i was using dual operating system windows xp and linux ubuntu. I was upgrading my windows from xp to windows 7 and as usual the windows messedup it stopped installation halfway and now it gives me only two options for rollback or go to the previous windows (which it is not going to either). It is not loading the UBUNTU GRUB.
Did windows kill my ubuntu ?
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
So I have 2 ide hdds but whenever they are both connected, grub gets stuck at GRUB loading stage 1.5. how can I resolve this problem?
both are Maxtors with ext4 fs. primary is 20 gb and secondary 80 gb.
Jumpers are set to cable select.
Boot order in bios is correct. (primary first, secondary isn't in the list at all)
Grub Wont Load Windows.
The Option is not there.
Its Debian.
Ubuntu 10.04 not loading. Sticks at GRUB Loading message.
Read the other threads re OS not loading and GRUB. The talk about code goes over my head.
Local techie says the hardware is good. Tried reloading Ubuntu from CD. Tried loading the unmentionable OS.
Tried using Spotmau Powersuite.
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
Yesterday I partitioned my hard drive with kubuntu netbook remix and windows 7. after a few hours and reboots i turned on my computer and it said Grub loading. unknown filesystem rescue grub> It looks like allot of people have been having similar errors recently with windows 7.
View 3 Replies View RelatedMy Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
View 2 Replies View RelatedI have an Ubuntu Jaunty server with 4 x 1 TB Hitachi SATA Hard drives and a 4GB IDE Flash Drive. I installed the root file system to the IDE Flash Drive and setup the 4 x 1 TB Hard Drives as a RAID 5 for the home partition (I actually allotted 3 Gigs on each drive as swap space as well). My problem occurs however when I restart my computer after the server installation. Grub doesn't load fully and I am left with a "GRUB_" message on the screen.My root partition is ext3 and I have also tried the same configuration with a boot partition as well on the IDE drive to no avail.
View 2 Replies View RelatedFirst the hard data:
Upgraded from Ubuntu 9.04 to 9.10 via upgrade manager
System is AMD 64
Have dual boot with XP on seperate hard drive
[code]....
Then the wheelspin:
Seem to have knocked out GRUB as normal loading screen does not appear anymore.
Worse, I think I accidently installed grub to something labelled SDC5.
Cannot get anything except the "grub rescue" prompt. I'm not sure if using the LiveCD (9.10) can help. Have tried a few prompts from other threads but just ended up with mud splattered all over the place. I'm gathering I need to load grub, but can I do it using any grub rescue commands?
When I start the computer the boot menu doesn't prompt, when I try to load it manually it doesn't prompt neither, it just reset the command line.The grub.cfg was generated by update-grub.It's really annoying to load the kernel manually each time the computer starts.
View 3 Replies View RelatedI downloaded the Desktop version, I tried burning it with Nero, Magic ISO and standard windows burning of an ISO. I even unpacked the ISO and burned the files. One of my disks works INSIDE Windows. I started wubi and followed the instructions..it rebooted pc and went right to windows desktop. I even hit f12 and forced to boot from the cd...went to windows. I am obviously doing something wrong. I think my system is fine...2 gigs ram, Intel Pentium M processor 1.72 ghz. I bought a new HD and was forced on windows install to partition it......bios won't let it have a partition bigger than 120 gigs. That leaves me with a 40 gig ( nearly ) partition....which I formatted.
View 3 Replies View RelatedPC: Dell Precision T7400.O/S: Windows XP SP3 64-bit & Scientific Linux 5.3 64-bit
The above PC has 2 HDDs installed one has XP and the other Scientific Linux.
Problem: XP needed to be re-installed, i've done this now but now the GRUB Boot loader doesnt load - So just boots straight into XP.
Qustion: Is there anywhere to fix the GRUB? Without wiping the 2nd HDD and re-installing Linux!
Let me know if you need any more info
I have installed the ubuntu 9.10 and the pc already have 2 win 7 OS and 1 win xp I installed the ubuntu from win xp every thing go just fine but in win 7 boat loader it detects the 2 win 7 OS , previous windows ( the xp )and the ubuntu which fails to load from win7 boot loader ( the first problem ) but it is present also in win xp boat loader so when choosing older windows the win xp bootloader let me choose between windows xp and ubuntu which works fine when choosing it the ubuntu bootloader appears with ubuntuubuntu safe modewin7 bootloader
the second problems that choosing win 7 after restarting the pc from ubuntu fail to open it begin loading with the windows logo and then just shutdown the whole pc as if i have unplugged it! the only way to let it open is to choose older windows>>> ubuntu >>>> ubuntu bootloader >>> where there is win 7 bootloader option it returns me again to win 7 bootloader but this time the windows load complete ( mostly but may shut down also!)
