I tried Kubuntu and it have a nice function that not closing all programs when shutting down ("not closing" explicitly) . So if I start the Kubuntu the next day, all the program will appear in the same state. in my Ubuntu, when pressing "shut-down", a message box pops asking : "Are you sure you want to close all programs and shut down the computer?" and I press "yes" (cause you are not leaving me any choice! [the other option is "cancel"] ).
I'm new to Conky, and have shamelessly copied from the many other conkyrc files posted here! I have Conky set to start up with a 15 second delay, and it does. But frequently when I close another programme (eg Firefox) Conky disappears. It's still running, and if I log out or reboot I see it for a flash, and it appears OK again when the system starts up.
System info: Ubuntu 10.04 Kernel 2.6.32-24 generic Gnome 2.30.2
I'm running Xubuntu 10.10 via USB on a Dell Latitude D505.Wireless card is a Netgear WPN111 and I'm using ndiswrapper to make it work.
My problem is this:when I open any web browser and try to navigate to a page, the whole system freezes for a few min before crashing to desktop.Using Task Manager during this time reveals that processor usage jumps to 100% and stays there until the program closes.I've tried Xubuntu on another, faster machine and it was fine. From this I conclude that it's related to the hardware, and I think it may be some hardware protection feature operating.
I am having a weird problem here. The open programs are closing secretly without giving any indication or issuing error. For example I open couple terminal and some minutes later I look at my screen, boom they are not there anymore. This issue is not just limited to terminals, other gui apps suffer from the same thing. Does anyone know if any program or service would do such a thing?. I am scratching my head here to figure out why that is the case It just started happening today.
1) Any process (including boot, shutdown, download, open programs, etc) is freeze (don't have any progress) until I move the mouse or hit any button, so for install and use my ubuntu I have to keep moving my mouse and as you imagine is VERY TIRED.2) I get some general freeze on random times, neither the mouse, keyboard or process move, I notice that if I unplug power it unfreze, and I can work for some time.This 2 problems annoy me a lot, and I suspect is a problem related to my Netbook Model, I read about someone that has the same problem but no solution there.
This is what I did:I Try Ubuntu loading from my USB memory (1GB), run very good but with the 2 problems, but I thought it can be resolved installing.I installed along side with W7, couldn't boot Ubuntu, so I configured GRUB2 and it could enter now, but if I don't press **** after selecting Ubuntu it give me the BusyBox, and then the same 2 problems.I get rid of my W7 and did a Full Install on my 160GB HDD, hoping it can work fine, but no.I install all updates and no effect on that.
I have installed a cluster computer with 10 nodes . The manufacturer is HP . All nodes and the master node have redhat enterprise linux installed in them . When I shutdown the nodes from the master terminal using "shutdown -h now" they get shutdown . But they dont get completely turned off . This issue bothers me when the power supply is given , all nodes boot up simultaneously generating a huge heat .
Thing to note : When we shutdown our PC they get completely turned off . When the power supply is given , a press on the Power On button is required to boot the system. But , why does it not happpen in the case of cluster? Is there any other way of completely turning off the nodes from the master terminal ?
when my pc boots and shuts down my monitor goes into 'input out of range' mode for a bit between the gui and the text only phases of boot/shutdown.is there a way to fix this? or where to start troubleshooting?also, when it shuts down it hangs after coming back to the text only part
Recently I installed vncserver (tigervnc) on my desktop. Ever since my computer refuses to shutdown normally. At shutdown the following message pops up: Quote: System policy prevents stopping the system when other users are logged in Then I have to enter the root password to shutdown. If I stop vncserver before, the computer shuts down normally.
I cant shutdown without running sudo shutdown. When I try to use the default gnome shut down it takes me back to the logon screen. Fresh install today and I've had the same problem on other installs.
Ubuntu will randomly pop up the shutdown menu and then shutdown.It seems to happen when im in firefox and typing and it has been difficult to replicate. I dont think it is a temp issue since watch sensors shows temmp of 40-50C. Someimtes it happens every minute someimtes i can go 10min without it happening.
Dell Inspiron 1525 ubuntu 10.04 (only os on system)
looking for a command that shutdown/reboot my ubuntu just same as process that happened when I press shutdown buttonIn fact I need to close all programs that are running and then PC shutdown (that happened when I press shutdown button).
I cannot locate shutdown log for Linux shutdown to check various activities carried out during shutdown. I can view Startup Log which is availble on console>Applications>System Tools>System Logs.
I have included Shutdown/Startup in dbora, so that Oracle 10gR2 Shutdown/Startup will be automated during OS Shutdown/Startup.
