Ubuntu :: Fsck Usr Fails And Unable To Repair?
Dec 2, 2010
I am travelling so would really appreciate a few tips that should hopefully get my pc running again. (I have internet access via a kiosk, and can burn a disk if necessary, but the smaller the download the better)I have a few ideas that with some help I should be able to fix the partition.1. Is there a simple way to use use grub, to mount all partitions read only and not to fsck them so I can logon in normal user and sudo and hopefully fix the parition?or 2. Download a small version of ubuntu or something that I can burn to CD (my machine cannot boot from usb) so that I can repair the machine.3. Download the ubuntu installer (alternative) and try and reinstall the necesary usr partition?
View 7 Replies
ADVERTISEMENT
Jul 27, 2010
while rebooting the system i had supposed to go to file repair system with the problem
fsck.ext3: Unable to resolve 'LABEL=/home' FAILED.
*** An error occurred during the file system check.
*** Dropping you to a shell; the system will reboot.
*** When you leave the shell.
Give root password for maintenance (or type Control-D) (repair file system)# how do i get the system reboot
View 1 Replies
View Related
Feb 25, 2011
I need to boot in WXP just because the guys at the company don't want to update for Linux drivers in the TS so I can't connect from home unless I do it in Windows XP. But today WXP refuses to boot, when the progress bar appears, the system boots automatically. The WXP CD doesn't help, the repair console doesn't let me run chkdsk or anything (dir C: gives an error about listing addresses or something like that). Is there any way to use fsck or anything in Linux to repair the WXP NTFS partition?
View 1 Replies
View Related
Feb 28, 2011
I have errors on my encrypted ext3 root partition. If I try to repair it there is a warning:
fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
/dev/mapper/nb181-root is mounted.
[Code].....
View 1 Replies
View Related
Sep 7, 2010
I was working on my RHEL 5.2 workstation yesterday when the OS became flakey. first I noticed that some software that I had running was outputting and error that it was unable to write to log file because permission was denied - I've never seen this output before- it would have been writing to my home dir running under my user name. From an open terminal, i did "ls -al" and saw that many of the permissions the files in my home dir were listed as "????????" some were still "rwxrwxrwx", as well, many files were highlighted in the colors set for links and root privileges.
I tried to start a new terminal, and it failed. then Gnome crashed. When I reset the Machine, I got through grub, and into the startup, and after finding the Volumes, the startup failed with a Kernel panic:
giving several errors- like:
I dont have much experiencie with this stuff, but it looks obvious that somethig like the MBR or wherever the partion information is stored might have been corrupted.
What I dont understand is why I can get into GRUB (its a dual boot Windows Vista, RHEL machine). I'm guessing that this means its not a mechanical problem, because I can get RHEL to begin to boot which i think is failing somewhere around the /etc/rc.d/re.sysinit script, and also can get Vista to bring up the inital windows screen and a mouse pointer on spanning both of my screens which i think means that it must have at least loaded my ati drivers for my dual head radeon 4850. windows hangs there however.
I've tried the RHEL 5.2 rescue disc, and it doesn't recognize any Linux partitions.
I ran the system diagnostics out of the dell bios and it came back with a failed HDD : Error code 0142, but from digging around a bit I've found that this is a very broad diagnosis.
My concern over it being a mechanical problem is that I'm not sure that I want to try to run any further diagnostics, or any of the disk utility programs that i've seen listed here on linuxquestions, as it might damage it further, and there is some data that i would really like to get off this disk.
View 7 Replies
View Related
Apr 26, 2010
I use Redhat 2 server, the server suddenly can't boot now , it goes to the grub> mode, it can't boot to Redhat kernel
View 5 Replies
View Related
Nov 12, 2010
16GB RAI've been running the Debian-based Proxmox VE on it for six months or so with no problems.Today I loaded Centos 5.5 x64. During a reboot, the file system crashed and fsck couldn't repair.I loaded it again, did all the updates, and loaded my applications. On about the third reboot, it crashed again and fsck couldn't fix it.I don't really know where to begin. I doubt seriously that any hardware has went bad since yesterday.
