I'm running 10.10 on a Dell Inspiron 1100 laptop. It worked perfect before but I had to do a reinstall of 10.10 and can't remember how to get Docky to work right. At present my screen looks like this: see attachedAs you can see I only have use of 75 % of my screen
View 3 RepliesAfter boot, first time I log on to Gnome I get compositing error (Docky shows one in top right corner) "Docky requires compositing to work properly. Please enable compositing, and restart Docky.". Furthermore some black wide stripe appears in the bottom of the screen, mouse pointer looks like a black cross and window decoration are missing. If I log off and re-log on everything works like a charm.
After first boot:
After re-log on: Ubuntu 10.10 on Acer Aspire One (A110L) with Compiz enabled and Docky installed.
Docky says it needs compositing to work properly how do I enable this?
View 6 Replies View RelatedI am a somewhat new user to Ubuntu, and I just upgraded to 10.04 from 9.10. I did not do a clean install, just an upgrade by running "update-manager -d". Once I upgraded, lots of problems started happening:
- I booted up, and nothing came up but text like in a command prompt; not a splash screen. Is that correct? - When I logged in, none of my windows had tops (i.e. Window Title, Buttons for minimize, maximize, and close). I changed the theme and turned on the max graphical effects, and that fixed it. (by the way, I know my graphics card can handle it because that is how it was set up on 9.10)
- ...Then, I took off the bottom panel and added Docky. Once I added my icons to it, I restarted, and then the window headers were once again gone, and Docky popped up a message in the top right saying it needed Composite support turned on (i.e. Metacity or Compiz). I turned it on in Metacity (I also have Compiz installed), but nothing changed. So now I have no tops to my windows and have to resort to ALT+F4 to close windows, etc, and I have a huge black rectangle taking up the lower 1/4 of my screen that is just black, with Docky in it...it isn't just a border around it like some other posts have said, but rather takes up almost half my screen.
When I logged in, none of my windows had tops (i.e. Window Title, Buttons for minimize, maximize, and close). Also docky give an error msg : Docky requries Composting to work probably. And I should click on compiz fusion icon and select compiz window manager every time I boot up. So how can I fix it please??
View 6 Replies View RelatedAfter setting a new sid system with Compiz, I noticed the volume display shows a brown/maroon border around the icon. I payed no real mind until I installed Docky which really shows the issue. A solid patch of that same color on either side of the dock. When using Metacity the problem is gone, so I'm thinking it's a Compiz issue or video driver issue. I have an Intel chipset. Screenshot of some of the artifacts. compositing_aritifacts.jpg (36.75 KiB) Viewed 195 times
View 1 Replies View RelatedI've just installed Kubuntu 10.04 (Specifically Linux Mint 9 KDE, but this is definately an upstream problem)
I installed the closed-source driver for my Ati Radeon 4x series using the Hardware Drivers tool. However, when I now reboot, compositing (desktop effects) are disabled.
Going into the Desktop section of System Settings, I recieve an error message "Compositing is temporarily disabled" Clicking "Resume Compositing" pops up a KWin notification saying I need to press Alt+Shift+F12 to resume compositing.
If I do this keyboard shortcut, the Desktop settings dialogue tells me compositing is active, but really it isn't (no desktop effects, software is drawing the windows etc)
Uninstalling the driver and reverting to the open-source one is not an option for me, unless anyone knows how to make Runescape work in OpenGL.
Under gentoo after the last update, the opera window doesn't update after a few seconds of showing itself. I have to move the cursor over an icon or anything that changes appearance to make it update. This is very frustrating when in the middle of typing a URL, the window stops updating and I'm typing "blind". While playing flash/HTML5 movies this is also quite frustrating
This is under gentoo,KDE 4.6.5, mesa 7.10.3, opera 10.50. I disable compositing because performance is dreadful (Intel graphics) on my external screen, which I use most of the time. For now I've worked around the issue by changing the compositing backend from OpenGL to XRender (where the performance is acceptable), but I'd like to disable compositing altogether.
My theory involves the XDamage extension, but I have no idea about how to work from there.
I certainly do not want to install Elementary OS, and just want a similar interface. I already installed docky, but Unity gets in the way. Is there a way I can disable that? Also, can I hide the docky application icon on Docky? Or is there a better way to do this?
