Is there a way to stop conky from closing when I click on it? I have a few set up as a system monitor bar on the desktop, and I'd like to anchor them there from accidental clicking so I don't have to restart my script.
View 2 Replies
I'm new to Conky, and have shamelessly copied from the many other conkyrc files posted here! I have Conky set to start up with a 15 second delay, and it does. But frequently when I close another programme (eg Firefox) Conky disappears. It's still running, and if I log out or reboot I see it for a flash, and it appears OK again when the system starts up.
System info:
Ubuntu 10.04
Kernel 2.6.32-24 generic
Gnome 2.30.2
[Code]...
Boot of a new minimal system hangs on "Stopping save kernel messages" or "stopping system v runlevel compatibility". I have ubuntu minimal iso x86_64 from usb stick created with unetbootin (don't have a cd drive on the machine in question), and after that I didsudo aptitude install gnome-terminal network-manager-gnome gdm geditsudo rebootnever got a system back. Annoyingly I can't boot into the recovery mode either, and it seems the keyboard is only semi-responsive (i.e. many dead keys when at the grub menu).qualms about reinstalling, but I've done this a few times and ended up at the same place every time.
View 6 Replies View RelatedI have conky installed and set up as a startup application, however everytime I log out and back in conky creates itself as a new window:
How can I get conky to start normally without having to do a manual restart everytime I login?
In December I finally filled up my root partition and broke Suse 11.1. I therefore resized my partitions and installed Suse 11.3 on /root. I didn't not touch my /home partition.
I notice that when I leave my machine and come back the screen has locked. I have tried to turn off the screensaver, but it hasn't worked. I have Googled, but unfortunately the screen shots don't look like what I have and the instructions to stop this do not seem to match what I am seeing on the screen.
Is there a way to do this via the command line?
Said that all the config i find put all the info in one place of the screen, in this example on the right side:
url
or like conky colors where you can put in either side, or other complex examples that use folders with images..that at least i need one day to study all the variables it has...
What i want is something simple, in my black background i dont want images and effects, only white simple text.
My problem is: i want for instance my specs above, my log info in the middle, my music info bellow (above my clock) and in conky config i'm hitting my head in the wall....
For instance if i use my facebook script to appear in the midle how the hell can i put my music info bellow without ruined the facebook in the midle...do i need 2 conky configs?
when I type "conky" in terminal it returns with Conky: invalid configuration file '/home/user/.conkyrc' Conky: missing text block in configuration; exiting ***** Imlib2 Developer Warning ***** : This program is calling the Imlib call: imlib_context_free(); With the parameter: context being NULL. Please fix your program. I've tried completely uninstalling, rebooting, then reinstalling, still same error?
View 3 Replies View RelatedI have a problem with conky. It draws a black background instead of using pseudo-transparency. I ofc tried to achieve this with feh but to no avail. All the instructions here failed: Conky Hardcore! Conky transparency with KDE (3 and 4)
[Code]...
I have a problem with my non-powered external UBS HDD.
When i right click it and choose "Remove safely", it vanishes from nautilus and the Places menu, but it continues to have the lights on and spin. I am wondering if it is really safe to remove my hard drives like that or if it is an issue.
Ok so I just installed Ubuntu server 9.10. It started out as cmd line only, I ended up installing ubuntu-desktop package from apt ran startx, and from that point on when ever I start the server I get the gui login screen instead of the original cmd line prompt. Now Ive been surfing around the net trying to figure out how to get it back to the original cmd prompt login screen, I really want to use startx when i need a gui.. the main reason I installed this package is really for all the libraries that it contains as i will use a few programs (firestarter, powertweak etc) that use a gui and I figured to make my life simpler i would just install the entire gnome desktop package so i will have everything i need when i try to run these misc programs (most of them will be run thru x11 forwarding as this server will only have internet and power plugged into it) Ive tried disabling gdm startup Ive even removed the /etc/init.d/gdm file all together and it still starts X (i moved it to /usr really but it should(?) work the same as deleting it). there is no other desktop manager to my knowledge (kdm etc).
Ive tried rcconf it says gdm is disabled (i tried disabling it before removing gdm from init.d and nothing), I went thru trying to disable anything that has to do with xserver so far I have only found x11-common I dont think it starts up x but i disabled it anyway. Ive also tried "update-rc.d -f gdm remove" that doesn't do anything either seems no matter what i try i cant stop the gui login screen from popping up.How do i get it to start with the original cmd prompt login?? i am considering reinstalling to get it back but i will lose all my work and that will defeat the purpose
I installed Ubuntu 10.04.1 yesterday, and I've been trying to install my nvidia 240 drivers for it. I've done this multiple times on 9.## and it worked fine. When I try to install them it says i need to shutdown xserver. so I open terminal and type sudo /etc/init.d/gdm stop screen goes blank and all there is is a flashing _ at the beginning. I'm not able to anything except type, but no commands work.
