I've tried to purge[linux] goldendict and reinstall it, and when I type 'goldendict' inside the terminal it outputs 'Another GoldenDict copy started already.'And running 'sudo killall goldendict' outputs 'goldendict: no process found'
View 3 RepliesI have goldendict and I want it to pronounce words,how can I do that?
View 2 Replies View RelatedI had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
How do I install goldendict ?stardict I installed but when I do a word search word to the show:I still can not install the Avant Window Navigator?Which means I'm enabled the repo?
View 2 Replies View RelatedAfter using the "nomodeset" option from the live cd I was able to get the live CD to boot to perform the install onto an SSD.
Upon the first boot I get the same screen that I was presented without the "nomodeset" option specified on the live cd and I'm pretty stumped as to how to get this machine booting now... here's a picture of the lovely screens I get.
Sorry in advance for the GIGANTIC picture... but perhaps the gibberish will stimulate your thread-answering abilities
I edited some file in /etc and it stopped loading, but after upgrading to natty it loads again. I'm already starting X manually from /etc/event.d/tty7, but the X started from gdm is the one I see on the screen. I don't have a keyboard, so I can't switch to the console with the right X after startup. Is the only option to deinstall gdm, or is there a way to make it not start?
View 2 Replies View RelatedI just installed Ubuntu 10.04 on my laptop, and am amazed how well everything is working, even on my dual-monitor setup! But, I also have a problem with said setup. I downloaded and installed the XBMC media center, but whenever I open up the application, it displays across both monitors. Since my two monitors are of different sizes and at different heights, it looks really bad. Is there a way to always force it to load on just one monitor?
View 1 Replies View RelatedI'm wondering if anyone can tell me how to make rhythmbox appear when I load it? At the moment it just puts an icon in my notification tray. However, I just want it to appear so I can choose music! Does anyone know how I can just make rhythmbox appear on screen when I start it up?On a related note, does anyone know why rhythmbox has this odd behaviour? If I'm starting the music program, there's pretty much a 100% chance I want to start playing music, and I can't do that without looking at my music list in the player. So why would it not appear by default?
View 3 Replies View Relatedi was using dual operating system windows xp and linux ubuntu. I was upgrading my windows from xp to windows 7 and as usual the windows messedup it stopped installation halfway and now it gives me only two options for rollback or go to the previous windows (which it is not going to either). It is not loading the UBUNTU GRUB.
Did windows kill my ubuntu ?
This nvidia driver is driving me nuts... I have tried everything I can think of including multiple solutions from threads.
I have a GeForce FX5200 with the nvidia-current drivers installed. On boot I receive the following error messages... code...
If I try and open the nvidia server settings I get the following message.
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.
In Jockey I get:
The driver is activated but not currently in use.
I am using headers 2.6.32-23 and have updated to grub2 (something that seems to have fixed a mismatched header issue for others). I have uninstalled and reinstalled drivers, edited the xorg.conf with nvidia-xconfig as well as manually and I don't know what else to do... any suggestions would be appreciated... 640x480 is crap.
I have Ubuntu 10.04 LTS installed on my HP Compaq Presario CQ60. Unfortunately the screen is busted & I'm using an external LCD. It boots directly onto the LCD, but the resolution is 800x600 by default, the only other option is 640x480. I'm assuming its using the VESA drivers for the graphics. I've managed to temporarily fix the resolution to 1024x768 by running the following in terminal for every session:
[code]...
I've added a document to /etc/init.d so that it may be loaded on startup, but it does not seem to work.
Grub Wont Load Windows.
The Option is not there.
Its Debian.
i want to make a squid load balancing. i followed this tutorial [URL]this is my squid.conf (a part)
Code:
cache_peer 127.0.0.1 parent 9090 0 no-query originserver name=server_1
acl sites_server_1 dstdomain www.benvin.com
cache_peer_access server_1 allow sites_server_1
cache_peer 127.0.0.1 parent 9090 0 no-query originserver round-robin
[code]...
I put the KDE NOIPV6 in the /etc/environment file, but nothing happened it seems.
The problem = Midori / other browsers are too unstable with Flash; but Konqueror is lightning-fast with Flash and apparently takes up the least resources too. But the problem with that is, the aforementioned 20 seconds to 2 minute web page load time, even though I have 5-8 MBps cable Internet.
Midori is a little slow too to load web pages, now that I think about it, but faster once I have first visited a domain.
I am using Suse 11.4, with the Gnome desktop. I have downloaded the VLC player, but cannot work out how to make it play CDs in the CD drive. Right clicking on the Audio Disc icon that appears on the desktop whenever I load a disc doesn't give me an option to Play using VLC. Is there a way to make VLC the default player for CDs?
View 9 Replies View RelatedAbove adapter can be installed on v10.2 and 11.3 using ndiswrapper:-
1. Copy the 3 driver files from Windows:- like netwpn111.inf, WPN111.sys & ar5523.bin.
(Be carfeul about the exact names, because they have changed over time).
2. sudo ndiswrapper -i netwpn111.inf
3. sudo ndiswrapper -m
4. sudo modprobe ndiswrapper (the adapter should light up at this point and networks will be detected shortly after - see network manager). (Be careful of paths here - e.g. I had to use /sbin/modprobe - so 'whereis' may be necessary to find these commands).
