Ubuntu :: Installed, Now Windows Won't Boot?
Mar 11, 2010
I already had Windows XP on the HDD. I installed Xubuntu 9.10, and used the installer to cut out a 10 GB chunk for Xubuntu. Xubuntu boots correctly, but I only get a blinking cursor _ when I attempt to boot Windows. I'm pretty much a newbie with Linux, although I did take a while to play around with the Live CD before installing - so I generally know where things are, but know very little about what is actually going on behind the scenes.Can anyone give me some advice for what steps I need to take to remedy this? The goal is to be able to boot whichever OS I need at the time.Also - I'm sure that my old stuff is all on the HDD - I can access it, but strangely enough, I seem to need to try to open that file system with like Firefox or something - it tells me I need to mount it, I mount it, then it becomes accessible..
View 9 Replies
ADVERTISEMENT
May 6, 2010
I've just installed Ubuntu 10.04.
I'd like to boot using Windows 7 boot manager (I don't dare to put grub in the MBR).
I've used EasyBCD to add a new entry for Ubuntu.
[url]
Then I added Grub to /dev/sda3
And I get this:
[url]
The problem is that it always shows (hd0,0) instead of (hd0,2). I must change it every time I boot. I've tried to install grub again but I always get the same.
And another problem. After that Grub menu it deesn't load Linux but it loads a second grub menu [url] that loads Linux properly.
I guess I've installed two Grubs.
How can I remove the first Grub menu (Grub4dos) and make Windows 7 load the second (the good one)? or how can I remove the second one and change (hd0,0) to (hd0,2) in the second?
View 4 Replies
View Related
Nov 29, 2010
i got this new computer with Windows 7 on it and promptly installed Ubuntu 10.10. it didn't recognize my graphics card or screen, and i was too lazy to figure it out. (xorg.conf was missing?) anyway, I went back to windows and deleted the partition that linux was on. When i reboot the computer, all it shows is "grub rescue>" and a command line. as you can probably tell by my writing, i am a teenager who lives under my parents' roof and they bought me this computer, and now it doesn't work...so i used my backup disk and i reinstalled windows back to factory settings, and it still shows up with a grub command line. so does this mean that my win os is misplaced or something.. I don't know if this matters, but i have a Gateway with Intel Pentium dual-core processor.
View 14 Replies
View Related
Jan 25, 2010
10 yr old Dell laptop with NO WORKING DRIVES. i was dual booting xp and xubuntu when i decided it was time to cut the cord. so i installed gparted and deleted my windows partition. now it won't boot. my assumption is that i never installed grub. i got a usb to ide cable so i can access the hard drive from my desktop (xp home edition). i read that grub should be in a folder called "boot". i see on my hard drive that i have: "disks", "winboot" "install", "uninstall-wubi.exe", and "xubuntu.ico". if i expand the "disks" folder, there is a "boot" folder containing another folder called "grub", but the folder is empty. is this where i install it? am i an idiot and missing something stupid? where do i download grub if i need it?
View 9 Replies
View Related
Jun 11, 2010
So I JUST installed 10.04 on a new hard drive for the third time. I had it completely wipe the hard drive and install ubuntu itself (so i couldn't mess anything up). Well NOW it won't even boot up ubuntu much less my windows hd.
So the setup is, my first harddrive which is 640gb and has my windows on it, and then my second harddrive which is 80gb and has my freshly installed ubuntu 10.04 on it. Neither will load. I don't even get a loading screen, I just get a flashing line after my mobo's splash screen.
I ran some boot loader info script and one of the first lines was
Code:
No boot loader is installed in the MBR of /dev/sda
View 9 Replies
View Related
May 5, 2011
I have a Lenovo laptop with Windows 7 pre-installed. I would like to dual boot Win 7 and Ubuntu or Linux Mint.
In my old laptop I had an OEM Win XP disc that I bought specifically for dual boot purposes (didn't want the pre-installed vista). This only has a one PC usage though unfortunately.
how to make a windows 7 boot disk? I made a RECOVERY disk already, but I don't think that will work as a boot disk right? Particularly if I completely wipe out or swap out the HDD (which I might do).
fyi: I NEED Win7 for a few special programs for my school. WINE will not work and VirtualBox puts to much strain on my computer.