So, I tried starting it up in recovery mode root shell or whatever, and it shows the command prompt. Then I login, and it says welcome, I go to my downloads folder and type sudo sh NVIDIA...256.44.run and it says I need to be in telinit 3, so I get out of the installation and type sudo telinit 3.well that brings me up to a login command so I type my username then it askes for a password, which I also fill in.Now it says incorrect login. So I try again, and it keeps going on, but then I noticed that it puts the first letter of my username infront of Password.And the only way I can get out of that is by Alt + Ctrl + Del to restart, same when I shutdown gdm.
Code:
sudo /etc/init.d/gdm stop
This code isnt working. I get "command not found." Does anybody know the correct code?
I've got a laptop with a touchpad. When my cursor is in a text box (ie: this one or abiword or email) and I touch my touchpad with two fingers it automatically pastes whatever is on the "clipboard." How can I make it so when I touch my touchpad with two fingers it does NOT paste any text?
View 1 Replies View RelatedI've got a bit of an intermittent issue with my audio in Ubuntu, which i run into when i'm listening to podcasts. As i'm listening to podcasts in google reader, it will suddenly stop playing. After this happens, nothing in reader will play anymore, and things from ..... will play only video, no audio.
While this is happening, I can play a pod cast in totem movie player in mp3 format. This'll work fine for a while, but eventually the audio will stop, forcing me to push play and then look through the pod cast looking for where it was when it was stopped.
It's pretty annoying having to reboot 2 or 3 times a day to get my sound working in firefox. I have to reopen all my applications and projects every time.
Also, I noticed this line in my /var/log/messages file.
Mar 30 17:10:06 jimbo-desktop pulseaudio[1781]: alsa-mixer.c: Your kernel driver is broken: it reports a volume range from 6.00 dB to 6.00 dB which makes no sense.
I'm just not too sure with the linux audio systems.
how do I stop my Kubuntu to set up an IP ? I tried this:
sudo ifconfig eth0 192.168.0.1
but in the following minutes it changes it!how do I stop it?
how do i make it so that all the desktop icons in my xubuntu session are freely movable? right now they are snapping into pre-determined positions (does that make sense?)...
View 2 Replies View RelatedI have a fresh install of ubuntu 10.04 lucid .... When I went to download some files via firefox, I noticed that the downloads would stop before the download is complete. I tried to download a small 8MB file and it reached almost 4MB then the download simply stopped and firefox incorrectly informed me that the download was finished.. I tried several more downloads after that of various other files and the same thing happens. I have never had trouble downloading files before. I upgraded to firefox 3.6.13 before I noticed this problem so I do not know if it was doing it before I upgraded as this is a fresh ubuntu install.
View 2 Replies View RelatedI've just installed gNatty 11.04 on my machine the first thing I've done is to update via the terminal:Quote:sudo apt-get update && sudo apt-get upgradeAll seemed fine but when I've gone to restart it gets stuck at this message while booting:Quote:Stopping System V runlevel compatibility've reinstalled but the problem is still occurring,
View 5 Replies View RelatedUbuntu 9.10 64bit
CPU - amd phenom II X4 955
I tried to stop kvm and kvm-amd modules to run at boot by adding; Code: blacklist kvm
blacklist kvm-amd at the end of /etc/modprobe.d/blacklist and reboot PC. However it doesn't work.
$ ls /etc/modprobe.d/ Code: alsa-base.conf blacklist-firewire.conf blacklist-oss.conf
blacklist-ath_pci.conf blacklist-framebuffer.conf blacklist-watchdog.conf
blacklist.conf blacklist-modem.conf libpisock9.conf
I've been tweaking my kernel for RT performance over the past few days, and just recently, it's begun randomly cutting sound playback, and I can't seem to figure out why.
Was watching a movie last night using VLC, and about 5 minutes in, sound playback just totally stopped while video kept working. Sound driver in VLC was set to Pulseaudio. I switched it to ALSA and the problem seemed fixed.
In Decibel Audio Player, the tracks randomly just stop in the middle of a song occasionally (every 5 songs or so, give or take), and a little red 'X' appears next to the track that got "skipped." Screenshot:
[URL]
Don't recall it happening before I tweaked all the RT audio settings.
When building 8.04 servers, I reconfigure snmpd's logging options to prevent copious low priority messages being logged whenever our network management workstation polls them. I edit /etc/default/snmpd and change line 11 from:
Code:
SNMPDOPTS='-Lsd -Lf /dev/null ...'
to:
[code]....