2nd When I reboot, I need to run the modprobe command again. How do I make the module load automatically on boot? Also (and this is minor), can I bypass the KWallet, keyring thing? it seems silly to enter a password for the keyring and then click another password dialog, when I can just as easily enter the password for the network itself.
When i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
I installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
View 1 Replies View RelatedI'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.
So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts).
Its so weird though that live version works and the installed version does not.
Here are my specs:
I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
I noticed my Firefox loading rather slow (took around 5 - 7 seconds to load and navigate pages, even google, and it would sometimes become unresponsive), I thought it may have been a addon problem, so I opened up a new Firefox profile with no addons but the browser crashed upon loading the certain page I was trying to view, and I figured I'd look into it later and use Chromium for a while (I'll be open, I was trying to watch an pron tube site, and when your, you know, you don't really feel like stopping to go technical and try to fix it or whatever), but Chromium said that the flash player wasn't installed. I thought it was kinda odd, but then again I didn't want to go technical and thought maybe since mozilla firefoxs engine loaded the flash, I'd use Mozilla Seamonkey which uses the same gecko engine. The flash wasn't working either on there.
I tried looking up to see if there was a 64bit deb package for flash, but they didn't have it, and I seen someone mention that doing the 'apt-get upgrade' upgrades it, so I did that, and it also said it installed some extra packages when doing it, but I figured it was just that getlibs grabbing the extra dependencies and went along with installing them (after all there shouldnt be much to lose since its from the repository, right?)
I restarted the computer to give the updates a chance to take effect (it didn't mention to restart, but I thought I'd go ahead and do it anyways to ensure it updated okay).
This is where the booting problem comes in: When my laptop restarted, the loading was going across very slowly (I have ubuntu studio installed through regular ubuntu, so it was showing the text filling up), normally it would just fill a little bit of the first "U" in "Ubuntu Studio" and then be done quickly, but now it goes slowly all the way, and when it fills "Ubuntu Studio", it stills stays there, it doesn't load on.
I pressed the down button to see the terminal and it says this:
Code:
I have no clue what to do now, and I wanted to ask for help before I go trying myself editing the command line boot process.
I am getting an error as below.
How do I resolve the error: make[2]: *** No rule to make target `', needed by `mpg123'.
How can I resolve this error.
I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
View 1 Replies View RelatedI reinstalled fedora the other day, and it's been working just fine, apart from the internet. It shows that I have a full connection with the wireless network, but it's really difficult to actually load a page. 80% of the time it just fails and shows "Page Load Error". It's really frustrating because it is connected to the internet. In fact, the icon in the address bar even loads from the site I try to access, but websites just will not load.
I've tested my wireless internet with another laptop which is running vista, and it works perfectly on that. Also, I'm running Fedora 10 on an Acer Extensa laptop.
I want to load grub2 from grub4dos.I want to load directly the grub2 core. I know how to load first 512 bytes from some patition by chainloader and load grub2, but what I need is to load directly grub2 core without passing by bootstriping code (first 512 bytes).So, my first boot manager is grub4dos, then I can load grub2 and later I load Ubuntu. But I think I have to edit --set-root
What I dont know is how.
In hdd 0,7 (sda8) I have Ubuntu 10.10 and /boot/grub/core.img is in sda8 (hd0.7)
I tried this way:
Code:
title grub2
find --set-root /boot/grub/core.img
kernel /boot/grub/core.img
I dual boot XP and FC14 and have 2 routers. I can connect and ping one of these routers when I'm in FC and I have an IP address I just can't load any websites. When I connect to the other router (my main router) it works fine. When I boot into XP and connect to the problem router I can load pages fine. It's only when I'm on FC14 and connect to the problem router that I can't load pages even though I have an IP and can ping around.
View 1 Replies View RelatedI notice that when you try to Make link to any file or folder form context menu, It just copy the same file size? even when i tried to copy the link to external storage disk..
View 1 Replies View RelatedI am following the instructions on Section 8.1.* Device Driver ConceptsHere I was able to proceed till section 8.1.4.After making the hello.c file,the make file and patching the Kconfig as mentioned,I tried to run the $ make ARCH=ARM CROSS_COMPILE=xscale_be- gconfig This gave error as:make: *** No rule to make target `gconfig'. Stop.I am not sure if my kernel is correctly compliled,but I was able to complie and build the kernel for arm before by cloning the kernel and building from the following link without any error. https://omapzoom.org/gf/project/omap...ux+OMAP+Kernel
View 2 Replies View RelatedI just installed Gnome Shell in Ubuntu 11.04 through UGR Linux and everything works fine! The only problem is that I cannot run make and make install. I get the following errors:
Code:
alexandros@Autobot:~/gnome-shell/source/gnome-shell-extensions$ make && make install
Making all in extensions
make[1]: Entering directory `/home/alexandros/gnome-shell/source/gnome-shell-extensions/extensions'[code]........
he clicks on everything on his GNOME desktop, and manages to delete everything, including menus, icons, etc. The people he lives with aren't skilled enough to fix it, and I live a good eight hours away. I have remote capabilities with NX, but that requires them to initiate a connection to my workstation here, which is more painful than I thought it would be. I need a way of locking down the desktop, so it's read-only, so he can't make the changes he seems to keep making. I figure I could make the .gnome directory read-only, but I don't know if that would affect the normal operation.
View 3 Replies View Related