View 4 Replies
View Related
Aug 14, 2011
I have installed ubuntu 11.04 using wubi with Windows Vista Home Premium 32 bit. The operating system works fine. Althoughwhen I boot and choose linux I get an error message during boot which stays forever. I have to shut down using power button and start again when it boots fine.
Another problem is when I restart from ubuntu it restarts back to the desktop but when I shut down, it does not shut down the computer. Stays on with blank screen forever. I am attaching the image of latest error I received on boot.
View 4 Replies
View Related
Feb 3, 2010
I originally had my full hard drive as a full Ubuntu partition but I then re-sized that and installed Windows on a new partition. Now I guess the boot sector got overwritten and I don't have a choice to boot either Windows or Ubuntu. I know I have to reconfigure GRUB or another boot loader to allow the choice but I am not sure of how to go about that.
View 5 Replies
View Related
Jun 18, 2010
I have two hard drives, one (hard drive C) is 250GB and is the first hard disk. The second (hard drive Z) is 1000 GB and is the second hard disk in order. There used to be windows XP on C and Windows 7 on Z.
Because I installed 7 to Z from XP which is on C, it put the Windows Boot Loader on hard disk C. I didn't know this until now.
When I installed Fedora, I gave it all of C to install on. That messed up something because the Windows Boot Loader was on that drive, so grub didn't list it in the OS's to load. I had to add it manually, and got it working correctly so it had an entry for the partition that Windows 7 was on. This didn't work however, because Windows 7 on drive Z didn't have it's NTLDR on that drive, so now I have a 7 installation without an NTLDR on Z and a Fedora install on C. I am sure grub is working properly because when I change the load order of the hard drives to load Z first, it gives the same error:
NTLDR is missing
Press Ctrl + Alt + Delete to restart
or something along those lines.
Is there a way to get Z to have an NTLDR again and be able too boot Windows 7? I really hope I didn't mess up my entire 7 installation because of this.
View 9 Replies
View Related
Aug 5, 2010
I recently installed Lucid Lynx inside my Windows XP using Wubi. When I restart I don't have a boot screen giving me the option to boot into either or, it just boots directly into XP. How do I fix this so I can boot into Lucid?
View 1 Replies
View Related
Jun 9, 2011
I've just installed 11.04 on a new machine, to be dual booted with Windows 7. The installation process completed, popped the disc back out, but when booting up I get no boot menu and just load Windows 7. I don't get any error messages or any sort of feedback. If i go into BIOS, I only have Windows 7 as a bootable option. I presumed grub or an equivalent would be installed as part of the installation.
View 9 Replies
View Related
May 13, 2010
linux and a good thing to start is to install centos in my pc together with windows xp. please help me on how to dual boot Centos 5.0 and Windows XP pro step by step.
View 2 Replies
View Related
May 8, 2010
I have a WD 80GB ATAPI hard disk for my operatings systems.
The partition table is :
First i installed Windows and then Slackware.
The problem is that in MBR , looks that lilo never installed and when my pc starts, the lilo menu never load it . Boots directly to windows.
What i should do, in order to have the lilo menu in startup?
View 13 Replies
View Related
Jul 29, 2011
how to install Debian after Windows is already installed. Could someone give me a brief guide to begin the process of installing Windows? When I installed Debian I already made a partition for windows (in the same hard disk), I hope I did it right.
View 3 Replies
View Related
Jan 25, 2011
I just bought a new Windows 7 machine and want to install Ubuntu 10.10 for a dual boot environment.There's a lot of info describing how to do this, but it all describes re-partioning the Windows drive, burning Ubuntu on a CD, inserting that CD, etc. I had a dual-boot Windows and Ubuntu machine that just died on me. Windows was on one hard drive and Ubuntu - along with my entire software development environment - was on the other. As far as I know both drives are fine.
