I'm trying to change the bash prompt and based on the man pages $ should show a $ which changes to a # for a SU. However, this doesn't happen on my machine, it's $ for both user and SU.The line in .bashrc is:export PS1="u@h:w$"
View 7 RepliesI have one account on an Ubuntu server with the correct PS1 variable and I want to make one of my other accounts on the same server have the same PS1 variable, so that my prompt on this new account (when I ssh into the machine) is the same as the original account.
Is there a way that I can pass this PS1 variable between accounts so the prompt is the same?
I have tried printing it out, copying the output, and then reassigning it to PS1 on the new account, but it just doesn't work.
Here is what is printed when I type echo $PS1:
[e]0;u@h: wa]${debian_chroot:+($debian_chroot)}[�33[01;32m]u@h[�33[00m]:[�33[01;34m]w[�33[00m]$
I want to assign that prompt (shown above) to my new account.
I'm trying to change the Xfce Terminal Emulator prompt from bash-4.1$ to something like what kconsole has. If i issue a /bin/bash -l in the terminal, then I get the prompt and the colors that I want, but I'd like this to automagically happen when I click the Terminal icon in the Xfce panel.This is for Slackware 13.37 (32bit) and Terminal 0.4.6
View 2 Replies View RelatedI am getting more and more comfortable working with the shell, thus I would like to change its prompt color to my liking, as it will be easier for me to distinguish commands vs. outputs.
I've read a couple of instructions of how to change the .bashrc file and am familiar with what the codes in PS1 mean. Except, this file can be intimidating to newbie eyes.
Where exactly on the file is it that I need to make the change?
Here is what I am trying to do. I would like my prompt to like exactly like the prompt I use in Backtrack - which consist in two different colors, one for the host and another for the pwd. Here is what the Backtrack .bashrc file looks like:
# /etc/profile: This file contains system-wide defaults used by
# all Bourne (and related) shells.
# Set the values for some environment variables:
export MINICOM="-c on"
export MANPATH=/usr/local/man:/usr/man:/usr/X11R6/man:/usr/local/share/man:/usr/bin/man:/usr/share/man
export HOSTNAME="`cat /etc/HOSTNAME`"
[Code]....
I also read that in order to have the same results when I log in as root, I will have to copy the modified .bashrc file into /root
I'm running Red Hat Linux 5.4 on HP DL580 server with 16 processors and 64 GB of RAM. I'm connecting to the server remotely through SSH. after entering the password, it takes time to return the command line, if I click ctrl+c during this time, I'll have the command line prompt but not the correct bash prompt (I have to run bash to pass to my correct prompt).I tried to install Apache on the server, ./configure took 4 hours to finish instead of 1 or two minutes, Oracle installation same behavior. Server Disks are mirrored using RAID controller.
View 6 Replies View RelatedI would like to change the formatting on my BASH prompt from this:
anon@machinename.domain.poo:~/some/very/annoying/long/path$
to something like this:
anon@machinename.domain.poo:~/some/very/annoying/long/path
$
The idea is that I would be able to type a reasonably long command on one line without it wrapping to the next line so quickly.
Currently the terminal prompt looks like this:[karlis@karlis-desktop current_folder]$How can I minimize the prompt, so that it only shows $ or # without extra info in square brackets?I checked the preferences for the default Gnome-Terminal and Terminator - there are no settings for this. It is pretty hard to use terminal when working in directories with long names.
View 1 Replies View RelatedAfter writing a new prompt for Bash, I noticed that one character of my commands were being lost when it wrapped to the new line. Here is an image of the example (I typed 1234567890 over and over):
Here is my $PS1
PS1="
[[e[0;90m]d [e[0m]] [[e[0;90m]$(/bin/ls -1 | /usr/bin/wc -l | /bin/sed 's: ::g') files, $(/usr/bin/du -sh | cut -f1)[e[0m]
[[e[0;36m]#[e[0m]] [e[0;95m]u[e[0;90m]@[e[1;92m]h[e[0m]: [e[1;34m]w [e[1;30m]$[e[0m] "
What have I done wrong?
Everytime I log into the linux server at my workplace (I use putty), I don't get the bash prompt right away. I need to execute the command 'bash' to get it. Anyway to make this automatic? e.g.
Code:
host:1>
host:1> bash
user@host:~$
I've written custom prompts for several boxes but this one has an error I just can't identify and need a second set of eyes to help solve it.
