Ubuntu :: Floppy - "media Not Detected" The Mount Command Doesn't Emit Error
Apr 14, 2010
fsck /dev/fd0 does work properly with no error, emitting correct data on files on the fd. However, sudo mount -t msdos /dev/fd0 /media/floppy0 nor Palimpset GUI tool don't work for the fd disk. The GUI tool says "media not detected." The mount command doesn't emit error, it just normally(?) ends with silence indicating something which I do not understand. The floppy doesn't get mounted.
/etc/fstab has the entry:
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
What could be the cause and the solution for my poor little floppy disk problem?
View 9 Replies
ADVERTISEMENT
Dec 17, 2010
every time i try to mount the floppy drive it tells me there is no media in the drive
View 14 Replies
View Related
Jul 7, 2011
I have just tried to mount my floppy with: mount -t auto -o uid=1000,gid=100 /dev/fd0 /media/floppy and get for response : cannot execute command '' mount -t auto -o uid=1000,gid=100 /dev/fd0 /media/floppy error 127
What is supposed to be done to get my floppy mounted?
View 9 Replies
View Related
Sep 23, 2009
I am having a Promise TX4650 RAID controller & trying to create a driver floppy for installing the drivers. Also am using RHEL 5, I can create the driver floppy, but when I type "mount /dev/fd0 /media/floppy" I get error: "mount: mount point /media/floppy does not exist".Can I get the files in a format other than the ext2 floppy image, so that we do not need to use a floppy drive?There is a readme file inside the driver archive & you can use that as a reference.
View 2 Replies
View Related
Feb 13, 2010
Just moved to Ubuntu from XP. Whole process has gone very smoothly, but left with a small problem (i.e. it isn't actually affecting usability) that I don't seem to be able to fix and can't find on forums/internet. I also have a problem with the Floppy drive, but I've seen that problem elsewhere in the forums.
It's a dual boot system with both NTFS and Ext4 drives. All are visible and fully accessible. I decided to convert one of the NTFS drive to Ext4. That appeared to be successful and was successfully remounted as an Ext4 drive. The drive label is "Data". I did have a bit of a problem getting it remounted so that I could see/use it under my log-in as opposed to just under root. It's at this point I think that I did something to create the problem.
I now have two entries for "Data" in drop down menu for Places. The true one is shown as a standard hard drive icon, but the false one is shown as a different icon - possibly an external drive icon (note that the floppy drive is also showing as the same icon and I can't access that, but I've seen that's a problem elsewhere in the forums).
I can write and read to the true "Data" hard drive. If I click on the other false "Data" icon, I get the message "mount: /dev/sdd1 already mounted or /media/Data busy mount: according to mtab, /dev/sdd1 is already mounted on /media/Data". If unmount the true drive and try to mount the false drive, the system mounts the true drive instead. If I log into nautilus as root, neither the false data drive or the floppy appear in the left hand panel.
View 9 Replies
View Related
Jul 6, 2010
I'm using Fedora 12, and I want to mount/unmount my USB memory stick from the command line. I know I could edit /etc/fstab and so on, but I want to emulate what happens when you mount using the GUI (I use KDE and the device notifier), that is, I want to be able to do this as an unprivileged user and not have to know the mount point exists in advance.
I'm sure in older versions of Fedora there was a command something like `gnome-user-mount' which let me do this knowing only the filesystem label... What is the current equivalent?
View 5 Replies
View Related
Feb 27, 2011
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
View 4 Replies
View Related
Feb 21, 2011
Been using Ubuntu to extend the life of my hard drive. I'm not very familiar with the inner workings of Linux, but I know computers well.
My System:
- Ubuntu 10.04, gnome environment. Dual boot XP.
Problem:
- my external drive, WD essentials 2.2 TB, stopped working recently, about 6 months after installation of dual boot.
Facts:
- still detected, though SMART does not detect it.
- XP still detects it - cant access files though. *
- Ubuntu now detects a floppy drive, which I do not have.
- power still working.
- have tried a few different USB cables.
- happened around the time of several software updates. Maybe paranoia.
- had trouble with music playback.
Hypothesis:
- Drive is dying, cuz XP wont allow me in. *
- Something happened and it rolled back the drivers on the External HD.
- Somehow losing Voltage, though I dont know how. **
Have attempted:
- Disabling Floppy from bios.
- In Windows: disabling XP service pack 3, disabling Firewire 1394.
