I manage to ssh in server ok but when it opens i,m in file system is this correct seems abit vunrable? I would of expected to go to specific folder i.e a shared folder, if this is how it is then so be it
View 6 Replies
I installed
Ubuntu-11.04-beta1-desktop-i386
Ubuntu-10.10-netbook-i386
From windows 7 i select to install on same windows7 partition after installation i select ubuntu and it start up to complete the installation put i get a message: "No root file system please correct this from the partitiong"
I reinstall again on a vartual machine with windows 7 it worked ok;
I installed it with other pc with windows xp it worked ok
I installed on another labtop the same problem occured.
From Ubuntu 11.04 installer. What does this mean? how do I do it correctly?
View 11 Replies View RelatedI have installed ubuntu onto a 64 bit Windows 7 machine using Wubi. [Note: I thought that I was downloading 10.10, but the installer said it was 10.04] When Wubi gave be a choice of which drive to install on, I choose my second drive (B) My Windows 7 resides on (C)
The install seemed to take a long time, but I think that was because it was downloading the whole operating system install files. When it was finished downloading it asked me if I wanted to reboot, I selected yes (reboot). Then the boot screen gave me the choice: Windows or Ubuntu. I choose Ubuntu and then I get the error:
"No root File system is defined. correct this from the partitioning menu."
Damn that Ubuntu splash screen was so beautiful and I thought I was home free. I have read a few threads here and other places on line. I have read that I may have to partition the drive. Was my mistake in choosing the B: instead of the C: drive? If I partition can I partition from inside windows using the computer management software it provides? Do I need to partition at all? Or can I just move the installed files to the C: Are the files movable? In the ubuntu directory I see a file: uninstall-wubi.exe. Should I use this and try a reinstall onto the C:
I am running Ubuntu 11. 04 on my 160gb HD, which is making funny noises and could be on its way out. I have in my PC a 500gb HD on which I would like to install 11.04, but, althogh the dis has installed OK on my laptop, and on my 160HD on my desktop, it will not install on my 500gbHD, everytime I try I get the message "no root file system is defined, please correct this from the partitioning menu"
Snapshot of my drive............................
Screenshot.jpg
How do I partition it.
I installed Ubuntu version 8.04 (Hardy) on my P4 3.4 GHz PC but it was so unstable with daily kernel crashes that I was forced to go back to XP. This year, I�m building a HTPC using an old but unused Abit AN-M2HD, a brand new Athlon 5600+ Brisbane CPU, new 2TB Seagate HD, new G.Skill 8 GB DDR2 PC8500 1066 RAM and a wireless keyboard.
The HTPC will be a server hub with my laptop and P4 still using XP. It will be used for surfing the web, playing games and maybe to record Blueray movies (is that even possible?). I will search the forums for how to make my HTPC the server hub but I�m posting here because I want to try Ubuntu again. I am torn between an older version 7.00 or 6.00 which matches the vintage of my hardware or a new version that can potentially be unstable again.
I just dloaded ubuntu 10.04 iso, i used firefox and on the way i had to pause n start for about 5 times, when i burned the iso with brasero and booted from it I got an error, but recently I have burned discs with my burner and they never work. So how do i check if the iso is correct or not
View 9 Replies View RelatedI ssh into a ubuntu box with username "ubuntu" and I can become root without entering a password via "sudo su". How can I scp files onto this box using the ubuntu@ username? It does not allow me to do so using root@. The error is:scp: /etc/: Permission denied.
View 2 Replies View RelatedWhat's the correct way to shutdown system while apt-get is still running? apt-get complains about unclean shutdown when I just shutdown computer.
View 2 Replies View RelatedHow I setup my NetworkManager to use the correct host name on my system, if that is possible. NetworkManager ignores the specified hostname and uses 'localhost', which is a bit annoying.
View 9 Replies View RelatedI have adjust the clock to my country current time but after a reboot,all the setting is gone. How to permanently setting the correct time?I have select my country region.