I've set the following as my prompt: PS1="[e[30;42m]u@h[e[0m][e[30;47m] #][e[0m][e[32;1;40m]w>[e[0m] "
(hostname/un obscured & image enlarged slightly to make it easier to read.)
Everything looks fine initially as you can see here:url
1- It sets the username@host in back on green text.
2- It then changes to an off-white an prints the command number for the terminal.
3- Next, changes to a green on black font and prints the working directory.
4- Finally is prints a ">" character and a space.
The problem occurs when I try to "up arrow" to reuse and/or edit a prior command. It prints the prior command fine, but if I arrow over to edit the command sometimes the first character can not be deleted from displaying as you can see in the following composite screen-shot
url
Here I did a simple ps and piped it through grep. After getting the output, I up-arrow to repeat the command. As you can see by the second section the cursor only goes back to the "s" in ps. The "p" can not be deleted. Hitting enter just displays a new line, so the "p" was just a ghost being displayed and not really there.
I would like to modify Bash Prompt so it does not show the whole $PATH but just the current and parent directory. I am using Ubuntu.
View 3 Replies View RelatedI have a script almost working except for 1 thing. What I'm trying to do is read a file that has the files that need to be FTP'd using a bash script. I have everything working except the reading of the file. It works outside of the ftp script I've wrote but once I put it in the FTP script it doesn't.
Here's the Script:
#Here's where the problem is that I know of
I've been playing w/ the exclamation points to see if that could be the problem, but so far no luck.
I am using Puppy Version 430.I want to change the default prompt from # to the current working directory followed by one space. I can do this by opening a console window and entering PS1="w " How do I force this to persist when I restart the computer.
View 1 Replies View RelatedI have looked almost everywhere for how to change my default shell prompt. When I open my bash shell, the prompt is [fedora-dev@Fedora-Dev Documents]$. I would like it to open at fedora-dev@Fedora-Dev]$.
Can someone tell me where to change this at. I have looked in .bashrc, etc/profile, and environmental variables.
I have a PDF that I built using BIRT, and that works fine. At this point I'm trying to print it using lpr or some other command. It seems as though I should just be able to type lpr invoice.pdf and it should print to the default printer. However, lpstat -t shows "Empty print file!" for the printer, and the printer doesn't do anything, let alone print the file. lpr -l invoice.pdf prints the file, but unformatted - just a bunch of characters and whitespace on a seemingly infinite number of pages.
View 2 Replies View RelatedI'm running Debian Wheezy and I don't know why, but whenI switch to console F1(Ctrl+Alt+f1) I can't enter login information. It's like Debian didn't have completely starting and wait always.The F1 console looks like this:
[screen content]
Starting enhance syslogd: rsyslogd.
Starting system message bus: dbus.
[code]...
Choose Menu System->Administration->Users and Groups
I am able to see my Users Settings as follows:
User name: mike
Then why I still see the following prompt line? code...
If my understanding is wrong, then how can I change it in this way?
I've run into something odd:
Code:
jdougher jdougher> cd
jdougher jdougher> echo $PS1
u W>
jdougher jdougher>
For some reason, rather than replacing $HOME with "~", my prompt just displays the name of my home directory.
I was attempting to change the bash shell color prompt on my RHEL / CentOS 5 server. When I login as my user account on my server I can see my 'PS1':
Code:
[carlos@srv1 ~]$ echo $PS1
[u@h W]$
I want to change my PS1 to:
PS1='[e[1;32m][u@h W]$[e[0m] '
When I look in ~/.bashrc, I don't see my 'PS1' line so I am confused and wondering how I do this on RHEL / CentOS systems.
I'm playing around with my prompt, and for some reason under certain conditions part of the prompt is output twice.
- When my terminal window isn't maximized it always outputs the prompt correctly.
- When the window is maximized it outputs the prompt correctly when I enter an empty command (ie, when I just hit enter).
- When it is maximized and I enter any command, it outputs the second line of my prompt twice.
I'm using urxvt.. I tested in xterm and it seems to work correctly, so I guess it's an issue with urxvt. My prompt code:
Code:
#!/bin/bash
function redblue {
local BLUE="[33[0;34m]"
local RED="[33[0;31m]"
local LIGHT_RED="[33[1;31m]"
[code]....
I changed the default SUSE prompt setting by modifying the shell variable PS1 to display the following information:
u : the username of the current user
h : the hostname up to the first '.'
w : the current working directory, with $HOME abbreviated with a tilde
I used export command to setup a new shell prompt:
export PS1="[u@h: w]$ " To add colors to the shell prompt and make a regular user prompt blue I used the following command syntax:export PS1="e[0;34m[u@h: w]$ e[m "
[Code]...
