I am running Ubuntu 10.04 beta 1 in vmware on Windows 7, and when I installed the latest updates, everything was working allright except for my keyboard. When I click outside the keyboard works in Windows, but not in ubuntu.
View 1 RepliesI just want to be able to copy the files from a cd that is only compatible with windows to and new cd that is compatible with ubuntu
View 9 Replies View RelatedI would like to make a keyboard shortcut to execute the following command:
Code: /usr/bin/xdotool key XF86MonBrightnessDown The command, when run from a terminal, works perfectly. However, when run via a keyboard shortcut, the command fails to execute. how I can execute my command with a keyboard shortcut. I am running Ubuntu 10.10 Netbook Edition with Unity-2d.
I've been using Xfce for some time now, but I'd like to return to fluxbox or trying fwm.
The problem is that the keyboard only works in Xfce or in Kde, in my system Slackware64 13.1.
What should I do to have it working in all window managers that come along the distribution?
I've had Ubuntu 9.10 x64 installed on my Asus G60JX-RBBX05 Laptop for a few weeks now, and for the most part its been working pretty well.Then a couple of days ago, I suddenly noticed I could no longer use the numeric keypad. This seemed completely out of the blue, but its possible I received an automatic Update through the Update Manager that hosed it or something. I'm really not sure.Has anyone had a similar experience
View 7 Replies View RelatedMy keyboard has suddenly stopped working in Gnome (Ubuntu 10.4 LTS, Toshiba satellite laptop, P300). It works fine to logon, and with KDE.
The last thing I did before it stopped working was to hold down a shift key for too long, while I was thinking about what I wanted to do. The 'sticky keys' prompt popped up, which I killed. After that the keyboard has died - in *all* applications (e.g. gedit, terminal etc.)
The mouse still works. If I logout of Gnome, it comes alive again to type in the logon password. I had a look in messages, but without any enlightenment.
Hey folks. I'm not sure how to describe this properly but periodically Kubuntu 11.04 will stop responding to my mouse and keyboard EXCEPT that Plasma, or what I assume is Plasma, still responds to mouse events. I can launch and exit the desktop cube and desktop grid but can't access my panels or any application controls. The only fix I've found is to do a hard power cycle.
Does this behavior ring any bells for anyone? This is the last hurdle I've got between me and using Kubuntu 11.04 full time on my Samsung RV515.
I have new install of 11.4 X86_64 which has been working fine up until this morning. Now when I boot and get the kdm login screen, the keyboardis no longer working, nothing appears from typing, no key sequences are recognized. The mouse works fine and when I go Console Login, the keyboard works fine.The mouse and keyboard are both Logictech wireless using the Logitech unifying usb link. As I said, it was working fine until this morning.I have no idea how to even diagnose this.
View 8 Replies View RelatedI'm trying to net install Wheezy on an Abit IC7-G PIV system. I tried this months ago but the problem still exists. This is not so much an installation problem but after installation when it boots, I lose PS/2 mouse, PS/2 keyboard and network. I get:
startpar. service(s) returned failure udev ... failed I can plug USB mouse and keyboard in after this failure which then works. There is nothing wrong with the hardware. It works fine on other systems. Squeeze works perfectly.
i'm using ubuntu since 8.04, and the current (9.10) is a fresh install on new hdd.the problem was the same each version (8.04, 8.10, 9.04, 9.10) - while i'm playing the video (no matter if i use mplayer [smplayer], gstreamer [totem] or adobe flash plugin [videos]) the playback freezes randomly for about 5-10 sec. during the freeze the movie is still played, i can hear the sound is ok. if i press [space] in smplayer it pauses the playback, so the responses for keyboard actions are ok. not for the mouse clicks however. i can still move the cursor around the screen but it seems the system is not aware of it (clicking on the "pause" button doesnt pause the movie). except the cursor, nothing changes on the screen (if the im [pidgin] window was blinking because of new message, it freezes etc etc).
is there any kind of log i could look into just to try figuring out the problem?it is impossible to watch any movie on my pc (currently i don't have tv)i installed windows on external hdd once and it played videos fine so i suppose it's not hardware problem .
