So, today I've installed a new splash screen:
Code:
http://gnome-look.org/content/show.php/AzenisBuntu+plymouth+themes?content=138960
And after the burg screen (yes, I have burg installed too) and some other stuff while booting, the splash screen only appears like 2 seconds before the login screen.
Is there any way I can make it last longer?
I'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
I just installed Ubuntu Netbook 10.10 on my new Asus Eee PC 1215T, and I'm having trouble getting Internet access. When I first start up or reboot the PC, I'll have network access, but not Internet access. I'm connecting via a WAN at my university, and so the first thing you have to do is "register" the computer on the network (by visiting a certain website on their intranet) before it will allow you to access the Internet. Takes about 3 minutes to register it. I have enough time to *begin* this registration process, but I've tried several times and I can't get all the way through it before I mysteriously lose all network access. Unfortunately this is a brand new machine and came without any OS installed, so there's no way I know of to test whether this is defective hardware or not.
View 1 Replies View RelatedI have just upgraded to the latest testing packages with aptitude and now when I log in I get 2 error messages. One is "Your session only lasted less than 10 seconds. If you have not logged out yourself, this could mean that there is some installation problem or that you may be out of diskspace. Try logging in with one of the failsafe sessions to see if you can fix this problem." and then if I click on view details I get "/etc/gdm/Xsession: Beginning session setup..." As long if I don't click OK the system (LXDE) is completely usable and the only thing that doesn't seem to be working properly is wifi - I think I was using network manager which doesn't seem to be loading. The other error message is: "GTK+ icon theme is not properly set This usually means you don't have an XSETTINGS manager running. Desktop environment like GNOME or XFCE automatically execute their XSETTING managers like gnome-settings-daemon or xfce-mcs-manager.
If you don't use these desktop environments, you have two choices:
1. run an XSETTINGS manager, or
2. simply specify an icon theme in ~/.gtkrc-2.0.
For example to use the Tango icon theme add a line: gtk-icon-theme-name="Tango" in your ~/.gtkrc-2.0. (create it if no such file)
NOTICE: The icon theme you choose should be compatible with GNOME, or the file icons cannot be displayed correctly. Due to the differences in icon naming of GNOME and KDE, KDE themes cannot be used. Currently there is no standard for this, but it will be solved by freedesktop.org in the future." clicking OK brings up icons etc. and desktop background. I am using an SSD and when I set up the laptop I think that I made /tmp a folder on a ram disk (and maybe a few other temporary files as well). Could this have anything to do with these error messages? (one also pops up about battery empty when the battery is still @ 100% but that is less irritating)
I recently powered up my netbook... Selected my user log in, entered my password, and after a couple seconds I briefly see what looks to be the console and am returned to the login splash screen... I can Ctrl+Alt+F2 to get to the console and log in... but that is as far as I can get. This is the case for Gnome, Remix, and Remix 2D.
I can sudo apt-get (update, upgrade, etc) as well. It is the right password because if I type in a wrong one it presents an authentication failure dialog box.
How can I fix my log in screen and get to my desktop? I am Currently running 10.04.... waiting to get 10.10
Just got my EeePC installed with the latest release of ubuntu netbook and have used update manager to get the system to the latest versions including the latest Adobe flash player.
I'm having problems with BBC iPlayer though. When I watch in full screen mode, it only lasts for 10 minutes then reverts back to the Firefox browser.
This morning I ran an upgrade which upgraded the kernel from 2.6.35-28 to 2.6.35-30 on my Maverick system. I then departed for a meeting and came back to discover that my system had rebooted itself and only booted into an initramfs prompt.
Rebooting again shows a very brief flashing message of "error: unknown filesystem" alongside a few other errors I cannot read in the 1/4 second the error lasts on screen before the grub prompt. Neither kernel boot nor recovery mode options take me anywhere except to the initramfs prompt. I have searched and found a few threads on similar issues, but they all involve different fixes and suggest causes (such as dual booting on an ntfs drive, which I do not do) such that I am unsure where to go from here.
