Ubuntu :: Stop The Splash Screen 'can't Mount /dev/md0' Press?
Nov 14, 2010
I've set up a RAID6 array with a normal hard disk (/dev/sda) for boot. However whilst rebooting the computer I noticed that ubuntu is booting into a splash screen asking me: Can't mount /dev/md0 (which is my RAID6 array) Press s to skip, c to continue, something along those lines. The reason for this is that one of the drives from the RAID6 array was showing Uncorrectable read errors towards the end of the disk.I was unaware of. I'm in the process of replacing this.
As this server is completely headless (all I have remotely is SSH), I had to plug in a monitor and keyboard to find out that all I had to do was press S to get it to boot. Wasted around an hour for that!
So my question is, how do I get Ubuntu to stop automatically trying to mount /dev/md0 before it boots? Booting so that I can get SSH access is more important than getting the raid drive. Here is my /etc/fstab file (note I've put a # in front of /dev/md0, sdg1 and sdh1 are external ESATA drives, UUID is the swap):
[Code]...
View 1 Replies
ADVERTISEMENT
May 12, 2010
As it says .. I use Amarok on Gnome and have no need for K-Wallet. Is there a way to stop the set up splash screen? (minor annoyance)
View 3 Replies
View Related
Jan 16, 2011
I saw a post where you were faceing "Type s for swith or M or mannual restore"
I got the same message. I tried S but nthing happend then I tried M. it took me to root@ubuntu:/#
How i restore it manunally or if not possible I need to back up the data to pend drive
but i cant find the pendrive in the home section.
View 2 Replies
View Related
Apr 25, 2010
If I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
View 9 Replies
View Related
Jan 26, 2011
Since updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
View 6 Replies
View Related
Mar 26, 2011
I'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
View 2 Replies
View Related
Oct 25, 2010
I recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
View 1 Replies
View Related
Jun 26, 2011
actually some my windows ntfs partiitions are unable to mount at start up. the error msg is -'some of your partitions are unable to mount press 's' to skip or 'm' to manually mount.
View 14 Replies
View Related
Feb 15, 2011
I upgraded to 10.10, system rebooted but it is stuck at a constant loop.
I can go into safe graphics mode and things look fine except compiz isn't running. I have tried going into login and changing it to log me in automatically but the problem remains.
I've tried using my previous kernal and I have the same issue as this newer one.
I've tried loading gdm from CLI and the problem is still there.
View 2 Replies
View Related
Oct 30, 2010
I have installed Ubuntu 10.10 x64 bit edition. On booting Ubuntu wouldn't mount my partitions, so I installed pysdm to auto mount them during booting. But since then I often get during boot: Press S to skip mount or M for manual recovery. What should I do?
View 1 Replies
View Related
Mar 29, 2011
openSuse 11.4 64bit fresh install, KDE 4.6.0. Now I am probably being obtuse, but If I click on the wonderfully named "My Computer" I get, among other things, a display of Disk Information; hard drive partitions and any DVDs or CDs. If I let my mouse cursor alight on any of these, I get a message "Press the right mouse button for more options (such as Mount or Eject)" But if I press the right mouse button, I don't get those options; I get a message "Open in new window, Open in new tab, Open with ..., Create file project with K3b, and Compress ...".
View 5 Replies
View Related
May 12, 2011
When I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
View 6 Replies
View Related
Jul 21, 2010
I received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
View 2 Replies
View Related
Jan 26, 2011
I need a guicance related to mounting USB stick of 2GB capacity. Normally when I insert my USB stick it mount automatically and show me.I want that instead the usb mount automatically I manually mount it. Now there are two steps to do it. First How to stop USB to mount automatically ? Second How to mount it manually ?
View 1 Replies
View Related
Mar 23, 2011
I'm randomly getting 'Continue to wait; or press S to skip mounting or M for manual recovery...' or something like that at boot ((it flashes very quickly)- If I don't press anything, I'm prompted for my password (I configured it to login with password) and the desktop loads...
I'm using Ultimate Edition 2.6.1 -> Ultimate Edition Home
I was using my 1TB hdd to dual-boot linux, windows, and for storage...Yesterday, I imaged the linux partition, and restored it to an approximately 66GB partition I created on a 150GB hdd...Besides the 66GB partition, the rest of the 150GB hdd is 'unallocated space'... That's when the above message started...Below are screenshots of the fstab and partitions as they are now...
View 9 Replies
View Related
May 21, 2010
Out of nowhere Ubuntu (intrepid, I believe) has stopped loading for me. When it attempts to load gdm the screen starts flashing at the splash screen and then eventually dumps me to the terminal. From there I can login without any problems but can not get the GUI to load.
When I run sudo gdm-binary it does the flashing splash screen again and then spits out the error message: WARNING: Unable to find users: no seat-id found. Then a few warnings about longest graphic displayed 2.5xxx seconds
I tried running sudo dpkg-recondifigure gdm and relaunch gdm as above and it did the same thing.
I was not able to successfully connect to my wireless network through the terminal to try to update in the hopes of that fixing the problem. Perhaps someone can give me instructions on how? (I have tried but can not figure out how to initialize wlan0).
Or, is there something I can do from my installation CD?
View 2 Replies
View Related
Dec 22, 2010
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
View 7 Replies
View Related
Oct 25, 2010
I'd like to use a webmin to execute scripts as the picture. When I press "Stop friendly" button, it will execute the script that is located at /home/kenzo/stopfriendly.sh or it will execute /home/kenzo/stopserver.sh when I press "Stop" button.
