Ubuntu :: Get Sound On Front Channel?
Sep 5, 2010
I have a fresh install of Ubuntu 10.04 and I cant seem get the sound working properly. I have a checked to make sure that nothing is muted, and I do have sound over the rear channel when I change the wiring on the physical machine. However, I get no sound over the headphone channel. I also changed the conf for pulseaudio to have a default of 2 sound channels. In addition the sound works fine in my Fedora 13 and Win 7 installs, this is a triple boot machine .
View 1 Replies
ADVERTISEMENT
Jan 7, 2010
I'm running Ubuntu 9.04 and I've just gotten round to updating the sound. The ALSA built in is too old to have support for the X-Fi chip used in the Forte so I built and installed ALSA 10.0.22.1. On reboot, it detects the card as X-Fi Titanium series (as expected), but when I run the test
Code:
speaker-test -D surround51 -c6 -twav I only get output from Center, Rear Left, Rear Right and LFE - i.e. the front channel is missing. I'm not sure if there are any ALSA configuration files left lying around from my old sound card (Intel HDA audio) and I've forgotton what they might be called or where they would be.
Can someone tell me the locations of the various ALSA configuration files? Or is this a known thing about the Forte? (Maybe the card has the front two channels wired differently or something) Or maybe there's a configuration option I've missed.
View 3 Replies
View Related
Jun 22, 2011
Strange one. Just upgraded my mother-in-law's computer from 8.04 to 10.04 via the update manager. All seems to be working beautifully except ...
* When I run gstreamer-properties and do an output test I get a test sound through the headphones plugged into the front audio socket of the machine using the 'Analogue Headphones' setting in Sound Preferences. (This rules out dead headphones.)
* When I try to play audio through any app I get no sound through the headphones, but if I change the setting to 'Analogue Output' in Sound Preferences I get audio loud and clear through the speakers which are plugged into the audio socket at the rear of the machine. how the gstreamer-properties test is getting audio to the front socket I guess I'd be getting somewhere.
View 2 Replies
View Related
Nov 4, 2010
Basically as the title suggests. I'm a linux noob, I've spent a few hour's looking around, but all I seem to be finding is people with problems of no sound, and so I dont know if the solution would be the same.
I have perfect sound from the rear speakers, the front centre, and the sub, but the front left and right are completely silent.
Things I think anyone may need to know
Mobo - GA-880GM-UD2H
Onboard sound - SBx00 Azalia Intel HDA
Ubuntu 10.10 x64
View 7 Replies
View Related
Mar 19, 2010
found one other post with this same issue, and the final reply was "I give up"...I got a fresh 9.1 install. I just want to record some audio, but it's only recording on one channel, the left channel.I tried audacity and sound recorder. checked the sound preferences, Hardware set to Analog Stereo Duplex. In audacity Preferences > Devices > Recording, 2 (Stereo) is selected.When recording in audacity the output meter for the left channel shows activity while the right channel looks like it goes up a little bit but doesn't peak like the left channel. I hear fuzziness in the right but all the sound is in the left
View 4 Replies
View Related
Mar 20, 2011
I have a front mic jack with three wires labeled Grnd, Mic-in and Mic-pwr. on my MSI k9n6pgm2 mainboard my JAUD1 header reads 1-10 as AUD-MIC,
[Code]....
View 1 Replies
View Related
Feb 3, 2011
I recently bought an HP Pavilion Elite HPE-570t. Except for the fact that I can't get the back speaker jack to work, Maverick works great. Here's info that seems relevant:
aplay -l
card 0: PCH [HDA Intel PCH], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code]....
I've look at Alsa Mixer. There are two tabs (IDT ID 76c7 and ATI R6xx HDMI). I turned the second one off, since I don't have any HDMI sound output device connected to the computer. On the other tab, there are five sliders (Master, PCM, Front Mi, Line and Mic). They are all turned on, and the first two are at maximum volume.
It seems to me that Ubuntu is not recognizing whatever controls the rear speaker jack.
View 1 Replies
View Related
Jan 4, 2010
I have installed Ubuntu on my MSI Mega PC but have no sound, also the display on the front of the computer doens't work. Unsure if there are drivers for this but here goes:
[Code]...
View 5 Replies
View Related
Jul 14, 2010
I was hoping that upgrading to 10.04 would fix my problems with sound and HDMI but alas it doesn't. I have an HP dv7 that I wish connect via an HDMI cable to my HDTV and play things like Hulu, Boxee, etc. with the sound coming out of my home theater system. I know that the hardware is capable of doing this because I have Windows 7 installed in a dual boot and it has no problems with pumping sound down the HDMI channel.
I've upgraded to Alsa 1.0.23 freshly compiled. With 1.0.23 I see HDMI settings in Pulse Audio Volume Control. However if I start say VLC and play a video, check pavucontrol and make sure the Playback is set to the HDMI channel. I can hook up the HDMI cable and I can see the video playing - but no audio. I've been in and out of all kinds of things like alsamixer, gnome-alsamixer, sound preferences, etc. and I've toggled things on and off in an attempt to get HDMI sound working but nothing works.