When my new (Windows) machine gets here I want to open it up and stick in the Ubuntu hard drive from my old machine... but then I'm not sure what to do. I'd really like to be able to boot to that hard drive (or the Windows one), just like I did before. It seems that this should be simpler than installing a fresh Ubuntu from a special CD, after all, everything is already expanded and working on the hard drive. Can someone give me some pointers that will help me solve this problem?
View 3 Replies
View Related
Mar 17, 2010
After Reinstalling windows how 2 boot ubuntu i.e installed via Wubi perviously on win After Reinstalling windows how 2 boot ubuntu i.e installed via Wubi perviously on windows 7. I am running Ubuntu 9.10 on my Laptop, where it installed via Wubi on Windows 7. [windows 7 (Cand ubuntu on the different drive(U(NTFS)*its not a dual boot as installed via wubi]. For some reason My Windows needs a reinstall but in this case i think i will also lost ubuntu because its installed via Wubi.
Part 1 - I need to back up all the data that is installed in ubuntu i.e. SMplayer,Graphical GTK theme,Compiz,Emerald. and its setting,means the whole ubuntu system. So that after installing windows and ubuntu as a dual boot (not wubi again)i do not need to configure and install the whole ubuntu data/software again. Its pain for me to downlad again and again the data for ubuntu [Coz low speed connection ]
Part 2 - if it is possible that after Reinstalling windows i can boot into ubuntu that is previously installed via Wubi on different drive that please tell me, how could i do that. ****if it is not possible than please show me the way to do backup all the data,software,plugin that is downloaded.etc. I need to back up the whole Ubuntu because after installing windows i am goin 2 format the ubuntu drive and make it to Ext4 that is currently NTFS and then i will install the Fresh 9.10 on that.
View 1 Replies
View Related
Dec 5, 2010
What I want to do is dual boot Ubuntu and Windows 7 (which is already installed), and am wondering if I have to use the Ubuntu installer for windows to do this. I do not want to wipe my hard drive in order to install Ubuntu, and I need to install the 64-bit version. I'm wondering if I can choose which version to install if I use the Ubuntu installer for Windows. Should I just install it using a different method, or will I be given a choice on which version installs? Never mind, it looks like the normal installer has an option to install alongside another operating system, I just didn't read through the page thoroughly enough.
View 1 Replies
View Related
Jun 16, 2011
I have a problem when i installed ubuntu via usb drive and cd.. and i try it in windows xp and windows 7. it's a same problem .. but this is the error message " permission denied "
The log:
Also i try this v Ubuntu 11.04 Ubuntu 10.10
View 2 Replies
View Related
Aug 5, 2011
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
[Code]...
View 1 Replies
View Related
May 28, 2010
following is my fdisk:
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xed73ed73
[Code]...
View 3 Replies
View Related
Nov 4, 2010
I installed ubuntu 10.10 32bit on my HPDV6 laptop and I selected "Install alongside other operating systems" setting and Installation went fine. But after restart I got GRUB panel and selected Windows 7(loader) dev/sda1 for boot. It comes with the widows 7 log on screen and after few seconds the scandisk and it says my c: (windows) drive need to be "scan for consistency". But scan is also not running and it terminates. But after that Windows 7 loading fine. Every time I select windows 7 and this error is being occurred.What should I do now for get rid of that scandisk problem? Is the problem with GRUB?
View 3 Replies
View Related
Dec 15, 2010
Windows 7 was pre installed on my PC. I installed Ubuntu 10.10 along side with Windows 7 using live CD.After installation i am allowed to enter only to Ubuntu.No bootmenu (grub) on startup - can't choose OS.
Code:
$ sudo fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]...
View 9 Replies
View Related
Apr 25, 2010
I downloaded Ubuntu 10.04 and I want to make a dual boot with Windows 7 Ultimate using Windows Boot Manager...
I deleted my last Ubuntu OS (9.10) just because of GRUB
View 2 Replies
View Related
Feb 13, 2011
upon adding the installed VL on the existing LILO.. (btw i have not installed its LILO on the installation setup) since i know that i will just add it to the "existing" LILO the error above arises upon doing the lilo run command.$adding Vector6.0 etc.FATAL : Boot sector of /dev/hdc13 doesn't have a boot signature.i have tagged the /dev/hdc13 bootable via CFDISK. but same problem arises..