The boot splash only appears for 2 seconds, and it doesn't even have the ubuntu logo / loading bullets. After 8 or so seconds later, the boot splash (with ubuntu logo / loading bullets) will either reappear for disk checking or error reporting or it displays the login screen.
ATI Technologies Inc Cypress [Radeon HD 5800 Series]
Driver: ATI/AMD proprietary FGLRX graphics driver
Direct Rendering: Yes
Memory: 1GB
Ubuntu 11.04 (Natty Narwhal)
Kernel: 2.6.38-11-generic
Architecture: 64-bit
Processor: AMD Phenom(tm) II X4 965 Processor
Memory: 6GB
If I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
View 9 Replies View RelatedSince updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
View 6 Replies View RelatedI recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
View 1 Replies View RelatedWhen I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
I received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
Out of nowhere Ubuntu (intrepid, I believe) has stopped loading for me. When it attempts to load gdm the screen starts flashing at the splash screen and then eventually dumps me to the terminal. From there I can login without any problems but can not get the GUI to load.
When I run sudo gdm-binary it does the flashing splash screen again and then spits out the error message: WARNING: Unable to find users: no seat-id found. Then a few warnings about longest graphic displayed 2.5xxx seconds
I tried running sudo dpkg-recondifigure gdm and relaunch gdm as above and it did the same thing.
I was not able to successfully connect to my wireless network through the terminal to try to update in the hopes of that fixing the problem. Perhaps someone can give me instructions on how? (I have tried but can not figure out how to initialize wlan0).
Or, is there something I can do from my installation CD?
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
This problem started within the last few minutes. I run a program in my browser that uploads data from my machine (ubuntu) to another machine (Fedora 13), for manipulation and then spits back the data that does not match our standardised information.
When I tried to run it a few minutes ago, it seemed to take a long time to make the connection. I went back and checked the machine, everything was connected and fine. I decided to reboot the machine from within KDE and then try again. Same result. I went to the machine again and tried to login through KDE, the screen goes black for a few seconds and then returns me to the login screen. I switched over to a virtual terminal and was able to login using the same credentials. I checked the .xsessions-errors file and this is what I am seeing:
[Code]....
how do i get my ubuntu screen to not go dim after like 30 seconds?
View 2 Replies View RelatedThe screen that with the background pic at below is it call splash screen?
How to change the screen at above to text based that shows what services have been started, and if the service has been started, it will show ok at the right side.
I installed 10.04 on my Toshiba laptop, but for some reason there is no violet splash screen with the "Ubuntu" word when the system is loading. Instead there is a bald dash in the upper left corner that keeps blinking and then it is changed by regular font dash, then there are some letters (like system is checking something?) and that's it, one second after my desktop welcomes me. What could be the problem? I feel like I haven't had such a problem when I was installing it on another computer. Though it might be because I am installing from USB drive, but not, installed from CD with the image recorded and still the same problem.
View 2 Replies View RelatedI want to set a different splash screen instead of the one that shows up just before and just after I log in (Ubuntu and the loading bar)
I installed gnome-splashschreen-manager and through that I set the splash screen to another jpg image but this doesnt seem to work. I dint see any difference after rebooting. Am I doing something wrong in GNOME Splash Screen Preferences? This method seemed really straight forward.
I installed the beta version of Ubuntu 10.4, and on top of that Ubuntu Studio (for the programs it brings with it); but don't like the splash screen.
How do I disable it? (I tried uninstalling the Ubuntu studio desktop, but it did not remove the splash screen).
*Edit, following Ubuntu studio apps are still installed on my system:
Code:
ubuntustudio-default-settings ubuntustudio-screensaver
ubuntustudio-icon-theme ubuntustudio-sounds
ubuntustudio-look ubuntustudio-theme
ubuntustudio-menu ubuntustudio-wallpapers
Some time ago I installed KDE on my machine, though I use gnome as the default. (I rarely login on KDE) .Since then, when I login in my default gnome I get those futuristic KDE cursors, which I hate by the way. I've been trying to go back to my default cursors but I've had no success. I go to System -> Appearance -> Customize -> Pointer and then I select Default Pointer or even DMZ (white) I click on close twice and nothing happens. I've even removed the "oxygen-cursor-theme" using the package manager. How can I get my default mouse cursors back?
