If I log out of my initial login session, the login w/ username+password screen is *sometimes* shifted to the right (so that the power icon on the bottom right is off-screen, and I have a black column on the left). When I log back into an account, the same shift *sometimes* happens, independent of whether or not the login screen was shifted. User switching *sometimes* results in the same behavior (it's not just logging in and out).
I have also logged in using a different desktop manager (openbox), and have had no issues (so far) with shifted graphics. Logging back out from openbox, the login screen still *sometimes* has the shift.
When switching users or logging out and then back in, the unity desktop will be shifted to the right, so that the clock, power button, etc. is off-screen. This does not happen every time, but seems to be about 50% of the time.It looks to be shifted about the width of the toolbar on the left, so that there is a blank column the width of the toolbar, then the toolbar. So, maybe some screen position data is not being reset at log out
Just recently I noticed that I suddenly couldn't open any folders, just getting a message in my bar saying it was opening the folder, then it'd immediately close. I also could not right click on my desktop. I removed and then reinstalled Nautilus, then reboot, but now my problem has worsened.
I can no longer select a session type at the login screen, and after logging in I just get a small terminal window in the top left of my screen while the rest is the background for the gnome login screen.
I've been using ubuntu for months now and it was really frustrating dealing with hardware issues. Just when I thought everything's going ok, today, when I boot up, I am greeted by the following error: "Ubuntu is running in low-graphics mode your screen, graphics card, and input device settings could not be detected correctly, you will need to configure these yourself."
Selecting "run in low graphics mode for one session" doesn't work. It looks like it's loading something but nothing. I tried various options like "reconfigure X" and none of them works. I can login the console find though. I have a backup from a month ago but I've changed a lot since then.
After upgrading my netbook (Eee 1005HA) from Ubuntu Lucid to Maverick, I can log in okay, but it crashes back to the login screen a couple of minutes after logging in, after the desktop has loaded. I haven't been able to find anything in syslog/dmesg/etc. about why this is happening, but it isn't happening on my other laptop which I just upgraded to Maverick as well.
Edit: memtest86+ showed no errors and the live USB desktop works fine.
I have an Artigo A1100 which has the Chrome9 video. When I boot up the system on the Artigo I see the initial boot sequence, the Ubuntu logo and then when it is about to go to the desktop login screen the video goes completely scrambled. I can type in my login and password and I see the screen change as if it has logged in, but it is completely scrambled.
It almost reminds me of the problems old tv's had when the screen would start flipping because it wasn't dialed in just right. If I hit ALT+CTRL+F1 it will go to the command line interface and everything looks fine. it is the newest release of Ubuntu I downloaded yesterday and I know it works because I installed to a USB drive and everything works just fine when I boot off the drive using another computer of mine.
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
The above subject was one of the options I was given on the boot up of Ubuntu 11.04 (natty) after the message 'Your screen graphics card and input device could not be detected correctly'
I OK'd the message to run in low graphics mode.
The question is: What's causing this? I've had a look through previous posts with (apparently) the same problem, but the methods used were inconclusive, even though in some cases the problem was resolved.
Nvidia was mentioned - about deleting all references to it in Packet manager. Would this work? And if so, why?
This was one of the lines of an LSPCI command in terminal...
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1
Yesterday I downloaded 10.10 desktop version and burned an image to a CD. After installed to a Dell Dimension E510 machine successfully (I wiped out windows completely), the first update found 315 items to update. After downloaded, ubuntu asked to reboot the machine. Since then, the machine is stucking on the ubuntu startup screen. I suppose it is applying the updates; however, it has been over 12 hours. Is it normal to take that long?
Does anyone know how to install the Default KDE Desktop settings in an existing user? I copied a user's home directory from another Linux and when I added the user using adduser on the new intallation, it did not copy any of the Desktop or other .rc/.profile settings.
Is there a script that is run by adduser, or a list somewhere of the files that are needed for KDE Desktop to work correctly? Or, do I delete or rename certain files and then, what executable do I run to get the Desktop?
I am using 2 PCs, both running ubuntu. I want to connect via remote desktop (vnc, ssh -X, etc) form one to the other. However, what the solutions I found until now offer me, is the possibility to create a new desktop session and view that one (or run an application an view that one). I have an application running on the server, and I want to see that application, without needing to restart it or running it again in a new desktop. Is this possible?
