I thought anything mounted to /media would appear on the desktop?mount /dev/sdb1 /media/datadoes mount sdb1... files are available in Terminal. But there is no icon on the desktop. Why? What do I need to do to get a desktop icon?
View 5 RepliesFor some strange reason, my media mounted in /media is not showing on my desktop on Lucid (10.04).I've been through gconf-editor to make sure the box is checked to show the mounted media in Nautilus. I also checked the options to show my Home folder and Computer icons on the desktop, but these do not show either.Tried ubuntu-tweaks to see if it would work, but no go there either.
View 1 Replies View RelatedI have two external hard drives mounted to my computer. They both work and are accessible. The one shows up on my desktop when it is mounted just fine. The other one does not. I went in to Configuration editor-apps-nautilus-desktop and checked the volumes_visible. That makes the other one not visible/visible but not the one I am having problems with. I read somewhere that devices must be named for it to show up and both devices are named, I even changed the name and that didn't do anything. Again, this device shows up in my computer but not on my desktop like all my other devices do. If anyone has any ideas on how I can get this external hard drive to show up.
View 1 Replies View RelatedI have a bit unusual request.
There are three partitions on my hard drive. Two of them were assigned to mount points / and /home during system installation. The third one was left intact.
After installation the first two partitions were automatically integrated into directory tree and there was a shortcut on the Nautilus sidebar for the third one. Then, I registered the third partition in /etc/fstab for automounting at /home/user/Data directory. For now it works fine, the volume is mounted on startup. But I still have the shortcut to this volume in Nautilus sidebar and icon on my Desktop.
I am interested, if it is possible to disable showing of this items on Desktop and in Nautilus to make the third partition look like registered at system setup time.
I'm totally new with linux and Ubuntu. I've just installed 10.10 yesterday and since then it's been an uphill struggle These forums has helped me out quite a bit already so I hope you can continue doing it with this problem I have.I got a single drive where the bootpartition is ext4 and the other "storage" partition is a remenant from a windows 7 installation I had, with NTFS. Decided I wanted to give Ubuntu a try! Now i've run into permission trouble though, mainly because I wanted to set up an FTP server (oh what a struggle THAT's been, I have some stories... ). I've done a "mount --bind" so that I can reach different resources directly from my chroot. It turns out though that the mounted partition isn't giving anyone except the owner (me) permission to see the resources. FTPing into the server gives the mount points but gives a 550 error and can't list anything inside of them.It works perfectly for me just running it at the prompt or using the mount points directly in the Ubuntu GUI though (since I'm the owner/admin/whatever).
My intended solution that I've found was that people with NTFS drives did a few magic tricks with the line of text in Fstab so they could access their NTFS drives. Problem for me is that my sda3 mount isn't showing up at all in fstab, even though fstab is supposed to (as far as I know) show all mounted devices on there. All the while, I have my sda3 totally accessible from /media/Storage/. Any pointers as to why this is?After I installed Ubuntu, I just mounted the sda3 with the Disk Utility from System->Administation and didn't think much of it afterwards until now.What's the best course of action here? remount the ntfs partiton using fstab? Convert the ntfs partition into an ext4? I have a lot of data on there I want to keep as well.
This is probably me looking but not seeing an option somewhere. I re-installed 10.10 over 10.04 by formatting the root partition but keeping the home partition the same, to save me a lot of work. (64 bit) However, now when I mount a CD, DVD or USB stick, they don't appear in Dophin's "Places" window. What have I missed please?
View 2 Replies View RelatedI'm having a problem accessing files via nfs where an iso has been mounted through the loop device on the nfs server. Basically what I am attempting to do is access the 6 CentOS 5.2 ISO's via NFS from one of my client machines. The client is able to mount the share and see its sub directories leading up to the mount point of the ISO, but the contents of the mounted ISO image are simply not visible (on the client, they are visible on the server).
Server config (CentOS 5):
/etc/fstab:
/home/user/iso/CentOS-5.2-x86_64-bin-1of7.iso /exportiso/centos/x64/5.2/disc1 iso9660 defaults,loop 0 0
[code].....
NFS is working correctly for other mounts between these two boxes, however.
I accidentally deleted a system directory so I had to reinstall. I reinstalled, and setup my users again in the same way. When I tried to copy my user files from a saved source, they now appear on the desktop in mass. What I expect is that only files in the Desktop directory show on the desktop, instead all files in the home directory show on the desktop, less the dot files. I can not figure out how the system controls what files show up on the desktop. Comparing the problem user to a working user failed to disclose the difference.