- Different USB cables. **
- Disconnecting all USB devices, except External HD. **
View 7 Replies
View Related
Apr 3, 2010
I have just installed SUSE 11.2 on a spare Hard Drive, on a machine that runs SUSE 11.1 with no probs. There is not a floppy icon on the desktop in 11.2, if I put a disk in the drive & right click on floppy drive in home, then click detect media - the floppy light comes on for a short while, but nothing else. There was not an entry in fstab for floppy,so I added -/dev/fd0 /media/floppy auto noauto,user,sync 0 0 rebooted & tried again, no difference. The drive is OK on the same machine running SUSE 11.1
View 1 Replies
View Related
Mar 2, 2011
I'm using the ./livecd-iso-to-disk.sh script to create a bootable usb. Now in the arguments you're supposed to indicate a partition name. But my usb device gets auto-mounted to /media. And if I try to pass in /dev/sdb it gives me a "no media detected" message. What do?
View 3 Replies
View Related
Sep 1, 2011
I am working on an old PC and I am trying to mount a floppy disk. The disk is formatted as Fat12 with Quote: mkdosfs -F 12 /dev/fd0 Weather it auto mounts or I mount it with sudo mount Quote: /dev/fd0 /media/floppy0
it says it works fine, but if I add files to it,remove the disk and put it in another machine nothing is on the disk. The files I add to the disk just get added to /media/floppy0 as a normal directory. If I try to umount /dev/fd0 it says the device is not mounted, even directly after I mount it.
View 8 Replies
View Related
Mar 27, 2010
I've looked at a couple of threads on this subject but can't cure my Pb. I have a floppy drive that I rarely use. Last time was on an earlier version of FC without problems.
View 8 Replies
View Related
Sep 8, 2011
I need to read and write to a 3.5 floppy diskette. My one computer has a floppy drive. I did a search on this question, but the material that came up was ancient. There is no /dev/fd0 anymore. How can I mount a floppy?On this computer with the floppy drive I'm running F12 and kernel 2.6.32.26-175.fc12.i686.PAE. My computer running F14 does not have a floppy drive.
View 3 Replies
View Related
Apr 27, 2011
I used the ntfs-config utility to mount my windows drives automatically at startup. While doing so, I had my USB-HDD still attached, and after making changes and rebooting, it did something unknown I didn't expect and I cannot mount my USB-HDD again, and it gives me the following error message:
Error mounting: mount exited with exit code 1: helper failed with:
mount: only root can mount /dev/sdb1 on /media/MyUSBDrive
I did manage to open it somehow, but then all the data was erased apart from ~3 GiB [edit: it's got some kind of extra drive built-in which is mounted as a CD-ROM drive, and when I open that one first all the files are missing in the actual drive, otherwise I get the message above]. I don't know what information I should include here, but my fstab looks like this:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]....
This line in terminal:
sudo mount -t ntfs-3g /dev/sdb1 /media/sdb1
Gives:
fuse: failed to access mountpoint /media/sdb1: No such file or directory
What should I do to recover my files and fix the mount error? [edit: at the very least, how do I backup my files onto my internal HDD so I can format it and recover it in this manner]
View 6 Replies
View Related
Aug 6, 2010
I have an external usb connected floppy drive that I cannot mount.#fdisk -1 does not show the drive, in my ignorance I thought that it being a usb it would be recognized the same as flash drives and my external usb ide hdd are recognized.The drive does work, I have tested it in windows computers.Does the floppy need special settings?This may be related or it may be another issue totally:The floppy is recognized in gparted although I cannot format the disc to fat16 or fat 32 as they are greyed out.
View 5 Replies
View Related
Jan 4, 2011
I have recently installed Xbuntu on my old laptop (An IBM iSeries 2621) - yes its an old piece of kit with a USB 1.0 port, a cd-drive and an internal floppy.My problem is that even though removable media are set to auto-mount in the settings; when I put a floppy disk in, or a CD-ROM, they do not auto-mount so I cant access the disks (the laptop does not have wireless (or even an rj45 port!! - it only has an internal 56k modem) - hence why I REALLY need to get the CD-ROM working and recognised by Xbuntu as I have burned some packages that id like to install to CD-ROM. (a working floppy would definately be a bonus as id like to save my documents there)
View 4 Replies
View Related
Sep 3, 2010
I've been considering erasing Windows off my hard disk to gain some space, but until then, I want to know that I can do everything I'll want to do.