I installed virtualbox a couple of days ago and had used Windows 7 (guest) multiple times without anproblems. However, upon attempting to share folders, it will no longer boot and I get this error:
p, li { white-space: pre-wrap; } "Failed to open a session for the virtual machine Windows 7.
The virtual machine 'Windows 7' has terminated unexpectedly during startup with exit code 1."
Details:
[code]....
I have an Acer Aspire One D255E netbook dual-booting Win7 and Kubuntu Natty, and basically the inbuilt microphone works in Windows but not in Kubuntu. I've tried running alsamixer, it's not muted. I installed pavucontrol and under input devices there are 2 options: Analogue Input and Analogue Microphone. Both of them show the volume level hovering round about nothing. But slightly above, so I dunno, noise I guess.
View 9 Replies View RelatedI've only installed Ubuntu 10.04 Server yesterday, and it was the first time I had ever used it. As far and I can tell I have my Apache server up and running. When I go to localhost I get the 'It works!' page.
I tried checking my port in Windows, after I have Xampp loaded up, it says the port is working fine, and the site loads up properly, which leads me to believe the problem not in my router.
I've installed ddclient and put the proper information in as far as I can see but it still doesn't work. I've been testing my port here: [url]
And here is what I have in my ddclient.conf:
I've just installed Ubuntu and it seems the sound isnt working in it. Anyway - i have two screens. One is a tv and i want the sound to come out of there(its running through a hdmi cable).Works completely fine in windows. I havn't installed nivada plugin thingy as it stops my dual monitors working =(. So maybe this is the problem? From what i remember it worked in wubi though (without nivada drivers)I followed the troubleshoot and couldn't seem to find anything wrong?
View 5 Replies View RelatedMy Windows machine can ping Ubuntu by name, but Ubuntu can only ping the Windows machine by using it's IP address. This was working fine in both directions until I purged Samba. After purging Samba, I couldn't ping in either direction unless I used the IP address. I did some reading and found that Samba provides NetBIOS functionality that allows the machines to resolve host names without a DNS. Since I'm not running a local DNS, I decided to reinstall Samba. Unfortunately, I've not been able to restore it to full working condition. I don't want to use hosts files as all the IP addresses are assigned automatically by DHCP. I want to be able to access the Windows machine by name.
View 9 Replies View RelatedI have a Linksys WRT54GS and use grub to dual boot a Win7/Ubuntu 10.10 setup. The PC is jacked directly into the router, not using wireless, and only seems to connect to the net when I'm using Ubuntu! To make matters more interesting, my Dell Mini 9 with Ubuntu 10.4 remix and my fiances 2011 Macbook Pro (OSX) work just fine right now with wireless and wired connections to the same router, respectively. Thoughts? Still sort of a noob to Ubuntu, rarely post on the forums since most things are already asked, but I can provide more information if necessary.
View 2 Replies View RelatedAs the title says I have done the stupid mistake of changing the name of two partitions (the main for the W7 and another just for documents), I did not change the name of the Ubuntu 11 partition. I used the Computer Management from windows to do the changing. Now nothing works, it does not find the Grub to initiate or a not even gives me the menu to choose the windows. When you change the name does it change the drive letter? Couldn't understand why this happen.
View 3 Replies View RelatedWe just set up a vpn & samba server and are running into this problem.
we can log into the vpn and can ssh, http, ftp in the various servers on the internal network. however when trying to view Samba/Windows shares over any windows machine, they fail to connect. BUT we can vpn in on any android device and using a samba app view the Samba & Windows shares on any server we try.
If im logged in the network internally, there does not seem to be a problem. Only if we VPN in from the outside.
a customer is running an old DOS application to run their business using windows 98/XP workstations that run the DOS app. I configured a Redhat 7.1 samba server (with fault tolerant backup server) for them back in the early 2000s & its version of Samba 2.2, I eventually made it work with all of their systems for printing & secure file sharing ("secure" for them anyway). Fast forward to 2011 & they would like to replace the aging Redhat servers with Ubuntu 10.10. So I set that up & got the following components working with the default install + patches of Ubuntu (using apt-get install samba): Windows XP: 1.) Password protected share access. 2.) Can browse Samba from Network Neighborhood.