If I let my computer sit for about 10 minutes, I lose all the windows I had open (gnome) and i get a message saying I'm running in low graphics mode. I have to restart X in low graphics mode to get it to work. i can't tell the difference, but as an avid writer, I often feel the need to get up and think about whatever I have open in oowriter.
I installed kubuntu few days back. By clicking blindly I lost my desktop - I mean it is working fine but there are no icons on the desktop and there is no task bar with list of programs.
How can I reset to the initial stage when i first installed?
I am trying Lucid on my eeepc 701, regular , not the Net Book Remix because i like having a desktop, and am mostly satisfied,except...when using certain programs (rythmbox for one) and particularly after switching up or down the size of the windows (ie the little arrows and boxes in the top left of window) i cannot press buttons on the window or in some cases close the window. the window moves about, up or down, when i click on it. this means i cannot press play or pause or exit the window and am forced to switch desktops and eventually restart.
I have been ordered to transfer my database running on oracle 10g on linux 32 bit OS to linux 64 bit. I need to know the advantages of 64 bit over 32 bit. Besides i would like to know if would face any difficulty while i migrate the database from 32 bit to 64 bit.
I am using ubuntu cli 10.04 for several different computers with different network cards, any time I plug in my persistent usb (ubuntu installed on usb) to computer the network would not work, when I find out what is up I see that it is up on next eth driver, I cant enter up to 50 or 100 or 500 entry there all the time and same thing with wireless since I use radius authentication its even makes it worse.
So to summarize: sudo vi /etc/network interfaces auto eth0 ifup dhcp iface eth0 inet ... ... ... auto eth100 ifup dhcp iface eht100 inet .... How to keep one entry for all those different computers (one for eth0 and one for wlan0)?
I'm running xubuntu 10.10 on an old toshiba P3 laptop and I'm very new to linux but am learning day by day. How can I either extend the login session or stop it auto logging me out as I want to leave a program running continuously. I've searched all over the web but can't find anything.
I downloaded the .ISO for Fedora Core 14 Live, with the intention of installing it to my HDD.
I burn the .ISO with no reported problems.
I boot to the installation CD and can get to the point where it asks me to Login (a timer is also going down for Automated Login).
Once I click "Login", nothing else ever happens.
I can hear the disc spinning in the drive and it's trying to load something, but it never does.
I thought that maybe my older (2003) laptop might just be slow, so I allowed it to do whatever it seemed to be doing overnight while I slept.
Well, I woke up this morning and it was still doing the same exact thing with no results.
---------- Post added at 05:54 PM ---------- Previous post was at 05:51 PM ----------
Oh, and I intend to dual-boot. I have already made a partition using Norton Partition Magic. It's NTFS filesystem for now, but I figured the Fedora Installation would give me an option to use that partition anyway - NTFS or not (meaning, it would wipe the NTFS file system and use whatever it is that Fedora Core uses). Am I mistaken in assuming this?
I need to shift the positional parameters of a script inside a function, but any call to "shift 1" inside a function shifts only the parameters of that function. Is there some way of accomplishing that? I tried another approach using an alias. The problem is that I have to take the result of the alias. So I call in my script:
Code:
var=$(shiftalias)
At first time, it works correctly, but after that it does not shift the parameters anymore.
I'm creating a new thread based on this post by batagy:
[URL]
Quote:
So I have running x11vnc as service without any problem (running on Solaris 10 and SLES10 too). I'm using the x11vnc's inbuilt "user chooser" screen (that little black screen), these command line options:
x11vnc -inetd -unixpw -users unixpw= -display WAIT:cmd=FINDCREATEDISPLAY-Xvnc.xdmcp -env X11VNC_CREATE_GEOM=1248x900 (plus a couple of other options that are not interesting here)
My question is related to the wanted VNC screen size. By default, I set the defauls screen size to 1248x900, as can be seen above.
Currently , when a user want to personalize his/her screen size to be started, he can do it this way: when the small black authentication window is appearing first, after his username, he's entering a colon, then specify the wanted resolution in this format: geom=1600x1200.
My question: is it possible somehow to set automatically the preferred screen size, without entering this ":geom=1600x1200" string in the authentication window? I mean to set it per user, without modifying the service options. I mean, for example setting the X11VNC_CREATE_GEOM or FD_GEOM variables in the user's home ".profile" for example?