View 7 Replies View RelatedI have installed Xubuntu on an old laptop which has a floppy disk.
On the desktop where mounted drives will normally appear, it constantly shows the floppy disk on the desktop even though there is not floppy inside, so I have disabled the desktop from showing mounted drives, however now anything else like a CD or USB drive will not show up on the desktop. Is there a way to choose what types of devices are shown on the desktop?
I have considered disabling the floppy from the BIOS(assuming that is possible), but I would rather not go down that road just yet.
i m mounting one ext4 partition onto some folder inside /home, have added things on fstab but now i dont want this thing to be listed on the desktop or on the places menu. i m using karmic.i have checked gconf-edit but
View 2 Replies View RelatedI set my fstab to auto mount one of my partitions in ~/Music.It works perfectly, but there is always the icon in the desktop pointing to my partition with the name "40 GB FileSystem". The idea behind mounting it automatically to ~./Music was for the partition to be transparent to me...Is there a way to remove that icon from the desktop and from the Places menu?
View 9 Replies View RelatedI've some icons of mounted devices on my desktop. I want to display only some of them which I need. All drives are mounted automatically while booting or by scripts while logging in.For example: I've 4 mounted devices and 4 icons on my desktop and I want to have 4 mounted devices but only 2 icons.There is possibility of hiding all of icons in gconf, but I want to hide only some of them.Is it possible?
View 4 Replies View Relatedi had the problem of mounting the windows drives on to Debian OS. i got it fixed with some help.now i can access it from COMPUTER. BUT my all Windows Drives (C,D..)are also seen on my Desktop.(with computer,home, trash C,D......)can it be made invisible/Not on the desktop?
View 1 Replies View RelatedI recently installed kde using
Code:
apt-get install kubuntu-desktop
and I love it. However, in GNOME, it shows all the usb drives and cds you have in on the desktop. The kde desktop doesn't do this, and I'm wondering if there's a way to make it so. I googled around, but couldn't find anything.
I recently changed linux distros and switched to Karmic. In my earlier setup /home was on a separate partition.
After switching to karmic I added the following line to /etc/fstab to mount my /home partition which was on /dev/sda6 (ubuntu is on /dev/sda7) /dev/sda6 /home ext3 nodev,nosuid 0 2
After rebooting I saw that while earlier I had an empty desktop now my desktop shows the content of my home folder.
On googling I found out about how I could change the nautilus preferences.
I used gconf-editor to change: apps>nautlius>preferences>desktop_is_home_dir to false
I also changed: apps>nautlius>desktop>volumes_visible to false.
However on rebooting I still see all the contents of my home folder on the desktop.
What do I need to do to show the Desktop as blank (as in point to ~/Desktop rather than point to ~)?
I am using Ubuntu 10.04 x86_64. I log in to the machine using nfs. For a problem with mounting my home directory, I had to copy all the contents of my home directory (including all configuration files) from a recent snapshot on to itself. That is, I did something like,
Code:
cp -r /home/user/user /home/user
All of my recent data and program configurations were in /home/user/user. So after the copy operation, I logged out and logged back in again to see that all my configuration and data was restored to what I wanted. But the problem is that now on my desktop I see hundreds of mounted volumes. These are coming from an hourly/weekly snapshot program. The tech support guys for my lab have suggested copying all relevant data to a backup and then deleting the home directory altogether. But I don't want to configure all programs all over again. I think I should be able to get rid of the problem by editing/deleting one or more desktop configuration files. I just don't know which ones. I tried looking around the gconf-editor but was overwhelmed at the amount of information on there.
I have suddenly lost the desktop icon (of a hard drive) for a mounted network share. It is funny because, I have other network mounts which share the same server, and there icons are appearing, and this particular share just does not show up with the icon, even if I try mounting it different locations in the filesystem. Any ideas. I really like those cute icons on my desktop.
View 1 Replies View Related10.04 LTS: Is there a way to hide an icon of a mounted file system from the GNOME desktop?
View 8 Replies View RelatedUbuntu desktop is not showing up. How to fix this issue? refer to attached screen shot.