3.) Print from XP Windows to HP network printer through Samba. 4.) Print from XP DOS terminal to HP network printer through Samba. XP is pretty much ready to go. Now, Windows 98: 1.) Password protected share access. 2.) Can browse Samba from Network Neighborhood. (this was tough!). 3.) Print from XP Windows to HP network printer through Samba. Note: CANNOT Print from Windows 98 DOS terminal to HP network printer through Samba! When I setup the LPT1 from net use on DOS to point to the Samba share, I then test by running DOS Edit, typing test, & then File->Print. It states that it can't print to LPT1 and asks to Retry, Cancel or Exit. No errors are given on the Samba side & Windows 98 doesn't seem to have an Event Viewer to tell me what's wrong. The whole thing works with Redhat 7.1 Samba though. Good old Samba 2.2. SIGH. So what I did was use my VMware Workstation & built an Ubuntu 10.10 workstation with Samba, built an XP workstation & Windows 98 vm image. I didn't have network printing, so I setup CUPS-PDF to print to PDF files in Samba. As with the "production" installs of their business, I got everything working just fine except DOS LPT1 on Windows 98. So I can get the same error in a test environment basically & it's still puzzling....
I just found out that many Synaptics touchpads are capable of multi-touch and it's possible to do 2-finger scrolling and more.I have enabled this functionality in windows and I am sure now that the touchpad inside my laptop is capable of that.In Fedora 13 (64-bit), however, I was unable to make it working. I found a guide for Linux (Ubuntu) right here:URL... In Ubuntu it multitouch worked without problems after following the guide.
I first thought that I screwed something up on my Fedora and downloaded/ran live Fedora 13 64-bit disk to see if this trick will work with Fedora intact. After trying that guide in live Fedora CD I quickly found out that I couldn't enable multitouch the same way as on Ubuntu.I have no idea what could be different. Both Fedora and Ubuntu had Synaptics driver installed on live CDs (and on my installed Fedora too).
I just installed an Ubuntu partition on my MSI U210 netbook. Wireless worked fine on the Windows XP that was there before, but not on Ubuntu. I tried plugging in the Ethernet, and that had no effect.
View 2 Replies View RelatedI have two 1.5TB hard drives (neither one are my OS drives) that don't show up under "Places", but are detected under "Disk Utility". I tried to reformat them, but Ubuntu tells me that they are in use (even they are not mounted). gparted also detects them and shows them as being NTFS parition. I have deleted and repartitioned to NTFS as well. This works until I restart my computer. The funny thing is that Windows 7 sees them just fine. More detail as to how this happened below after system specs.
System:
AMD Phenom II x 4 955
ASUS M4A79XT EVO motherboard
8GB DDR3 1333
1 500GB WD SATA drive (dual boot Windows 7 & Ubuntu 10.10)
2 1TB WD SATA drives (extra storage)
2 1.5TB Seagate SATA drives (extra storage, these are the problem children)
Here's how I got here:
Installed a dual boot w/ Windows 7 and Ubuntu 10.10. Everything was fine and ALL drives showed up and were mountable in Ubuntu. I decided to set up a RAID 1 w/ my two 1.5TB drives. I restarted, changed my SATA to be RAID instead of IDE and created my RAID 1. I then realized that through this motherboard's RAID setup, I couldn't have it copy files from one disk to the other to set up the mirror. So, after I rebooted and the RAID started building, I cut the power and unplugged my drives in a desparate attempt to keep my data. I then went back into the bios and set my SATA back into IDE instead of RAID. I was able to back up my data, but this is when the problem started.