View 2 Replies View RelatedI have bash script for converting files. I have a problem. If file name is "corrupted" then mv command for that file will not work. For example file with "-" in front of the name.
Is there a way to check if in some folder (subfolder) all the files have correct file names or they don't?
If they are all correct -> OK proceed with execution of the script!
If they are not all correct -> NOT OK stop with execution of the script!
I am using embedded Linux. File open is successful. The file has all the permissions. It is present in current directory too. The size is about 27KB. But s.st_size says it is zero.
inputFileName = "abc.mp3";
FILE* inFile = NULL;
inFile = fopen(inputFileName, "r+b");
[code]...
When I learn shell script, I want to add my own PATH variable to system previous variables. I find that my linux has the below PATH variables (in the end of this message). It shows 'No such file or directory' although I verify that all the directories exist. Some directories are empty indeed. This will result that warning?
I want to make the present PATH variables correct before I add mine.
bash: /usr/lib/mpi/gcc/openmpi/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/jvm/jre/bin: No such file or directory
I was unable to find an answer to something that (I think) should be simple:
If you go here: [URL]
like so:
wget [URL]
you'll probably end up with a file called "download_script.php?src_id=9750"
But I want it to be called "molokai.vim", which is what would happen if I used a browser to download this file.
Question: what options do I need to specify for wget for the desired effect?
I'd also be ok with a curl command.
I bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.
"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"
Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).
My Redhat Enterprise Linux 4 with 6x partitions (/, /boot,/home, /usr, /var, /tmp) of 6.0 GB IDE Hardisk was working quite fine. I decided to create LVM on /home and /var partitions but due to some errors occured and I delete the /home partitions. That's why partition table altered. I then delete 4,5,and 6th partitions (/home, /var, /tmp) partitions and now try to create one by one but following error is coming:-
[Code]....
The Super block could not be read or do not describe a clear ext2 file system. E2fsck b 8193 <device> I have tried following commands,but could not successful:- e2fsck -p /dev/hda7 (where hda7 was created but afterthat it was deleted) e2fsck -a /dev/hda7
Have just assembled a new computer and thought I would install the 64 bit version of openSUSE 11.2 in a "Windows free zone". After a hiccup or two I have managed to get a system of sorts running but on trying to copy files from my old computer(via a memory stick) it tells me that Vfat is an unknown file system.On my old computer I am running 32 bit openSUSE 11.2 as a dual boot system with Windows XP and have no problems moving files between the two different file systems.Is it possible to get a 64 bit file system to read 32 bit file system drives and if so how do I do it?
View 7 Replies View RelatedHow to convert FAT file system to NTFS file system via Ubuntu,are there any commands to do this task?
View 2 Replies View RelatedI tried to use systemtap but it complains about:
Code:
semantic error: missing x86_64 kernel/module debuginfo under '/lib/modules/2.6.34.7-0.7-desktop/build'...
[code]....
I'm a little bit confused with partitioning the filesystem in Linux. the difference between creating the file system with fdisk and mkfs (when formatting the disk). I can't clearly tell my problem, so please look at this picture:
View 2 Replies View RelatedWhenever I boot my fedora 12, even before asking me for my login name, etc., there comes a message saying "Can't update IECauthority file : /var/gdb/.IECauthority" and hangs at the place. Even the mouse doesn't move. If I were able to open the terminal somehow, perhaps by changing the file permissions, I could get something. Also, when I boot from ubuntu 9.10 and try seeing what's in the /var directory of fedora, it doesn't show anything, even if I display the hidden files. If the directory gdb doesn't exist, why is it showing the error ?
View 7 Replies View Relatedi have generated .exe file from C file (ie filename.c ) after compiling in linux machine with -O option. I wish to know about how to run that .exe file when linux system starts up ?
View 3 Replies View RelatedIn System Monitor, on the File Systems tab, the "Total", "Available" and "Used" columns don't seem to add up, and the "Used" percentage doesn't seem correct either.