I like very much the Guest Session feature of Karmic, it comes very handy when someone needs to use your computer. However, it's only available if I'm already logged in, it won't show this option at login screen. Is there any way to make this possible? Also, I once tried the guest session and configured its appearance to my taste. The next time I entered, though, the default desktop reappeared. I know this happens because no setting is permanently stored for this session, so the only solution I can think of is to change the default configuration it is loaded from.
Adding Firefox add-ons to Guest Session?I wanted to include Add-on to Ubuntu Guest Session Firefox.Is there a proper or better way to do this? Procedure I used was as follows
1. Login to Ubuntu to a user account with sudo privileges (later sudoer account).
1. Switch to Guest Session
2. Install relevant Add-ons
3. Check what the home folder of the Guest Session is. It should be something like /tmp/guest-home.xxxxxx where xxxxxx = six random characters.
4. Switch to sudoer account
5. Open terminal and type
Code:
gksudo nautilus
[code]....
I tested this with Flashblock and it seemed to work. I also admit that since I did the thing for the first time it was not that straight forward for me, but above procedure should work. With quick Googling I was unable to find straight forward method. There is a way to install Add-ons to all users from command line using -install-global-extension but this was not what I wanted to do. I wanted the Add-on just for the temporary guest account.
I am unable to change session type when not requiring passord on login.
How requiring password was changed:
System/Administration/Users and Groups Clicked on my User Clicked "Change" next to "Password: Asked on login" Checked the checkbox for "Don't ask for password on login" OK'd, everything
Please try this yourself as it might be hard to understand. But the option to change session type (ie: Gnome failsafe instead of reguar Gnome) is only visable along side with the password field.
Is it possible to make the session type setting visable without requiering password on login?
I learned how to do this on the 'net somewhere. This HowTo will help you create an account on the login screen that will log in the same guest-session seen in the user menu. The advantage of this is that it will be an easily accessible guest account, while not preserving any files or changes on logout, and a higher security model for the account. Confirmed to work on 10.04 - 10.10, but the directions are for 10.10
1. Under an existing administrator account, go to the menu entry System --> administration --> Users and Groups.
2. Click Add. you may need to provide a password at this point. Name your new user anything you would like, except guest. The account cannot be called guest, but visitor does nicely. encryption of the account is not needed. This account will be a "booster" account to guest-session.
3. On the next screen, enter a password, and make sure that you click the check box "Don't ask for password on login", Click OK to finish.
4. As an extra precaution, click Advanced settings, when back on the Users and Groups screen, and on the User Privileges tab, uncheck Monitor System Logs.
5. Exit the Users and groups menu, and then log out and into your new account.
6. Once there, make a folder called GuestManager, and in that folder, make a plain text file called Guestmanager.sh, with this code in it :
Code: #!/bin/bash # Launches the guest session /usr/share/gdm/guest-session/guest-session-launch # Logs the user when done /usr/bin/gnome-session-save --logout
7. Save that and then right click on it, go to properties, and then go to the permissions tab. On this tab, click "allow executing file as program", and then close that window.
8. Open the menu entry System --> Preferences --> Startup Applications, and once there, turn off all the startup applications, and then click add. Fill in the name and comment as GustManager, and for the command, enter /home/visitor/GuestManager/GuestManager.sh, where visitor would be the name you picked for the account in step 2. click add, then close
9. Delete all applets and extra toolbars (might want to leave the main gnome menu), and set the background to black or something else bland, and log out. Since this account is just a "booster" none of these toolbars and such will be needed, so removing them saves memory and load time.
i am wondering if it is possible to do this all i can find with google is idea proposals and brainstorms i know i could make a separate account and call it guest user bu that user would get to keep data/settings where as a guest session places a temporary account in the /tmp folder which combined with a ram disk for /tmp would result in some really fast performance since i use a ssd for / which would make the traditional hdd only used for /var also since /tmp would be a ram disk it would be like the guest is using a live cd with security restrictions and performance enhancements on top of this there would be no trace of the guest on my computer after shutdown
I am running Elementary OS Jupiter which is Ubuntu 10.10. When I get to my login screen, it does not have the bar at the bottom which lets me select my desktop session.
How do I get that back, or install it. Elementary OS comes like that, it is already disabled, I guess. How do I get it back?
I have successfully hosted eGroupware on my server and I am happy to having EGW its really very handy to use for my organisation.
But I have a problem when ever I want login into EGW, on top of the login window I am still getting 'Your session could not be verified' the error. I am really not understand why this is coming even my EGW is working perfectly as per my understanding. But I am sure may be I have done a mistake either time of installation or configuration.