View 1 Replies
View Related
Dec 30, 2010
I've just migrated to Debian from Ubuntu on my server. So my first post here. I've had some problems and questions when installing and configuring Debian, now everything seems very smooth, but still I can't find answer to one question. My machine is headless and I allways use SSH to it. I have several partitions on machine so if one of them fails on booting time with fsck, I need to press CTRL+D combination to continue. In that case I need to go to the machine with monitor and keyboard and press that combination. Is there any way to automatically continue for example after 30 seconds ? Then I could log in to the system and check log files what is wrong. How can I do that ?
View 2 Replies
View Related
Apr 5, 2010
I have a 2TB file-system and when the machine reboots it fails the fsck, halts and goes into maintenance mode.Stats: I have have RHEL 5, 2.6.18 kernel, the file-system is an ext3. The file-system is on an EMC AX4 connected with fiber channel HBA.So far my reading tells me this should work because under 2.6 4TB is OK. Any ideas why this fails?If I take it out of the fstab file and mount it manually the boot is OK and the file-system behaves well. I can change the fsck check option in the fstab to 0 but I don't think I should have too. Everything I read says that 2TB ext3 file-systems are OK.
View 5 Replies
View Related
Sep 15, 2010
I am attempting to run a fsck on a number of large ext3 filesystems. I am doing this proactively because I want to minimize reboot time and the filesystems are past the interval time of 6 months. When I run the command " fsck -f -y device" I get the following error on all of the filesystems-
fsck 1.39 (29-May-2006)
e2fsck 1.39 (29-May-2006)
fsck.ext3: Device or resource busy while trying to open /dev/mapper/mpath0p1
[code]....
View 2 Replies
View Related
Feb 23, 2010
both root and home partition have suddenly become corrupt, and the repair tool from the installation disk just loops (Do you want to repair? Yes! Do you want to repair? Yes! Do you...).
Code:
[ 54.209685] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 54.209758] ata1.00: irq_stat 0x40000008
[code]....
View 9 Replies
View Related
Jan 24, 2011
Seems like I misplaced this topic. Should have been in general help. Sorry! Any moderator feel free to move this topic. As I was creating a swap partition, something went wrong and I ended creating a much bigger file which consumed all my empty space. Ubuntu stopped working and now I can't seem to fsck / mount my disk. Currently I'm on a live cd. fsck will give:
Code:
e2fsck 1.41.12 (17-May-2010)
fsck.ext4: Device or resource busy while trying to open /dev/sda2
Filesystem mounted or opened exclusively by another program?
However, the file system is not mounted.
[Code]...
View 3 Replies
View Related
Sep 25, 2009
When I do a forced fsck, I would like to have a log file to look at after boot.
When I check /var/log/ there are no files there with fsck output
I've run force fsck in these ways:
shutdown -rF now
-and-
touch /forcefsck
View 1 Replies
View Related
Apr 1, 2011
Fstab:
UUID = A / ext4 defaults 1 1
UUID = B /stor ext4 defaults 1 2
UUID = C swap swap defaults 0 0
and the error is:
fsck.ext4: Unable to resolve UUID = B.
Fdisk -l:
/dev/sda1 (boot) linux
/dev/sda2 linux swap solaris
/dev/sda3 linux
[code]...
View 4 Replies
View Related
May 8, 2011
I downloaded ubuntu 10.10 iso, made CD, installed as dual-boot with win Vista home premium and used it for a week to access the 'net and email. Yesterday, while deleting an email, the "d" key stuck down while I was issuing <CTRL>D and the cursor froze. I then rebooted by using the reset button and saw many lines of text including "kernel panic". so I reset and booted into 'repair boot'. Again, many lines of text which stop at the same place if I try this twice.
I assume I've fried my ubuntu install and would like to fix or re-install it. When I installed it, I let the [wubi?] installer make decisions except choice of drive because it picked the external, USB drive. It appears to've used about 80 G on internal drive D: I could boot from the distro CD and see if it will re-install but I'm concerned that I may not fix my problem or that it may mess up my windows installation.
