My OS is Ubuntu net-book lucid linx (newest version not sure which) video card is intel chipset (made 2 years ago) I had just changed the graphics effects to extra and reboot. To my surprise the entire screen is flickering and even though I "can" login the menu doesn't appear and I continue to experience rapid flickering I do have a ubuntu DVD
View 3 Replies
I contacted the computer manufacturer, and I am under warranty, but it will take forever to get a new battery.
I tried recalibrating it, and updating the BIOS, and still NOTHING.
Why? It was working before...
Any ideas or solutions...
It stinks because I can only get like 1 hour battery on this thing now...
Ubuntu no longer boots up on my Archos 10 netbook, it's been working fine for the whole month I've had it but now it simply sticks to the Ubuntu loading screen and doesn't progress further. Windows still boots fine so my guess is it's not a hard drive failure that's causing it.
View 5 Replies View RelatedI used unetbootin to make a bootable usb with PeppermintOs and then reset the BIOS to boot from 'removable'.
It would not boot - went straight to the (grub?) menu offering mint, and mint safe recovery which is from the hard drive.
First USB did not work, so bought a new one (4gb) and that did not work so borrowed a 1GB from a colleague. This did not work either.
I have tried two different ISOs (having done the MD5sum on them as directed).
I have tried fat 32 and ext formats (using gparted to format it as I don't know any other way) and from there I can see that it says boot, lda).
When I disabled HDD from BIOS, the USB was read but then the message was that no boot device found, replace with proper boot device.
I also tried using the start-up disc creator.
Each time I have tried it on my desktop PC too, having set up the BIOS and I haven't been able to boot with them there either. I know that the netbook will boot from USB as that is how Mint 9 got installed on it.
In desperation I even tried creating the USB from windows. Even that didn't work.
Whilst I have a working copy of MInt 9 on the netbook, this is not vital, but I so want to try peppermintOS on it.
Well, it's a long story, but to make it short I foolishly upgraded my wife's netbook many months ago to 10.04, not knowing that the new xserver version will cause me lots of grief with the gma500 driver. Back then, I ran an update that completely borked my system, and my only fix was to do another clean install. Since the, I just did not do any more upgrades.
So, months have gone by, and the netbook has not had any upgrades. I've read some instructions in the gma500 megathread on how to safely upgrade the system. To start, I had to purge the psb-kernel-source, do upgrades, and reinstall the psb-kernel-source and the other poulsbo drivers. I did all that, and now it boots to a black screen. I can't ctrl-alt-f1 to a terminal session either.
I really don't want to do another clean install. With the crappy broadcom driver as well, it's a real chore. And because of the crappy broadcom driver, I can't figure any way to get a wifi connection from the command line either.
I actually have it installed on two of my computers. One is an older Acer Aspire 3100 that dual-boots windows 7 and Ubuntu 11.04, and an Acer Aspire ONE that has Ubuntu 11.04 as main OS. Before Ubuntu, (even currently) I'm a MAC user, and i'm really liking Ubuntu. On my 3100 it works just fine except the screen flicker on wake, but a quick reboot will solve that.
On my Aspire ONE i've had to re-install ubuntu multiple times. (we're talking 5 or 6 in the last month) Sometimes, it'll boot up to absolutely nothing. One time I got a weird error message everytime it booted. The last install froze up a lot, and eventually would only start to boot into setup. I reinstalled Ubuntu, again and it worked until I shut it off. Boot back up, same thing. Threw me right into setup. I was able to get around it after 5 or so tries of rebooting, hitting ALT F11 and somehow got into ubuntu recovery, but loaded normally. I'm using it now and it's working great currently.
Specs on the ONE
1.5GB Ram
8GB SSD (could this be the culprit?)
ATOM (1.8 or 1.6) GHz Processor.
Halfway through this fiasco, I put windows XP on it and used it solid for 3 days without any of the mentioned above issues.
Sometimes (not always, mind you), several applications, lag. A lot. For instance, Blender 3D is entirely unusable and don't get me started on Fallout 3. Other examples include Minecraft (Not the Windows .exe but the .jar) and XMoto. So I assume it has something to do with the graphics driver or the likes. For some reason, Compiz still works fine. The only way I can fix those lags is to reset X, which is not exactly a good way, especially because this happens to shut down uShare and thus cancels my movie stream. So..
For support reasons, here's my setup:
CPU: Intel Core 2 Duo E4500 (2*2,2GHz)
Graphics: Nvidia Geforge 8600GT, 512 MB
2 GB RAM
500 GB HDD (The Maverick partition is 159 GB, 2 GB Swap)
Some hama WiFi-Stick
ForteMedia something something audio card
my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
My mouse and trackpad button control is severely impaired in 11.3, KDE 4.5.1 (or .2) using Compiz. Gnome works fine. XFCE has some problems. The mouse control of window features is sometimes limited to one window with the rest of the desktop not responding to mouse actions. Popping up a second window from an app causes the mouse control to be completely lost. The issue leaves KDE effectively broken having only keyboard control. With some ESC key hits and using right mouse button to close one app (from the panel), I can move focus to another app but mouse control within the app is non-existent. Moving windows or raising or lowering doesn't work either. Sometimes, the GUI captures the mouse click but does not recognize the active App and applies it to objects sitting on the desktop screen underneath.