Again, Windows 7 sees and uses the drives just fine. I copied the data I wanted from my 1.5TB drives to my 1TB drives and restarted into Ubuntu. But, no 1.5TB drives appeared under Places. I started Disk Utility and confirmed that Ubuntu does actually see the drives. However, it still lists them as being part of a RAID array (I did delete my RAID array properly through the BIOS after backing up my data). I'm not sure why it thinks that and I believe that's my problem. Also, Disk Utility lists a THIRD 1.5TB drive under "USB and Peripherals". Could that be my MB telling Ubuntu that a RAID is still set up even though I deleted the RAID pair?
What I have tried:Reformatted drives via Windows 7 as NTFS. This completed but didn't solve my problem.Repartitioned the drives with gparted as NTFS. This works until I restart my computer. Attempted to reformat under Ubuntu, but it gives me an error saying the drives are busy.Reinstalled Ubuntu (but didn't reformat). Didn't work. What I'm thinking:Flash my BIOS so my MB starts out fresh and hopefully doesn't tell Ubuntu I have a RAID anymore. Reinstall Ubuntu again (this time reformatting my OS drive).
Anyone have ideas as to what's going on? FYI I'm new to Ubuntu.
So my wireless card no longer works in my windows machine for some odd reason, probably due to the temporary video card I have until my actual one comes back from XFX. It works perfectly in the Ubuntu box though, so I bought a crossover cable hoping to have it automatically create a wired network that I can bridge to my router. Obviously it's not that simple.
Anyway, I have the computers connected through crossover cable and they sort of know there's supposed to be some form of networking going on (Windows has limited connectivity on "unkown network" while Ubuntu just won't connect to Auto eth0), but that's as far as I get. basically all I need is to:
1. Get the computers to connect to and communicate with each other.
2. Bridge the wired connection with the wireless one within Ubuntu so that the Windows computer can access the Internet as well as the shared files on the other computers in the wireless network.
I'm running 10.04 Lucid with Gnome desktop, if it makes a difference.
I write a lot in French and I need the french accent on my ubuntu. How can I get the shortcuts I used in windows such as "alt+130" to work again? When I use them, either nothing happen or it changes my tabs in firefox and chrome, I haven't found how to override this. I don't seem to have found anything in keyboard shortcuts...
View 4 Replies View RelatedI switched to Ubuntu a few months ago. The only thing I miss from Windows 7 were their new keyboard shortcuts for moving windows between a monitor or multiple monitor. This allowed you to take one large monitor and easily use it as two by pushing certain windows to one half of the screen or another via the keyboard.The keyboard shortcuts:
WIN+Up Arrow
Maximize the window.
WIN+Left Arrow
[code]...
when i installed it the windows 7 Partition no longer works. I can see the windows 7 partition but when i click on it, it just reloads the grub boot loader. Im in college and need the windows 7 partition.
View 5 Replies View RelatedI installed Ubuntu (10.04) today and it has gone smoothly except for the fact that I can't connect to the Internet when in Ubuntu (connection works fine in Windows XP). I am using a wireless USB card (Linksys WUSB600N) to connect.
The weird thing is that the card detects all the local networks, asks me for a password to my network, and it even says it is connected to my network after I put the password in -- but when I open Firefox no pages will load.
There is another weird quirk as well: Ubuntu will not restart or shut down properly (it hangs around indefinitely with the little white / orange dots going across the screen) unless I first remove the wireless card from the USB slot. But that doesn't bother me as badly as the lack of Internet.
I have a Gateway ML6721 laptop that uses a Realtek RTL8187B for wireless comms. I am very new to Ubuntu and Linux. I am trying out linux using a usb stick, 16Gb with a 4Gb persistence. If I stay in the same room as the router there is no problem. If I walk too far, I get disconnected. Works fine in windows throughout the whole house. Is there a setting I can change or do I need to use a different driver?
View 3 Replies View Relatedfor some reason, ubuntu cant see it anymore. so how to fix? windows still prints to this printer on the network. I deleted the printer in ubuntu and tried to redetect and now it says no printer at that address.
before I deleted it, I recall it saying something about the backend had failed?
I switched my htpc from windows xp to ubuntu 10.10 and since i switched my audio no longer works. these are my current stats. Please help im new to Linux so im not sure quite what to do. [URL]
View 5 Replies View Related