Title is pretty much the best description i can give. I have a second computer that i'm trying to put ubuntu on except i just can't boot into it. I've tried multiple ways be it from usb, from cd/dvd, installing it through wubi and reinstalling... Every single time a get some error due to speech dispatcher not being enabled and that is causing it to get stuck at the splash screen...
View 1 Replies View RelatedI had Ubuntu 10 do this same thing for me. I'm using Natty now, and it worked fine until a few days ago, then out of nowhere it does this. I'm listening to a song and it plays all the way through, but when its done it doesnt play the next song. I can select a new song but when I do, it freezes. i'm using an HPG71 if that helps.
View 2 Replies View RelatedI was facing trouble getting my second monitor to even get detected (GeForce GTX 260) so out of desperation i apt-get'd nvidia-glx-179 drivers, I then used Jockey to enable that driver.
Since then, whenever Ubuntu tries to boot, it kills itself. And this is the process:
I power up the tower, the screen goes that nice brown shade as I wait for the graphical ubuntu logo to show me its loading, when it eventually does it very quickly cuts into a full screen not-really-interactive terminal window that shows the boot hanging at random spots in the boot process. Theres no clear pattern. At the time of writing, it hangs on "setting sensors limits" after "Starting AppArmor Profiles".
Im going to restart again, This time it hung up at "Checking battery state..." im going to restart again, Hung up at "PulseAudio configured for per-user sessions saned disabled; edit /etc/default/saned" Ill restart again, Hung up at "Stopping userspace bootsplash"
As much fun as this is, I have a website to develop and this is seriously setting me back. All i wanted was to display the site on my second monitor so i didnt have to swap window depths in rapid succession. This is.. more trouble than it seems to be worth... How do i NOT lose my data?
Its worth noting that all the lines say "OK" next to them, not one mentions a fail of any sort.
When i Ctrl+C to break out, it doesnt, just gives me ^C
I have a bit off a strange one here, my internet stops and starts. One minute it is fine and the next it will not connect to any web pages or even to the router then its fine again. My machine is a new build Pc were I installed 11.04 as a fresh install, everything was fine till a few days ago when this all started up. I connect to my router via a wired network, the new PC also has a second HD with windows 7 on it and that is fine with the net so I know it must be some sort off software issue but I have not idea what.
Machine setup
Intel 3.3GHz i5 core
4 gig RAM
GeForce GT 220
[code].....
I'm trying to get a handle on starting/stopping and managing processes. I was playing around with rcconf and things I disabled (or enabled there) didn't take effect. I found the initctl command, so that led me to believe I'm using Upstart instead of all the rc and init directories. Is there any way to tell? Could I be running both? I'm running an Ubuntu 10.04 server.
View 1 Replies View RelatedI will be switching to Debian soon and have been forming a large script with a vbox test system to automate my system configuration when I switch.
When I install lamp (Or basically it's equivalent packages) apache and mysql start up automatically.
I could just use update-rc.d to remove the autostart but whenever there's a security or feature update for the package the files get replaced.
In addition, for some reason the system thinks it's a good idea to autostart half a dozen apache2 processes at the same time, sucking up a good 150Mb ram when not doing anything. (Anyone know why?)
How would I stop my system from doing this? Could I "chmod 000" the /etc/init.d files?
I'm having trouble with printing a PDF that is in landscape mode. When I tell Okular or Adoble Reader to print a document in landscape mode, the text is Illegible. If I tell it to print as portrait mode, then I can read the text but the end is cut off and there is no way for me to tell Okular or Adobe Reader what the margins are. That option was grayed out.
I'm having another problem: When I cancel the job from the CUPS interface, it says it canceled the job but the printer keeps going and finishes whether I want it to or not. With 11.2, I was able to have it set up so that when I told it to stop the printer, it did so right away. Why can't I get the printer to stop in the middle of a job if I see something wrong with it so that I don't have to waste ink?
I'm trying to stop all the services on port 80 by I'm not entirely sure how.Infact, I don't really know what's running on port 80... I tried throwing a netstat -a in a prompt but I don't see port numbers anywhere so I can't figure out which PID to kill.Any ideas on how I can figure out what's running on port 80, and stop it?
View 14 Replies View RelatedI've been plagued with this problem for weeks. It finishes writing the DVD but after it ejects and reloads, it doesn't go through the verification process. Yet I never fail to hand-verify the DVD using 'cmp'.
In this case today I created a multi-directory DVD and had an .iso image made first. It's still sitting there in /tmp (with a backup copied to /opt so I can close out k3b). How would I verify the .iso against what's on the DVD? How does k3b do it? Hopefully this means a command line solution.
BTW what are the command line apps for burning and verifying a DVD? I'm not so hot on graphical apps for this task anymore.