View 3 Replies
View Related
Jun 24, 2011
Upon booting my LVM wheezy setup, I get
fsck.ext3: Unable to resolve 'UUID=theUUID'
where "theUUID" (without the quotes) is the UUID
I believe this is caused by me trying to get lvm to use the external /boot because when I had unmounted the external /boot, it was creating a /boot in root. So, I booted a live cd and mounted the external /boot where /boot in the root volume is supposed to be. Basically, I think the problem is that I need to make my /boot (which is the only ext3 partition in the entire system and I want it that way) "relate itself" to the lvm root so that it boots into the system. As mentioned earlier, in the live CD, I made the external /boot mount itself in the root's /boot but I don't know how to tell the system to do this on its own while booting without my assistance. I chrooted from the live cd which involved a lot of tedious stuff but basically the important stuff I did were:
grub-install /dev/sdb
update-grub
update-initramfs -u
P.S.I get the issue in the Subject of this topic by telling tune2fs to mark the external /boot, lvm / and /home partitions as "dirty."
View 2 Replies
View Related
Sep 23, 2010
I've used rEFIt and to create a dual boot system on a new MacBook Pro 7. 1 following the directions in the community forum. I can book ubuntu and mac os x fine. However, the MBR boot table shows an error in the partition map.
[Code]...
How can I fix this, rEFIt and gptsync are unable to repair the MBR error... Will this cause problems (since MBR shows the ubuntu boot partition overlapping the OSX partition)?
View 2 Replies
View Related
Nov 10, 2010
i know i asked earlier but i got my usb to be mounted on a different fedora distro. how do i now find my documents or repair it? also how do i add in a repair line if possible?
View 2 Replies
View Related
Aug 8, 2011
Is there any way to repair gnewsense? It was working fine but the desktop has suddenly started showing problems. I am not able to use the desktop, instead i am stuck to use only the terminal
View 13 Replies
View Related
May 15, 2011
I have $ uname -a
Linux kub 2.6.32-5-amd64 #1 SMP Mon Mar 7 21:35:22 UTC 2011 x86_64 GNU/Linux
Most of the time when I boot my PC I get an error about fsck.ext4: Unable to resolve... I don't know why it's happening.
The problem is happening with my external drive that has 3 partitions:
/dev/sdc1
/dev/sdc3
/dev/sdc2
About 90% of the time I boot I do get the error. Sometimes after getting the error I can login and the external drive (/dev/sdc) is already mounted:
$ df -H
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 15G 8.0G 5.8G 58% /
tmpfs 1.9G 0 1.9G 0% /lib/init/rw
udev 1.9G 246k 1.9G 1% /dev
tmpfs 1.9G 738k 1.9G 1% /dev/shm
code....
The UUID's in the error file match the output of the command blkid. And the UID's of blkid match the fstab UUID's. I don't know what to do at this point.
View 2 Replies
View Related
Jul 22, 2010
Can anybody tell me what kind of fsck errors are found on a system?
View 5 Replies
View Related
Apr 24, 2010
Ubuntu 9.10 comes with rt2870, the driver for my Zonet ZEW2545, and I have had to blacklist rt2800usb in /etc/modprobe.d/blacklist.conf in order for rt2870 to work. My network adapter is able to attempt to connect to my router, but after 10-40 seconds it tells me I am disconnected again. This adapter works fine on windows.
View 1 Replies
View Related
Jun 23, 2010
I can't configure Bluetooth in Slackware 13.1. It basically works. I can scan my mobile phone:
Code:
$ hcitool scan
Scanning ...
BA:BE:DE:AD:AB:ED Nokia 6300
But when I try other commands, mobile phone asks me about passcode. Because I don't know it pairing fails:
Code:
$ gammu 6300 --identify
Error opening device. Unknown, busy or no permissions.
On the other hand when I try to pair computer using mobile phone it doesn't find any device.