I've followed many tutorials and threads on the internet, but they never work for me. I added several files to a floppy in Windows, and the floppy works fine in all the Windows computers I've tried. However, when I boot into Ubuntu 10.04, I click on the Floppy Drive in nautilus, but it says "Unable to mount location. No media in drive." From the terminal, it seems that I can mount the floppy (no error message, and the floppy drive clicks), but when I navigate to a folder in /mnt or /media, the folder is empty.
View 6 Replies
View Related
Mar 14, 2011
Just installed 64 bit Squeeze on a new build system Athlon quad core 3 GHz and 4 GB of ddr3 in a Gygabyte GA-870A-UD3 rev 2.1 mobo and I can't mount the floppy disk. The onboard controller is an ITE IT8720 chip. The floppy is a generic internal drive - Sony I think.I know the hardware is ok as various versions of Puppy linux mount and unmount it ok and.When I saved I got the message "Unable to mount floppy dev/fd0 is not a valid block device" editing back and saving got "Unable to mount floppy0 dev/fd0 is not a valid block device".Can anyone point me in the right direction?
View 4 Replies
View Related
Jun 17, 2009
I had this all hashed out in previous versions of Fedora, but since I have moved the Mrs over to F10 this problem has come to the surface yet again.The Mrs is a strait user. She does not do command line and there is not a chance in a hot place that I could convince her to do it. Now we have her on the F10 system and we, once again, can't get her to have the right Kung Fu to be able to moun/unmount the floppy drive using the computer icon on the Gnome desktop.
What has changed and how do I get this function back for her? She uses this for business files, so this is somewhat on the urgent side.
View 14 Replies
View Related
Jan 17, 2011
This probably is something simple, and may have already been addressed on here.I have a 1.4MB floppy disk image file that I would like to mount as a drive.
View 5 Replies
View Related
Jul 22, 2010
The system is 11.1 32 bit and used to work ok
All the drives function and mount normally under Parted Magic.
Sometimes a cd will mount after 15 mins or so but if it is ejected it will not remount. after that event the dmesg output is 3 times as long. As it is 35K chrs long it is too long to post!
I have changed hardware and cables with no effect.
I have run the repair option on the install disk. I get a cannot find floppy error
It also reports cups, hal, ntp & postfix as errors but if I select repair it still returns the same next time I run the repair routine.
It also says the bootloader is faulty if I select repair I go into an infinite loop so I exit with skip. Anyway the system boots ok and runs just fine apart from the cd/fdd/usb problem
View 3 Replies
View Related
Sep 11, 2011
I am trying to configure my test Squeze install on an older PC with LXDE desktop, and I can't seem to find anything which would enable me to mount a floppy.Then I tried to use the konsole as root mount -w /dev/fd0 /media/floppy0
But although this device and this mount point exist, nothing is mounted. I double checked with various floppies which I know have data on them and none of them are being mounted. The umount command would I expect be umount /media/floppy0 /dev/fd0...I tried searching the web and this forum and didn't find anything helpful. Can anyone help?
View 2 Replies
View Related
Aug 14, 2010
i have read how mount floppy image (*.img) but how edit by adding files?
View 4 Replies
View Related
Feb 23, 2009
Anybody knows how can I mount and unmount a floppy within the desktop and/or dolphin filemanager in KDE 4.1? If I run dolphin I can see a floppy icon on the left, clicking on it seems to activate a reading of the floppy, then I have to go to /media folder and click on /disk folder to display the floppy files, then if a right click on the floppy on dolphin the only option I get is to hide the floppy shortcut, there is no option for unmount the floppy. I tried to make a desktop shortcut to floppy by right clicking on the desktop folder and selecting new device floppy and entering /dev/fd0 on device location, and clicking okay. Even that does not have the unmount command when I right click on the desktop shortcut, so the floppy gets stock in mount state.
also I dont see an applet or the so called plasmanoid when I click on the plasma icon on the right of the task bar and click add widget, on kde 3.5 I have the media applet on the task bar, it worked like a charm, I give a 1000 thanks to the developer of the media applet.
Any ideas on how to mount and unmount my floppy? It is a standard internal floppy, which is connected to the standard floppy controller on the motherboard. The only way to have access to it is logging into kde 3.5 and have the media applet/widget in the taskbar, and then works like a charm, I can mount it or unmount it any time. But I would like to try the new Version 4.1.3 (KDE 4.1.3) "release 72.4" that I'm running. I believe this is the latest from the opensuse 11.1 KDE 4 STABLE repository, so I know I have the latest patches for KDE 4.