In alsamixer if I hit f6 I see my 0 card as HDA Intel and my 1 card as NDA NVidia. If I select NVidia I see only S/PDIF, S/PDIF 1, S/PDIF 2, S/PDIF 3. I can only mute or unmute these. I've tried both - nothing works. Let me know what sort of output/info you need and I'll post it. Here's some info I've seen others post:
[Code]...
View 5 Replies
View Related
Jan 29, 2010
with my motherboard the onboard back sound jack's audio is VERY quiet, but the front jacks wired into HD audio work fine. (I'm building an htpc, btw.)
I tried for weeks to get it to work, but eventually I just pulled a cheap Dynex DX-SC51 card from another machine and turns out it works, but now I can't use the inputs and headphone jack on the front of the case without going into system>preferences>sound and changing "output" back to "internal analog audio stereo"
Is there any way to activate these two audio devices at the same time?
View 1 Replies
View Related
Mar 25, 2011
I have small sound issue - no sound on front panel and headphones are greyed out in alsamixer. This issue appeared after i installed new video card (New video card also adds a pseudo audio device "HDA Nvidia" (without any controls in alsamixer).
View 6 Replies
View Related
Mar 16, 2011
I have openSUSE 11.4 KDE version (64-bit) on a desktop PC. My sound card is ASUS Xonar DX 7.1 (PCI-E). I am brand-new to the Linux experience. I get audio out to my speakers which are connected to the jacks of the rear I/O panel of my PC. I do not however get audio out to my headphones which are connected to the jack in the front panel. I know that the headphones work fine because they do so when I boot up in Windows XP. Here is what I discovered so far: KMix does not show that I have a front panel audio channel. But when I run AlsaMixer it does show that I have such channel and, upon manually turning the volume on, I do have sound out to the headphones.
Therefore, I deduct that I have some sort of configuration problem with KMix and would like to fix it as I prefer to use the GUI interface instead of the AlsaMixer one. It's just a matter of preference! I would like to troubleshoot things using the Audio Troubleshooting guide (SDB:Audio troubleshooting - openSUSE) but I notice that openSUSE's version 11.4 is not mentioned in it. Should I follow the instructions for version 11.3 or wait for an updated guide?
View 2 Replies
View Related
May 11, 2011
I have a 4.1 surround setup that the computer sees a 4 channel setup (stuff going to subwoofer is split out in hardware so all the computer sees is the front and rear l/r channels).
All well and good, but phonon isn't giving me an option to set my output to 4 channels, only stereo (which means my rear speakers are useless) or 5.1 (which makes me fear losing channels if I play anything with actual surround sound).
View 3 Replies
View Related
Jul 3, 2011
I just installed 10.10) i had speaker audio on my laptop but the front jacks for head phones didn't work. After fidiling with some config files, i forget which config thing it is in but there was numerous mentions about where you had to put "options I am already added to the audio group for my computer and running vlc as root does not work (vlc-wrapper) regular won't run as root, i tried that because i have fixed other hardware problems by running programs as root. The laptop is a HP Pavillion dv5-1000 and has a regular sound card and a hdmi port (the sound is configured to play out of the non hdmi one)
View 1 Replies
View Related
Oct 5, 2010
Does anyone know how I can force single channel sound output? I'm deaf in one ear and want to mix the channels (especially when I need to use headphones).v
View 3 Replies
View Related
May 25, 2010
I think my question os quite silly, but yet, I can't figure out how to fix it. I had Debian Lenny installed on my laptop. While in Debian, i could control the volume of laptop speakers and headphone in separate channels. So, i could, for example, play a music in laptop speakers and in headphone, at same time.
In April, I've migrate to Kubuntu 10.04. I cannot do it any longer! There are no two separate channels in KMix. Everytime I plug headphone, it redirect the audio output from speakers to heaphone, and when i take the headphone out, it puts taudio output back to speakers. How can I control volume of each channel manually in Kubuntu 10.04?
View 1 Replies
View Related
Jan 5, 2010
openSuse v11.1linux 2.6.27.39-0.2-default x86_64realtek acl1200 codecSound for various devices is at best erratic. It is hit or miss whether sound emits at any given time.Sometimes Flash player (in Firefox) has sound, sometimes not.Sometimes mplayer has sound, sometimes not. (A workaround for mplayer is to install the ALSA dev package and rebuild mplayer. It still fails on the default channel but succeeds on ALSA.)The message in mplayer is
Code:
[AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or resource busy
"fuser /dev/dsp" returns nothing.
[code]....
View 9 Replies
View Related
Nov 13, 2010
There used to be a selector where you could set which microphone or line input should be used in KDE 3 (Kmix).
Now, in KDE 4 it is gone and I cannot figure out how to set it. i.e. to change from using an external mic to the internal mic.