I've reverted partially back to the 11.3 installation DVD then reload updates and then moved to stable release of 4.5, then went back to the 4.5 factory. All failed to correct the problem. I removed .kde/.kde4 files and this did not help. What is wrong with my system? Also installed the latest kernel of the repos then reverted back to 2.6.34.7-0.3 [x64]. [very frustrating, been using Suse/KDE for >7 yrs, this one has me stumped]
I am not sure of which LibreOffice version I am using because I can't open the ****ed program. So here's what's happening: I start LibreOffice, my screen looks unusual (it tiles a section of the screen that is the same size as the LibreOffice window (I think) across both of my monitors) and my system locks up. I am unable to use Ctrl+Alt+Backspace, Ctrl+Alt+Delete, Ctrl+Alt+F1-F8, or any other keyboard combination. No mouse click registers and the cursor acts as if the mouse is in one location (if the system locked up with my cursor over a link, the cursor stays like that) BUT the mouse still moves. Also, if I am playing music when it locks up, I can continue to hear the music and the music continues to shuffle through my playlist.
I am able to access my machine normally through ssh and the only way I've been able to fix this is to hold down the power button or pull the power. I have not identified what action causes the system to lock up, the only thing I've noticed is that LibreOffice is open every time this happens (It's happened no matter if Writer or Calc is open). The system almost always locks up upon startup of LibreOffice if the recovery window pops up, otherwise it locks up at some point during my LibreOffice session no matter what. I have not touched LibreOffice on my other machine's openSUSE installation, so I don't know how reproducible the problem is. Let me know if you need any extra information or if there are any diagnostic commands I could run.
Running Ubuntu 8.04LTS at present. (hyperthreaded 3.06 with 2gb ram)
Have Logitech 9000 web cam .. brand new out of the box.
It installed and works both in Cheese and in Skype. (outstanding image!)
But, there is a severe lag in the image (audio does NOT lag .. so makes using any on line VERY hard to do!) Is there some way to get this thing to work properly, or am I going to have to wait on 10.04 to see if that works? (hate to use the old saw of "it works in Windows", but it DOES on my Windows machine .. just that I want it to work on the Linux box as that is my primary box and used for almost all on line activities.)
I was running Debian Etch for a while and upgraded to Debian Lenny months ago. After the upgrade I began to notice that I was losing time pretty severely on the desktop clock (On the order of more than 1 second every minute!).I recently noticed an online game lagging exactly every 5 minutes and finally pinpointed it to this timekeeping script I wrote. I would like to fix the time drift issue on this PC properly now but have not found any helpful documentation online yet.
View 14 Replies View Relatedwith the same router, same ISP, same connection basically, on Fedora I'm getting on a maximum of 60 mbps. I also get moments where no pages will load, but network manager will report that nothing is wrong and that the connection is 100%.
View 13 Replies View RelatedI am running Linux Mint Isadora 9 and recently installed a wireless USB adapter. After installing RT3070 drivers for my RT2070 card I got everything working and life was good. Now, all of the sudden I am having a world of problems connecting to the internet. I can connect to my AP fine, but I cannot access the internet. If I attempt to ping my AP by IP address I get severe packet loss. I cannot ping my AP by url [URL] at all so Im guessing there are some DNS issues as well.
Code:
poe jk # lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:c045 Logitech, Inc. Optical Mouse
Bus 003 Device 002: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard
[code].....
we bought a dual 12-core Opteron machine (Supermicro H8DGi board). Installed Slackware 13.37 and performed some few tests. We observed that performance quickly degraded as the box became loaded. For instance, a lonely task may took "t", but when running 24 of them at the same time (fully loaded box), it may took 2 to 3 times longer. From some test we did (tinkering with BIOS, moving memory modules, etc) we came to the conclusion the problem was due to a terrible memory managment. Finally we solved the problem by recompiling the kernel and taking the .config file from OpenSuse. Thus, there must be something to be tweaked in the standard Slackware .config file
View 8 Replies View RelatedI'm disappointed because I installed jdeveloper 11114 , I mean the .bin file, whoch I ran successfully, but when I launch jdeveloper there is a redraw bug, the toolbar is not displayed successfully, and the components of the menu and of the toolbar appear and disappear when I hover it with the mouse.
any idea which would allow me to use this tool?