Code:
Pair new device
Searching for devices
No devices found
In Slackware 13.0 to configure Bluetooth it was enough to edit /etc/bluetooth/hcid.conf file. In Slackware 13.1 there is no such file. I tried to use blueman but it offers first and foremost a lot of error messages. In despair I even started KDE and tried Bluetooth Manager. It attempts to run for a dozen or so of second and finally fails. I did full installation of Slackware 13.1 and I use generic SMP kernel.
View 6 Replies
View Related
Apr 29, 2009
It seemed that it would be simple enough: take the 'f' option in the expert menu of fdisk to put partitions in order after a gap had been created by a deleted partition and then make corresponding changes in /boot/grub/grub.conf because the root partition was shifted.
Well, it didn't work out that way. No matter what I try, I either see the error 15 at Stage1.5 or the error 28, which is even stranger (file does not fit into memory). All this before I even see a grub menu. It just does not get that far.
Does anyone want to take as stab at guessing what might have happened here and whether I have a chance at recovering without having to reinstall? I can provide concrete data, if anyone would be kind to give it a try. Hoping that this is a known problem and something can be guessed from what I stated here but I can be as specific as needed, just don't want to generate noise if there are no takers.
View 3 Replies
View Related
Jun 12, 2010
its not a good idea to run fsck on a mounted file system.But.. if I want to check the file system between the default checks on boot up how should I safely do it? How do I safely run fsck?
View 8 Replies
View Related
Mar 3, 2010
I forced a fsck on the next boot by.Code: sudo touch /forcefsck.Where did the results go?/var/log/fsck/checkfs and /var/log/fsck/checkroot both read "(Nothing has been logged yet.)" Am I to assume that if there are no errors nothing is written to the log files?
View 9 Replies
View Related
Jun 29, 2010
Every 32 boot ups, the fsck runs automaticall on my drives.Iould like it to run at shutdown and was looking for a solution.I saw an app call autofsck but not find it in synaptic.Can someone help me find a solution to this. I am running a laptop with 9.10 and a desktop with 8.10.
View 3 Replies
View Related
Aug 24, 2009
i'm running fedora 10 Gnome ver 2.24.3 kernel 2.6.30.4
i tried to change my /etc/gdm/custom.conf by adding it the following lines:
[daemon]
TimedLoginEnable=true
TimedLogin=your_mike
TimedLoginDelay=0
after reloading gnome it's trying to log through "autologin" but than it give an error message "Unable to authenticate user", i tried using passwd -d on my account but still the error persisted, i saw that some users had this error after a fresh install just with logging into the machine without relation to autologin and they needed to change their password first i tried that as well.
i also tried to edit the /etc/gdm/gdm.schemas file
<schema>
<key>daemon/AutomaticLoginEnable</key>
<signature>b</signature>
<default>true</default> <schema>
<key>daemon/AutomaticLogin</key>
code....
But unfortunately the results were the same, i tried this procedure on a different Fedora 7 and on a virtual ubunto 9.4 machine and is was successful.
View 10 Replies
View Related
May 9, 2010
I am using bootchart to investigate the slow booting of ubuntu 10.04 and I found that fsck process is called every time in the booting for around 5 seconds even the screen does not show any hard disk checking, is that normal ?
View 5 Replies
View Related
Aug 24, 2010
I booted up my laptop and the boot sequence got stuck at the boot splash screen (plymouth). I did an esc and I saw a failure message, the error I remember in my panic mode is: fsck terminated with status 8
I rebooted, got the same message. Rebooted again and this time, to my relief, it worked.
1) What happened, should I be concerned? Not sure why it worked after 2 reboots.
2) Is there a possibility this could happen again?
3) Are there any boot log files I could look at?
4) Is there anything I can do to fix this? Or a check of some sort?
I'm using Ubuntu 10.04 on a Dell Studio 1535 laptop. No dual boot. The disk is partitioned and I've got my /home folder on the other partition for situations like this.
View 2 Replies
View Related
