like 71.192.163.206. Here's some info:
[root@localhost cwatson]$ cat /var/lib/dhclient/dhclient-eth0.leases
option dhcp-server-identifier 192.168.0.1;
option domain-name-servers 192.168.0.1;
option broadcast-address 192.168.0.255;
[Code]...
View 4 Replies
View Related
Jun 13, 2010
Accidently ran rm -rf while the pwd was /home/user-name
Now I'm unable to run any command whatsoever as root, ls,vi,cnf whatever, they don't work.
However the commands work as normal user.
I can guess that the files with root ownership in the home folder were deleted but I would like to revert everything back to normal and would like to know how to solve this problem.
View 5 Replies
View Related
Jan 18, 2011
I have setup a home based web server to host a photo blog for myself and my friends. I will be running wordpress and possibly a phpbb3 forum. I'd like to open this to discuss server administration, server setup, and server maintenance. However, I have a pretty good start on all of those but serving a domain name to my static ip. Here my static ip is 24.10.202.144. I registered a domain through [URL]... It appears that I have the domain working to forward to my ip. However, I am still getting this output file from apache.
[code]...
I have tested the domain name across a few different computers on different ips. It works appropriately. I just want to make sure I have it set correctly on the (apache) server side of things. Then I can get more into Zone Editing etc.
View 9 Replies
View Related