View 8 Replies
View Related
May 2, 2011
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
View 3 Replies
View Related
Apr 17, 2011
Before the installation, I had triple boot of WinXP, Win 7, Ubuntu 10.10. As you can guess, the main boot-loader was grub. The second is Win 7 boot loader, and there it gives the option what to choose, load XP or Win 7.I made a decision to remove Ubuntu and install Debian(you know better than me why I did). So first, I searched a guide how to un-dual-boot. It told me to delete the two partition that Ubuntu use(swap and ext4) and write to MBR the win 7 boot-loader(using EasyBCD), so I delete them and use EeasyBCD. At this stage, I had 2 partitions: NTFS for XP and NTFS for Win 7, and the Win 7 boot-loader(and XP) worked pretty well.I install the latest testing of Debian(6 RC2) from DVD1 using this guide, except I choose to use the graphical installer, ext4(not ext3 as there), install the desktop environment, and choose to install grub(even know it didn't asked me). The swap partition I set is 3 GB because my RAM is 2 GB, even know that ubuntu set it in the past to 2 GB.The installation went pretty well, just when come to grub package, it says that there was an error with installing grub package(it didn't told me what), I had no choice, so I choose to skip over grub/lilo and finish with no boot manager. I was thinking to myself: "So I couldn't install grub, at least I have the Win 7 boot-loader(which contain XP loader), and maybe Win 7 boot-loader will recognize Debian too.". But I end up with no boot at all.It told me than when choose not to install boot-manager that I need to load /vmlinuz and give it the parameter root=/dev/sda4(my deb partition).I think that if I could install grub, I could load all my boots("sudo grub update" right?).How can I fix it?
View 3 Replies
View Related
Mar 9, 2010
SO I installed Ubuntu 9.10 nad then windows XP. Now I can only get into windows. I tried to re-install Grub on the linux partition but I get an error: Cannot Read `/grub/core.img`correctly
I followed the tutorial on this forum. I booted to my Ubunut CD, ran termainal, sudo fdisk -l, mounted my Linux partition and ran sudo grub-install --root-directory=/media/sda1 /dev/sda1. Which gave the error above.
How else can I fix this. Bearing in mind I cannot log into my Ubuntu system.
View 3 Replies
View Related
Oct 19, 2010
I figured the GRUB bootloader would know of it anyways, so i thought nothing of it when i installed Ubuntu on a seperate partition than Windows7. Now, (I dont have discs, and a my cuz let me use his, and he lost the disc), so i cant exactly just repair the MBR. Is there a way i can add it to the bootloader?
View 1 Replies
View Related
Jul 23, 2011
want to say that I was a windows user just about a week ago. Then I installed ubuntu on a USB flash drive, just for fun, and now it's installed as main OS on my laptop and the only thing I use windows for is syncing my iPod touch with iTunes. (Yes, I know about other possibilities to copy music to it from ubuntu, but I want to continue using iTunes.)
Now my main problem is that since I installed ubuntu (10.10 Maverick Meerkat), my windows (Windows 7 Home Premium 32 Bit) sometimes crashes during startup. Sometimes it boots up perfectly normal, then in some cases it crashes at the first attempt to boot and when I retry and choose "Start Windows normally" it works just fine and then there are the times when it crashes everytime I try to boot. I wasn't able to find out why it sometimes works and sometimes doesn't. I also removed all USB devices during startup but that didn't change it.I noticed that when I start Windows in safe mode first, it works, then I restart and choose normal mode and it works too.Has anybody experienced this issue and/or knows a way to fix it? It's just annoying to have to try several times just to be able to keep my iPod synced.
View 8 Replies
View Related
Mar 15, 2010
I used see woobly windows on my ubuntu desktop,but yesterday i installed compizconfig and then played arround with some settings and now woobly windows is gone .although i have checked extra option in visual effects but to no use now.i want my woobly windows back again can anybody let me know how i can do it once again.
View 1 Replies
View Related