On the same note, before I get the login screen and after clicking on logout/restart I get a Kubuntu blue (splash?) screen, I'd prefer not to get this screen. how to get rid of this, too? (Getting rid of the cursors would be most important, but if I can get rid of this screen it'd be nice, too)
I recently installed from scratch the Lucid Lynx, and after changing the direction of the window buttons and a few things more (who was the idiot who thought on having a purple terminal?), I completely loved it.
I had one problem through, is that when I boot my computer, there is no splash shown. After the GRUB menu, all I see is a black terminal with no text for some time, and then a quick view of some colored text. Does anyone else have this problem? Here is the appropriate section of the grub.cfg file:
Code:
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
[Code].....
I just installed Kubuntu 10.04 on my Desktop computer. Prior to KDM loading, all I get is a blank, black screen with no Plymouth splash screen. I'm confident that this issue is not related to KDE but would apply to all Ubuntu variants. Here are my computer specs:
Kubuntu 10.04 x64 running with all updates
Dell Studio Desktop
Intel Quad-Core Processor 2.66Ghz
8GB ram
Intel Integrated Graphics
I should note that I have full desktop effects running smoothly under KDE with compositing enabled, so my integrated graphics is not necessarily the problem unless Plymouth is not loading the graphics drivers successfully.
I have poured over many forums and countless posts on how to do this and i cant seem to get it,i have been trying for the past 8 hrs to change the splash screen in my ubuntu 10.04 lts lucid lynx,i have installed startup manager and splash screen and have tried using those to edit my splash screen to no avail i have no idea what im doing wrong
View 2 Replies View Relatedhow do you change the splash screen? i.ve looked all over the internet but common sense tells me to just ask on here.
View 9 Replies View RelatedI finally broke down and upgraded to Lucid since Intrepid reached "end of life", but I liked Intrepid's Ubuntu startup splash screen much better. Is there any way to get that back in Lucid?
View 1 Replies View RelatedI just used the update manager to update to the latest kernel. There were other updates there, but I can't remember what all they were.
Now the computer won't get beyond the splash screen. I waited about 15 minutes the first time for it to load. When I hit esc during the splash screen, I got this warning
Code:
GLib-WARNING **: getpwuid-r(): failed due to unknown user id (0
After that I think there is more, but my screen runs out of room, but I have this sense that there is more.
Anyway, that might have nothing to do with the problem. When I boot to recovery mode it finds all the stuff plugged in to the motherboard and USB drives then just stops.
Booting to the old kernel works just fine.
SO, after about a week of research and trying to get the splash screen to appear on my netbook...I've sort of got it...but not. Here's the low down.
1- Had no boot splash at first. Now I do in low rez.
2- Had shutdown splash in Hi rez...now in low rez.
3- Boot splash lasts about a second at best...prior to that... black screen after I select ubuntu from the boot menu.
I have tried editing grub, updating afterwards, startup manager, online text help...nothing seems to be working to get the end result of Nice looking Plymouth splash screens (the nice purplish UBUNTU screens)
My netbook is an ASUS 1005PE with 2 gigs ram. Ubuntu is the only O/S (Boot menu shows the back up of the win7 install on my smart card). I am running the 64bit version. I also have Ubuntu on my HP HDX18 dual booting with windows7. No issues there. Hence my confusion.
Now...I'm not the most Linux sauvy to say...the last time I looked at Linux was Redhat back in '95 or '96. I'm a dos guy... so I'm not opposed to learning...just need to understand it better thats all. Anyways...if anyone can shed some light on this, that would be awesome. Aside form this hickup, everything seems to run just fine.
I removed Cairo from synaptic. Since then Ubuntu doesn't start - it gets stuck on the splash screen, which is Mac-like (since I had installed Macubuntu): I see the apple logo and the rotating wait prompt is running like hell. My pc has dual boot (Vista is my other OS) with grub2 loader.
View 3 Replies View Related