View 6 Replies
View Related
Jun 25, 2011
I am using 11.3 on one machine and 11.2 on the other (a netbook). 11.4 won't install on either and 11.3 on the netbook fails to install as well.
I am using the same setup as I have always used when both systems ran 11.2 (details below) but now I can only mount a drive in one direction. In the other direction the mount command gets stuck with no error message until it eventually times out. I can ping and ssh the machines from each other without difficulty.
Even in the direction in which the mount apparently works (11.2 mounting a drive on the 11.3 machine) when I try to copy files across nothing actually happens.
exportfs -a was run successfully on the exporting machine, and nfsserver is running on both machines as does nfs client.
The exporting machine is 192.168.1.102 (eeelinux) and the other machine is 192.168.1.101 (nina).
Details:
The /etc/exports file on the exporting machine (192.168.1.102) looks like this:
eeelinux:/home/naima # more /etc/exports
# See the exports(5) manpage for a description of the syntax of this file.
# This file contains a list of all directories that are to be exported to
# other computers via NFS (Network File System).
[Code].....
View 9 Replies
View Related
Jul 29, 2011
After installing 11.4 my fstab entries for CD and DVD drives as well as floppy generate errors when I try to mount them automatically or via Nautilus when inserting CD or DVD. The icons and CD/DVD name show up ok but will not mount. Manually mounting via terminal command works. Here are the relevant lines from fstab
[Code]...
In /dev scd0 and scd1 are symlinks pointing to sr0 and sr1 respectively. The above error message was generated after attempting to load a CD in scd0 i.e. my laptop internal CD/DVD drive. Lines 10,11 and 12 are the fstab lines quoted above.
View 6 Replies
View Related
Jan 27, 2010
I have installed Windows7,and Redhat9 next installed but set as default.Problems:- Sound card is not detected using sound card detector.(I faced no such problem when i had installed Fedora3,and Fedora11) -Modem is not detected too when querying modem. -Could not find in PC (when Fedora was installed)or find and download needed codec packs and plugins so nearly most media could not be played.
View 1 Replies
View Related
May 18, 2011
I just upgraded Xubuntu from 10.04 LTS to 11.04 and I am no longer able to mount removable media from the "places" menu. The message I get:
"Failed to execute child process exo-mount (No such file or directory)"
I assume some wrapper process is attempting to execute a program called "exo-mount," but no such program exists anywhere in the repositories, according to a search with apt-file. The "exo-utils" package used to contain exo-mount, but the program no longer exists in that package.
Mounting from within Thunar works fine.
View 3 Replies
View Related
Dec 13, 2009
Is there something weird about the FLOPPY DRIVE on F12? Nothing associated with it works & I can't get an icon for it. Also the FLOPPY FORMATTER no longer works. (mine is an internal drive)- I had some really miner quirks with it in 10 but it worked. I had some workaround launchers that I used until an upgrade semi-fixed it. (It would give a false error that it couldn't run but did. I just ignored it.)
I tried to edit FSTAB to cure a problem of my BACKUP drive showing up twice*** so while I was in there I added the stuff for the floppy & it still doesn't work. If I try to mount it manually, I get the error that /dev/fd0 doesn't exist.I tried to find some info on it & it SEEMS that there MAY be a bug but I'm not sure as the info is a bit confusing as to just what version & such they are talking about. And there was also the problem that all the stuff seemed to be OLD or not related to my problem.I why I quite hacking at my system, is that all my workaround launchers & the formatter say that there are GNOME things missing & they can't run. So I figure that there is something missing or screwy already & that I'd better ask BEFORE I make things worse or actually break something.With the fact that floppies are about gone, it's getting to be not that big of a deal but I still find myself having to use them for repair purposes (albeit, not as much) & it gets to be a bit of a pain to fire up M$ just to do something like this.
*** It appears that the one in FSTAB was the one I needed, so where would the OTHER one be so I can get rid of it? Or at least make it auto mount.
View 12 Replies
View Related
Feb 19, 2010
I am trying to write a floppy boot image to my floppy drive (as root):
Code:
dd if=boot.img of=/dev/fd0
dd: opening `/dev/fd0': Read-only file system
[code]....
View 8 Replies
View Related