View 1 Replies View Relatedok so i clicked the desktop cube option in ccsm and it disabled some things that unity needed or something and it messed everything up (grey streaks across screen where top bar and launcher had been). so clicked to set everything back to default although nothing happened except for the streaks went away and i was left with just my desktop bg and the items on it. restarted same thing..
only got onto the browser to post this by looking through the help menu for a link to the Internet lol.
ps. no shortcuts work so no terminal line. but i could always make a launcher on the desktop if theres a comand to set everything straight
I have ubuntu 8.04 LTS. I install Rtai-lab and I make kernel configuration.
Linux-2.6.28.7
My configuration is ok everything is good when I reboot my system then I go to ubuntu kernel 2.6.28.7. I put user name and password.but there have some problem. When I put user name and password after my desktop is block. I can move the mouse pointer but my desktop is not appearing.
I just updated today my ubuntu from 10.04 to 10.10. All worked ok until I rebooted my computer. After that, it showed me the terminal window instead of the desktop environment i had. I tried to reinstall ubuntu_desktop, but nothing.
View 2 Replies View RelatedI mount the shared drives (on a Windows Server 2003) and I can access them from my home directory. Everything is mostly fine. But I also get desktop icons for the shared drives, which I don't like since I prefer a bare desktop. Sometimes I have deleted desktop icons from /usr/share/dist/... but these are not there.
View 1 Replies View RelatedI am using Ubuntu 9.10, and is the only OS installed on my system. Yesterday, my desktop stopped working - no right-click function / display of icons. My wallpaper was still intact. The last thing I did was pressed ALT + F2 and executed "gksudo nautilus". This fixed my desktop for the time being, but wasn't showing the correct icons/wallpaper.The real problem started when I restarted. I get the normal login screen, and when I enter my info, it just restarts back to the login screen. I know I am entering the correct information, my caps lock isn't on etc. If I enter my password incorrectly it doesn't reload, it just acts normal and says the pw was wrong. Only when I enter my info correctly does it go to a black screen really quick, then come back to the boot screen.
I am at work right now, but will be checking this thread again later tonight. Please help, I am locked out of my computer which I desperately need to log in to!
I have an Ubuntu 8.04 machine, I have a NFS drive being mounted when the system starts up. The entry in /etc/fstab looks like:Code:server:/srv/Pictures /mnt/share nfs rw,hard,intr 0 0The drive is mounting fine, but I would really like it if the icon did not show up on the desktop for this drive.Is there anyway to keep it from showing?
View 3 Replies View Relatedif i save a picture to my desktop it isn't showing as a picture just as a jpg file . how can i get the pictures to show in the icon
View 6 Replies View RelatedI am the latest stable Ubuntu (10.10) on an Asus netbook and have both GNOME an XFCE installed. I started with Gnome and than installed XFCE because it works slightly faster on that slow computer. In the beginning everything was fine, but at some point. I don't know when (but it was so also when I was running ubuntu 9.10, before I upgraded to 10). This is what started to happen: when I log in and choose XFCE, I first see my XFCE desktop.
Then it flickers back and forth between my XFCE and Gnome desktop (but the top panel remains the XFCE one), and eventually it settles on the GNOME desktop (which has its own color, different icons in different positions, and its own context menus). The general desktop environment is XFCE: the desktop panel and the itmes on it are XFCE, but the desktop area itself is my GNOME desktop. What I can do to get rid of the display of the GNOME desktop when I choose to use XFCE?
install of Win7 Pro x64 and I have VirtualBox installed with Ubuntu 10.04 running as a guest OS. I want to get access to the tty1 so I press CTRL + ALT + F1. The screen resizes to a smaller size, turns black, then the gnome desktop reappears but only the top left corner.
View 4 Replies View RelatedToday I uninstalled Zimbra desktop from my Ubuntu 10.04. After doing it, I am facing several problems due to changes in system configuration.
My Home Folder contents are shown on Desktop and if I delete them from Desktop, they are also deleted from the Home Folder. I don't understand why this is happening.
Also, from the side pane in Explorer, the option of Home Folder is not present any more. When ever I go to Home Folder, on the side pane is shows that I am on desktop and the location bar shows that I am in Home Folder.
For the past few days my file associations have gone for a toss. For example : an icon on the desktop to open eclipse says eclipse.desktop and doesn't show the eclipse image when i right click a .bz2 file it doesn't show the extract here option for text files, a small bit of the text is showing outside the icon where it usually shows inside The same problems are present in nautilus as well as the desktop.
Need some quick help to reset these to the default.
Have attached a screenshot to show the issue.