I want to check Shutdown log because Oracle Shutdown was not running, as from $ORACLE_HOME/shutdown.log contains no entries, where as startup log contains latest startup details.
That means here 2 issues are there. One, I want to locate OS Shutdown Log and the other being Why Oracle Shutdown not getting executed.
When I close the lid on my Dell Mini 9 (Ubuntu 10.04 UNR) the sysgtem freezes. Is there anything I can do to prevent this? That didn't happen with 9.04 UNR.
Several times now my PC with Ubuntu 10.04 LTS installed wont close down. I click on all the appropriate buttons but the system doesn't shut down. I have to press the on / off button on the computer to end my session.
I have been using Ubuntu 10.04 LTS for several months and recently the system has stopped closing down cleanly. It starts okay and runs just fine, but when I come to closing down it doesn't do anything after I've clicked on the shut down button. The same happens with the restart button. I have been closing the system by pressing the power button on the front of my tower. I have no idea as to why it won't close ... I haven't installed any extra software, so I guess it's a system problem. Closing down by pressing the power button cannot be doing the OS any good, so I could do with a fix ASAP on this one.
I did a live upgrade from 11.3 KDE and observe a following issue.When I press the shutdown button on the laptop it initiates the shutdown and shuts down fine but after a significant delay of time (something like 30 seconds). When I click the shutdown button in KDE it initiates the shutdown instantly. This was not the case in 11.3 where the shutdown worked the same regardless of the method that triggered it
Is there a way to stop conky from closing when I click on it? I have a few set up as a system monitor bar on the desktop, and I'd like to anchor them there from accidental clicking so I don't have to restart my script.
I have some screen questions. First, can you give screens names (such as whatever app you're screening), and second, how do you exit from a screen without closing the app (ie exit screen back to the command prompt, do your thing, then screen -r it)?
I recently noticed my RAM problem. When I start any application it increases RAM usage but even after I close it RAM usage doesn't go down. Instead when I restart that application RAM usage goes up again. Using ubuntu 10.10
how could I can stop and close all program for no activity (when screensaver is activating, or after 1 minute of no activity on computer)
I want to use Ubuntu for public free (no password and no limit) and want to close program if somebody leave open firefox after 1 minute of no activity so it will back desktop page.
I tested 11.04 beta 1 on one of my computers and was happy to see VmWare workstation 7.1.4 to work fine on it. Then I decided to upgrade my most frequently used computer to 11.04 beta 2, but I can't get VMware to work properly. When I click on some of the function button such as start a VM or maybe change a setting VMware just closes. I can't figure it out, I've tried it with Unity, Gnome with effects, Gnome without. Nouveau driver, Distro nVidia driver, downloaded nVidia driver, and VGA driver. It was nothing to do with Video driver, but that is about the only hardware difference with the other machine that works, it has Intel Video.
Long-time Unix/Linux user, just got a new Xubuntu box set up to be a fileserver using SAMBA. I've noticed that every 8 minutes or so, the fileserver will disconnect any user currently accessing any files. My first instinct is to unload the GUI and tackle it from the terminal command line. However, every time I try to close out Xubuntu using "sudo init 1" I get taken to the Xubuntu splash screen and the box will no longer respond to any commands. I can post any relevant information requested about the system, build, and version.
For the past 3 days skype has been giving me problems for some reason. I start it, the sign in screen shows up and like 5 seconds later it closes, I check if the process is still running but it's not so it just shuts down. I've tried uninstalling it from synaptic package manager, then installing it again and it's still doing me this.
I am encountering a Problem with the TeamSpeak server that I host on my Ubuntu Machine. The Problem I'm having is that when I restart the Computer before Stopping the Service from the Terminal, The Server would encounter an error the next time it is started.
I would like to know if there is a File somewhere that is run when the User want to Reboot or Shutdown the PC, or if I can write a script that runs before Shutting down.
so i start it with ssh -f -R 4096:localhost:22 me@server.com and it comes up and someone can log in at the remote end. how do i close the tunnel from the initiating end ? netstat doesnt seem to identify my end of the tunnel , unless im looking for the wrong thing!
I'm trying to add a network printer. I went to Admin > printing > New...It started searching for printers, then brought up a "New Printer" box... So I expand Network Printer, and go to "windows printer via SAMBA"When I hit browse, it shows my workgroup, so I expand WORKGROUP, and it shows the PC thats sharing the printer... however, soon as I expand that PC thats sharing the printer, the WHOLE thing closes out Printer configuration, new printer, SMB browser, all of it closes as if i killed the process or something... I can even refresh and try expanding workgroup again and it'll close out