View 1 Replies
View Related
Jun 25, 2011
PC seems to run fine in single channel mode but monitor reports no input in dual channel mode and memtest86+ lists from 1-3 errors per pass in single channel mode. Motherboard (Gigabyte P43T-ES3G) can't be set for the 1.65 volts required by the RAM (2x2 of OCZ3P1333LV4GK PC3 10666). The mobo voltage choices are 1.6 or 1.7 volts. I have tried both and increased the MCH voltage from 1.1 v to 1.2 v, but so far can't get it to run in dual channel mode at all and single channel mode seems to run fine but I still get errors in memtest86+. Also tried optimized Bios settings and loosened memory timings (from 7-7-7-16 to 8-8-8-27 and tRFC 60 to 70) and reset Command Rate from 0 to 2. CPU is Core 2 Quad @ 2.4 Ghz, PSU is rated at 400 watts, Video card is Gigabyte GT220.
View 2 Replies
View Related
Jun 29, 2011
I'm trying to crack my wep password just for kicks, but I keep running into the same error. When I try to use airplay-ng for the packet injection, it always gives me the error " wlan0 is on channel -1, but the AP uses channel 6". I've tried setting wlan0 to channel 6 manually, but that doesn't help. I spent a while searching for a solution, but it seemed like each page had a different, usually highly complex solution, that still doesn't work. I have the most recent drivers for my wireless card, and it meets all the requirements. So, is there any solution to this that will actually work?
View 9 Replies
View Related
Jul 14, 2011
Thinking about building a new system, with 4GB of DDR3 RAM. I am just wondering, which would you prefer: Dual-channel DDR3 or Quad-channel DDR3? Does one have better speed performance over another? Will one way keep your system cooler?
View 2 Replies
View Related
Feb 17, 2010
I spent over an hour today and over an hour last night googling and trying everything and so far no success. I found many threads with oddly similar complaints, but their solutions haven't worked for me.Last week I upgraded my system, basically a complete overhaul (in the old case). The new system is based on an ASUS MB which comes with VIA VT1708B audio onboard. I installed the latest 32-bit Linux Mint on it. The case's front audio jack doesn't work, the rear audio works but is too quiet.
Things I have tried that have not worked:Different combinations of settings in the basic sound preferences dialog, the GNOME ALSA mixer, and the PulseAudio volume control (I've probably played around with these so much that I've tried every combination)
View 8 Replies
View Related
May 25, 2010
I have two windows A and B open unmaximized such that their area overlaps with A in front. If I click window B it gets the focus as I expect, but window A stays on top of it. All my keyboard events get sent to window B correctly, but I need to click on the title bar for it to appear on top of window A. Switching windows using Alt+TAB or taskbar click works as I expect - window B will appear on top. I encountered this in 10.4, not sure if it was there before or I only noticed it now. Is this a bug or some setting somewhere I need to adjust?
View 3 Replies
View Related
Jun 8, 2010
I'm having a frustrating problem with a .sh script. It's a fairly simple script to get a volume readout in Conky. I refer to the .sh file in my Conky file as such;
[Code]...
It seems to be talking about; if [ $mute == "[on]" ] What else would it be expecting and why does it work using Front & Surround but nothing else? I've attached a pic. The volume script I'm trying to get working is just under the clock. I'd really love to get the Master volume working on this.
View 2 Replies
View Related
Sep 15, 2010
Does anyone know how to update Clamtk from 4.25 to 4.29 through Software Sources?
View 1 Replies
View Related
Sep 26, 2010
I have an htpc running mythbuntu 10.04 connected to a plasma tv via hdmi. Initially i was able to boot fine and the front end loaded ok but the resolution was off. My display is 1024x768 but my only options in myth was to use 1024x720. I have since enabled the proprietary ATI video driver. Now my desktop dispay perfect on the tv. However, i can no longer start the mythtv front end. I also ran an update that updated over 100 packages.
View 1 Replies
View Related
May 6, 2011
I have strange problem that I couldn't even find on google.
When I play any video in VLC or any other player my video is on top of everything.
For example, if I open a video and play it - everything looks ok. But, if I open another window "above" VLC, video suddenly appears at top and I can't see window opened in front of VLC.
This print-screen will make it more clear.
View 3 Replies
View Related
Aug 22, 2011
I just installed a copy of Ubuntu 11.04 yesterday on a spare computer. I'm having trouble getting the front panel of my Creative X-Fi Fatal1ty to work. The sound card works just fine when I plug my headphones into the analog stereo output in the back. I'm not trying to do anything fancy with it right now like digital optical out or anything, just trying to get the one analog output on the front panel to work so I can plug my headphones in up front and leave the speakers plugged in the back.
View 1 Replies
View Related
Jan 31, 2010
The microphone input of the soundcard itself (it is an on-board Realtek card, standard with most Nforce4 boards) works just fine. Recording quality is very good. But when I try to use the mic input on the front of my PC case, pulseaudio receives no signal from the microphone. Skype doesn't work, Audacity can't record anything either.
Everything is wired inside the case just fine, Windows XP has no problems in using the input on the front. Also the Line-out at the same panel on the front works in F12 without problems, it is just the mic input that doesn't work.
View 3 Replies
View Related
Oct 5, 2010
Is there a front end for LVM management like the "Expert Partioner" in YAST (OpenSUSE)?
View 3 Replies
View Related