My config:
/dev/sda1 = 80 GB SSD drive, / partition.
/dev/sdb1 = 50 GB FAT32 partition of an external 500 GB USB hard disk.
/dev/sdb2 = remainder of the 500 GB USB hard disk encrypted using luks.
Screenshot: The /dev/sda1 figures don't really add up well, but they're close at least (how you get "50% Used" from any of those figures I don't know!).
However, for /dev/sdb2, they're miles off:
"Free" = 146.2 GiB
"Total" = 409.7 GiB
"Available" = 125.4 GiB
"Used" = 263.5 GiB
[Code]...
I am getting occasional errors during the boot process.One at the beginning and one or two when I switch to single user mode.I 'd like to run the system file checker to fix any possible errors.But when I run fsck in the terminal I get the message:Code:
mansour@ubuntu-notebook:~$ fsck
fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
[code]...
So 2 days ago everything was all fine on my machine. Has been for about a month, but all of a sudden as of yesterday I have no sound, I am seeing IRQ interupts on boot, During boot I am seeing file system is not clean, , and swap space is being used for the first time while doing normal task, etc. These are 2 new hard drives in RAID 1 with ReiserFS. I should have used a newer FS but thats a whole other argument.
Anyways here we go.
The system is Debian Lenny amd64
Physical RAM 4GB + 6GB swap
/var/log/messages
Code:
Feb 21 07:35:09 Sarah kernel: imklog 3.18.6, log source = /proc/kmsg started.
Feb 21 07:35:09 Sarah rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="3994" x-info="http://www.rsyslog.com"] restart
code....
I plugged in my USb drive into my computer yesterday and tried to delete a folder. I was unable to do so and got the following message
Cannot move file to trash, do you want to delete immediately? The file "my file" cannot be moved to the trash. Show Details Unable to create trashing info file: Read-only file system
So when I click on delete I get another error message:
Error while deleting.
There was an error deleting Case Study Database. Show Details Error removing file: Read-only file system
At this point I can only click on Skip, Skip All, or Cancel.
I have not changed anything on the stick recently so I dont know what is causing the problem.
reducing the size of LVM. I did it by using the commands, lvreduce,fsck,resize2fs.After reducing the lvm size, my system is not booting...it is saying file system corrupted error.
View 1 Replies View RelatedI have asked this over on Launchpad and have found bugs filed on the eclipse bug tracker but it seems to be going nowhere so I guess ill ask here.
I am using Eclipse for some development work and having saved a file, defocus the eclipse window (to test changes in a browser) when I refocus the eclipse window I get the following error...
The file 'path omyfile' has been changed on the file system.Do you want to replace the editor contents with these changes?
I have searched and searched and this seems to be a CIFS/SAMBA problem. I even found one solution suggesting that changing his mounts from cifs to smbfs fixed his problem however that would appear not to be an option for me since using smbfs in the fstab causes cifs mounts. This problem would seem to occur in Bluefish as well as some other IDE's so it is not an Eclipse issue.
---------- LINKS TO RELATED ----------
Launchpad Question
Eclipse Bug
--------------------------------------
I'm only just starting out with the Linux ubunto 10.04 OS after yeas of wasted time on Microsoft os's,I hope I'm posting this request for help in the right forum thread, if not please accept my apologies, I have tried searching everywhere for help in installing a firmware file into the File System / lib / firmware directory and each time I get an access denied result. The file is for a DVB board and I have managed to track down the right Linux fw file for this particular piece of equipment, Could some kind helpful person either explain how to get this firmware file into the Root System directory or even send a link to another site that deals with this sort of problemI've downloaded all the programs via the Ubuntu Software Center that should be able to perform this task however all to no avail.The reason why I posted this thread in this forum board is that it (in my own personal opinion which may be wrong) seems to me to be a security problem
View 1 Replies View Related