This is a really odd bug I can't seem to figure it out. Basically, commands like ls can see all the files in the current directory, however when I go to execute the file it will give errors like "file not found", even when it most obviously is. If you look at my command history in the screenshot, you can see I can ls into a directory and see it's contents. When I try to run the file, I get the "no such file or directory" error.
However, if I type simply 'vm', I can't use tab completion to complete the directory name, and my third command is me typing 'vm' and hitting tabtab, it lists a bunch of vmware specific tools instead of the subdirectory name. I can then ls and see my current directory contents, and it will list only the single subdirectory. However, then I tried to use the full filepath from root to run the file, still to no avail. If anyone has any insight,
Just tried to install a minimal F13 from the first CD. Picked minimal as the choice and it still asked for CD #1 and #2. I'll have to doublecheck if that can be averted by manually unchecking everything. However, a bit more disturbing--though that's annoying enough--was the fact that I, on a VM at least, couldn't get to a bash prompt during the anaconda installation. Is that normal now? Can anyone confirm or correct that on an actual hardware install, vs. a VM?
One used to be able to, with F5, or maybe F1, IIRC, get to, during a Fedora installation, a shell prompt, the way the vast majority of distributions do. I'm wondering if this is just an oddity due to the VM and possibly Fkeys not working properly, or something else that they've taken away from from Anaconda.
Is running a command in the Alt+F2 prompt possible in a bash script?I need this for a launcher for gnome-shell.For it I have written a little script to check if the process gnome-shell is alive and act accordingly.The script works fine, I just don't know how to write "debugexit" to the Alt+F2 prompt, as that is the only decent way I have found to shut gnome-shell down and going back to gdm desktop smoothly.
View 1 Replies View RelatedI tried following the example from here (http:url]......)Open up publicity.html for reading and writing by anyone.
Before: -rw-r--r-- publicity.html
Command: chmod og=rw publicity.html
After: -rw-rw-rw- publicity.html
Here's my terminal session:
username@ubuntu:/etc$ -rw-r--r-- bash.bashrc
-rw-r--r--: command not found
username@ubuntu:/etc$ chmod og=rw bash.bashrc[code]....
I'm trying to write a script to change the hostname of the computer at the first boot. The reason why I need this script is because I manage a number of training computer and I use Ghost to re-image it every 2 months. The script will read the mac address and the hostname from a csv file and compare it with the mac address on the current machine. I have stuck and don't know what is wrong as I'm new with script.
csv format:
Code:
00:11:22:33:44:55 host01
00:11:22:33:44:56 host02
script:
Code:
#!/bin/bash
# Description
# Change HOSTNAME for each machine from CSV file
#
# CSV File Format
# Each line contains two columns - mac address & hostname
# Description End .....
Is there any inbuilt functionality in Unix shell script so that i can able to convert lower case string input to an upper case? I dont want to use high level languages like java,python or perl for doing the job.
View 4 Replies View RelatedI downloaded a program called tonespace http://www.mucoder.net/en/tonespace/ which I extracted and then tried to execute the executable file with ./tonespace. This gives me the following message:
bash: ./tonespace: No such file or directory
When I use the command: file ./tonespace I get this: tonespace: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.15, stripped
I dont get it. The file is clearly there, yet when trying to execute it bash doesn't seem to recognize it.
It has permissions rwxr-xr-x and is not owned by root. Am I overlooking something?
I need some help recovering from a "slight" screwup. We just moved 3 TB of data from one RAID Array to another. Low lever archive files. This was done with a regular cp (for some reason) and now we have lost all the timestamps on the files, and we urgently need to get the timestamps back on these files.
We are running Ubuntu 9.10 Server and we have mounted the following
1. /mnt/old-raid ##Old raid from the old server
2. /mnt/new-raid ##New raid on the server
I know we can read out the timestamp on the old server using the command stat -c '%Y' <<filname>>
I know we can change the timestamp of the file, using the command touch -d '<<date>>'
To get from the stat -c date to the input date in touch we need to use date -d @<<timestamp>> +'%d %b %Y %R'
So my question is, how can I create a loop that will list all files in a folder, get their timestamp and update the old timestamp with the new?
Is it possible to change the GNOME desktop background during some period of time by just a random phrase from the list on black screen? Will is seriously load the CPU and consume battery life?
View 1 Replies View Related