I am having trouble installing Ubuntu 10.10 netbook remix edition onto a Acer Aspire one netbook. I am attempting to install the OS from a 16GB PNY usb drive w/ the usb-universal installer and ubuntu 10.10 netbook remix .ISO
The reoccurring problem that I am encountering is that when I boot from the USB-drive and begin to install everything seems to be working, and then it is stuck at the menu where it asks who are you?; and of course i have filled in everything asked and at the bottom where you can look at what its doing in the terminal/detail section all it says is ready when you are, and the forward tap is unselectable.
Why i cant change from 800x480 to 1024x600, that this model of EEE pc doesnt support anything higher than 800x480 at the 10:1 ratio...
Firstly my question is, is it ACTUALLY possible to 'overclock' this type of netbook to run a higher res?
Im running ubtuntu netbook remix 10.04 and am new to linux (again, so sorry) so be nice, and ive tried getting my head around this 'sudo' stuff, and the xorg.conf file (which is nowhere to be found) and ive even tried a program calld astray but im pretty sure ive exhausted my patience as trying to self-teach . . .
And ive also tried to much around with xrandr or whatever that command was.. but i cant really get my head around it, and it kept telling me the resolution didnt exist ect...
For the past 2hrs I have been struggling to make KDE launch plasma-dekstop instead of plasma-netbook, but all in vain.I removed, then purged plasma-netbook and plasma-netbook-default-settings packages but after logging out and re-logging in the Netbook UI was back! After restarting the system now I can't even seem to get the KDM. I am greeted with a black screen.--- I restarted the system again and the nasty little bugger is back again! This is so frustrating. How do I get plasma-desktop to load instead?---- Great now I can see that plasma-desktop and plasma-netbook both are running simultaneously! netbook on top of desktop. So my final Q is how do I stop plasma-netbook from loading?
View 9 Replies View Relatedi would like to change my OS to Ubuntu netbook remix, but I already have installed Kubuntu netbook package.
Is there any easy way to make switch from Kubuntu to Ubuntu? Without need to delete all my data?
I installed Ubuntu Netbook 10.04 and immediately noticed the keyboard of my eeepc 1000HE was abnormally warm. Since I dual boot XP I booted to XP and found the fan running faster to compensate for the previous heat. This did not happen on Ubuntu-the fan just was barely running. I had to place the side of the netbook in order to feel the fan running. I issued "sensors" in terminal and it showed 67 degrees C for the cpu temp. Is the latest Ubuntu such a resource hug that it heats up the CPU?
View 9 Replies View Relatedmy play on linux wont work i go to download a game and it just freezes then it asks me to force quit or wait is because of the computer im using a netbook nb305 toshiba with a intel atom processor with ubuntu netbook os?
View 14 Replies View Relatedonly certain games are doing this, I haven't seen any other kind of flash have problems
Everything works for a while, then after a few minutes there start to be flickers of boxes, some of them colored, some black
they are only on the screen for about one minute, and only in the frame of the game
Recently i've installed 10.10 and have a problem with flickering screen on VGA. I have 64-bit release, ge force 210, nvidia propietary drivers and two monitors:
- AOC_1920*1080_60_DVI
- Philips_1280*1024_75_VGA
- nvidia-current, 260.19.12, 2.6.35-22-generic, x86_64: installed
No matter which monitor is attached to VGA, it flickers randomly every couple of minutes. Sometimes it flickers when i use mouse or keyboard, but sometimes it flickers by itself.
I don't know if this has been asked already, but I cant seem to find it anywhere. I have a gateway, p 7915u with an nvidia 260gtx graphics card. im trying to install ubuntu 9.10 64-bit on it but the screen keeps flickering before I can even install it or try without change.
View 2 Replies View RelatedWhenever i close and then open the lid of my Compaq nc6220 laptop the screen will flicker when actions are made like moving the mouse, opening a program or typing. This is a known problem for the Intel 915 card and the solution is to disable the RANDR process. The thing is i cannot get to the service managaer and the RANDR doesnt come up in BUM which i installed. Does anyone know how to disable RANDR or any other solutions to this very annoying problem?
View 4 Replies View RelatedI have flash player 10 but some application flickering and don't get draw correctly.
View 3 Replies View RelatedI had 10.10 installed and decided to chance it by upgrading to the Alpha release 11.04.Graphic card is ATI Sapphire X1550 I think (512MB).Apart from trying to get used to the buggy interface (to be expected from the alpha), the screen keeps blinking, goes black for a second every 30 seconds.
View 3 Replies View RelatedWhen I first boot up it gets to the checking sensors, then freezes and the screen flickers all the time. I have to do a hard shutdown then when I turn the computer back on everything works normally in fact the boot time is greatly reduced! And so far the system has worked fine after the 2nd boot.Anyone had anything similar?
View 2 Replies View RelatedI just installed Mythbuntu on my old laptop (lenovo with on board graphics card). I have now the problem that when I connect the TV out to my TV the picture is flickering. It looks like the image is sometimes jumping to the left or right for a fraction of a second. This usually happens when the image is not still, ie I scroll the menue or a movie is playing. I already tried different display settings but that didn't help.
View 4 Replies View Related