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
fedora 12 with php 5.3.1 + apache is installed on the server
I needed a FFMPEG + MENCODER + FFMPEG-PHP setup , so I have installed all of the necessary libraries/codecs along with ffmpeg , mencoder and ffmpeg-php
I've added ffmpeg-php (ffmpeg.so) module to php.ini and restarted httpd
But ffmpeg was not showing up in phpinfo() so I grepped : php -i | grep ffmpeg
for some clues and got this warning
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/ffmpeg.so' - /usr/lib/php/modules/ffmpeg.so: undefined symbol: php_gd_gdImageSetPixel in Unknown on line 0
That error explains why ffmpeg is not loading
Obviously something to do with GD library , so I've researched on the net , and found that some users suggest loading the GD module before FFMPEG module.
I gave it a try and added this at the end of php.ini:
Code: [gd]
;loading gd
extension=gd.so
[ffmpeg]
;loading ffmpeg
extension=ffmpeg.so ...but still same error when greping phpinfo()
I need to load php module without restart/reload apache, is there a way to do that, php has its option to load zend extension using '-z',
php -z <filename>
is there anyway because I need to load php module in runtime, that I don't want to loose the live running session.
I recently re-installed my dead home server with Ubuntu 9.10 Server but it seems that there is a large delay loading grub, before the error "error: no such disk" comes up and the Ubuntu finally boots normally. I've videoed it, see what I mean at http://www.......com/watch?v=0H7hsa5QIc0 .
What would be causing this error and how would I go about fixing it?
i reinstall it but just one of my ubuntu came.by the way i have 5 ubuntu 9.10 and 1 windows xp.how can i add my windows xp to grub loading?
View 2 Replies View RelatedI just upgraded to 10.04 from 9.10 and when I choose to boot to my Win7 Pro it just loops back to the grub menu. I did choose the partition that Windows is on when I was upgrading and it shows up in the menu.
View 3 Replies View RelatedI updated Ubuntu and part of it was an update to grub. When it came up in the installation I told it to keep the old one and left everything as it was. Then when I tried to reboot into Windows it gave an error message. So I went back into Ubuntu and reinstalled grub and now when I select Windows it just loops back to grub.
View 4 Replies View RelatedRecently I have had some problems starting linux, It gets to a part where it says it's loading grub and gives a countdown. I am using 10.4 ubuntu and it shows next a white ubuntu symbol. It then starts doing a system scan and gives a percentage when it gets to 33% it stops and says it can't mountall and that there is something wrong with the file system I can't get past this unless I don't even let the scan start. I think something is a file is messed up but I have no idea what to do.
View 3 Replies View RelatedI started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
installed my amazing ubuntu on virutalbox because i have windows. after i "rebooted" my box it took a fail and says "GRUB loading..." and never stops loading until vb eventually gets fed up and just crashes...
View 2 Replies View RelatedI have UBUNTU 9.10 and WIN 7 installed on my computer. I turn computer on, choose UBUNTU, do what I need and shut down computer (or reset - doesn't matter). Turn on computer again and get message:
GRUB loading.
no module name found
Aborted. Press any key to exit.
Operating System Not Found.
So I turn comp from Live CD, install GRUB and after resetting computer everything seems fine - but unfortunately not for long. Next reset and the problem is back again. The problem only occurs when I choose UBUNTU. There is no problem with WIN 7...
I have been running Ubuntu 9.10 ever since it was released, on my HTPC. However, for some reason when a new kernel comes out and I upgrade to it GRUB 2 doesn't load the newest kernel but just loads the old original kernel that came with it when I originally installed 9.10. I have confirmed that the newer kernels are installed by editing the GRUB 2 command line at startup (just a temporary fix) and all worked well with the newer kernels. How can I make GRUB 2 load the newest kernel by default. On my laptop running 9.10 it has loaded the newest kernel by default ever since I installed it but my HTPC just won't cooperate.
View 3 Replies View RelatedI was and idiot and stared messing around gparted before I was ready to partition my hard drive. Consequently I messed up my partitions, and when I restarted my computer a screen comes up that reads:
GRUB loading.
error: no such partition
grub rescue> _
Have I killed my computer or is there some way I can fix it?
I have a dual boot system with Windows 7 and Ubuntu 9.10. I booted into Ubuntu and started the process to upgrade to Ubuntu 10.04. When it was all finished, it restarted and attempted to boot into the GRUB load screen. However, I get this message:
GRUB loading.
error: no such disck
grub rescue>
I have Windows xp and Ubuntu 10.04 in my system and last fine morning I was working in windows and when I restarts the system as there were some problem in the audio I found that the grub is not loading. Computer boots directly in the windows xp mode and not giving the possibility to boot in the ubuntu OS. Also, the windows xp restarts continuously with a blue screen for just a second.
This happened out-of-the blue. What might be the possible reason for this and how to get rid of this problem..