View 1 Replies
View Related
Jul 30, 2010
Whenever I press log out it goes to a black screen and then my whole computer is unresponsive, i have no idea what is causing this.
View 8 Replies
View Related
Mar 12, 2011
When I press Ctrl-Alt-F1-F6 the tty is a blank screen. I can type but it doesn't ask for a login or anything.
View 2 Replies
View Related
Sep 22, 2010
My Ubuntu was working perfectly fine until this morning. It is the latest release (10.04 I think) and it is the 64 bit version. This morning I go to my computer and see there are some updates waiting. I install the updates without paying much attention to them. I really do not remember what the updates were. Then Ubuntu asks me to restart so I restart. After restart I get the usual log in screen and I hear the drums. I put in my password, press enter and then the log in screen disappears and I expect to see my desktop. But that does not happen. Instead in a split second after disappearing, the log in screen reappears and I hear the drums again.
At the beginning I thought that I simply forgot my password. But that is unlikely because I have been using the same password for 6 years now. But just in case I tried an incorrect password and I got a different behavior. If I put in an incorrect password, Ubuntu will simply say "authentication failed" and the log in screen will not disappear. When I put in the correct password, the log in screen disappears for a split second (as if my password is correct) but then instead of taking me to the desktop it takes me back to the log in screen and sounds the drums again.
View 9 Replies
View Related
Mar 27, 2010
I wonder if there is the possibility of getting to press any key and the F6 for example, Fedora starts up a screenshot, equal to application "form screen capture image" in the menu acessories .. The problem is that if I want to do this I have to be opening up the application every time .. and I like to do with was fast, just by clicking F6 or printscreen for example ..
View 14 Replies
View Related
Nov 10, 2009
So I pressed ctrl+alt+F3 and now my whole system is basically one big terminal - black screen and only accepts terminal commands. How do I go back to the 'normal' Ubuntu desktop screen? Rebooting only takes me back to the terminal command page described above. I can access root commands with sudo bash and my password, if fact all terminal commands seem to work. Is there a command I can use to go back to the regular desktop?
View 10 Replies
View Related
Apr 22, 2011
I get black screen when i press ctrl-alt-f1 or when i try to stop gdm, pressing alt-f7 nothing happens.
vga is ati hd 5650 how can i fix?
View 1 Replies
View Related
Feb 10, 2010
The screen that with the background pic at below is it call splash screen?
How to change the screen at above to text based that shows what services have been started, and if the service has been started, it will show ok at the right side.
View 2 Replies
View Related
Jun 1, 2010
I installed 10.04 on my Toshiba laptop, but for some reason there is no violet splash screen with the "Ubuntu" word when the system is loading. Instead there is a bald dash in the upper left corner that keeps blinking and then it is changed by regular font dash, then there are some letters (like system is checking something?) and that's it, one second after my desktop welcomes me. What could be the problem? I feel like I haven't had such a problem when I was installing it on another computer. Though it might be because I am installing from USB drive, but not, installed from CD with the image recorded and still the same problem.
View 2 Replies
View Related
Jul 15, 2010
I want to set a different splash screen instead of the one that shows up just before and just after I log in (Ubuntu and the loading bar)
I installed gnome-splashschreen-manager and through that I set the splash screen to another jpg image but this doesnt seem to work. I dint see any difference after rebooting. Am I doing something wrong in GNOME Splash Screen Preferences? This method seemed really straight forward.
View 4 Replies
View Related
Apr 19, 2010
I installed the beta version of Ubuntu 10.4, and on top of that Ubuntu Studio (for the programs it brings with it); but don't like the splash screen.
How do I disable it? (I tried uninstalling the Ubuntu studio desktop, but it did not remove the splash screen).
*Edit, following Ubuntu studio apps are still installed on my system:
Code:
ubuntustudio-default-settings ubuntustudio-screensaver
ubuntustudio-icon-theme ubuntustudio-sounds
ubuntustudio-look ubuntustudio-theme
ubuntustudio-menu ubuntustudio-wallpapers
View 9 Replies
View Related
May 3, 2010
Some time ago I installed KDE on my machine, though I use gnome as the default. (I rarely login on KDE) .Since then, when I login in my default gnome I get those futuristic KDE cursors, which I hate by the way. I've been trying to go back to my default cursors but I've had no success. I go to System -> Appearance -> Customize -> Pointer and then I select Default Pointer or even DMZ (white) I click on close twice and nothing happens. I've even removed the "oxygen-cursor-theme" using the package manager. How can I get my default mouse cursors back?
On the same note, before I get the login screen and after clicking on logout/restart I get a Kubuntu blue (splash?) screen, I'd prefer not to get this screen. how to get rid of this, too? (Getting rid of the cursors would be most important, but if I can get rid of this screen it'd be nice, too)
View 3 Replies
View Related
May 23, 2010
I recently installed from scratch the Lucid Lynx, and after changing the direction of the window buttons and a few things more (who was the idiot who thought on having a purple terminal?), I completely loved it.
I had one problem through, is that when I boot my computer, there is no splash shown. After the GRUB menu, all I see is a black terminal with no text for some time, and then a quick view of some colored text. Does anyone else have this problem? Here is the appropriate section of the grub.cfg file:
Code:
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
[Code].....
View 1 Replies
View Related