View 6 Replies View RelatedI now find the icon for File Manager doesn't do anything! Well it bounces to indicate that it's working but the File Manager/Browser does not come up!Does anyone know of a solution to this
View 9 Replies View RelatedOnly the Computer bookmark works; if I click on the others, nothing happens. If I start Docky from terminal, this is the error message I get when I click on the bookmarks
Code:
[Error 14:08:03.018] [SystemService] Error opening files. The application doesn't support files/URIs or wasn't found
This worked earlier today when I set up the bookmarks plugin, but all of the sudden it's dead. Any ideas how to fix this?
I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies View RelatedI have installed php5under Apache and addedmysql also. My problem is I have acreated a file in var/www called testphp.php and try to run it from a command prompt. Keep being told it cant find it! It only has one line running info.php. Keeps saying there is a swp file of this name in var/www. How do I delete this and get my copy of php working properly?
View 1 Replies View RelatedEver since installing 10.04 my fonts won't work. I've installed MS True Type every possible way I can and they still won't work.
After installing they seem fine in all applications, except on the internet. Both FF and Chrome can't seem to read (MSTT) fonts, at all. Every website I open fonts are displayed the same as before I install MS True Type.
I just installed ubutnu 9.10 and just installed samba. I edited the config files to workgroup to dhome which is the work group all my windows comptuer uses to share files. I want to share files and also be able to access files off my windows computers. I got onne windows 2000 that has a username needed to be typed in to access it. the rest is accessable. In the config file. I uncommented the security= user thing. I now tried to access the network but still fails.
Here is what I can see. when I go to places and click network I see windows network and click it it will say dhome and Workgroup. when I click on the dhome folder it takes a while and then gives me the error saying sorry didnt' get a list from the server. what do I need to do to access the network?
Once I updated to 10.04 I had some problems with my themes, but updated it and it works fine now. BUT, in firefox, 3.6.3 it looks like this:
I can only see the personas image at the tabs and the statusbar. Does anyone know how to fix this?
I've been trying to get full video card support for the following card Radeon HD 2400 XT Im running the new 10.04 and I cant seem to get the 3d stuff to work properly with compiz When I go to Administration - Hardware drivers it recommends the ATI/AMD proprietary FGLRX graphics driver. Even after getting that installed I still cant get Normal compiz to work. I dont know if it is the driver or some other configuration.
View 2 Replies View RelatedI have set up an apache 2 server, but can't seem to get authentication to work properly. I have set up this in my apache2.conf:
Code:
<Directory /var/www>
AllowOverride AuthConfig
</Directory>
<Directory /var/www>
AuthType Basic
[Code]...
I have created the passwords file with htpasswd and defiantly have the right password for bob. However, when I try to log in the box just comes up over and over again and never authenticates. What am I doing wrong? I'm a newbie, so please bear with me if I've missed something really stupid.
After windows 7 failed to install and decided to take my partitions with it I managed to restore them from liveCD.I now can't get grub to work properly. I finally got it to find boot into one of the my two OS', but then borked grub it again when trying to update-grub2.Output from bootinfoscript attached.
View 9 Replies View RelatedToday when working with Windows 7 Disk Management, I carelessly mark the partition on which Win 7 is installed as ACTIVE and the chain of problems began. When I restarted my laptop, something like this appeared:
Code:
No such partition.
Grub rescue>_
[code]....
I am trying to install some packages in a ubuntu 8.10 server, however, apt-get doesn't work (I get several 'not found' errors). Is there any way to do that? I know this version is probably not supported anymore but I can't just format a customer server because it's OS is outdated...I just can't put my sources.list on it because I am on ubuntu 10.10 and it would download updates for the wrong OS probably causing a huge damage on the old one.
View 9 Replies View Relatedi meet a problem recently while i try to install a software via software center. After i start the software center, i input the name of software into the input filed. The panel keep the status of searching with nothing return. While i click the installed software, the right panel show nothing but the icon showing processing. My network works perfect, i can install software using the terminal. The ubuntu version i used is 10.14.
View 4 Replies View RelatedI just installed kubuntu 9.10 on my new PC (HP Pavillion). I'm new to ubuntu, I had some experience before with mandriva.Most things work properly but there is a strange problem with the mouse (USB), and more precisely with that little wheel which stands between the two buttons. Turning it when the pointer is on some web page (using firefox) I expect the page to scroll. So I turn the wheel in one direction and the page scroll up. Good!I tried with other programs (konqueror, kmail)... and still the same happens, I can only scroll to the top.
View 9 Replies View RelatedI am running ubuntu 9.10 on a dell mini 10v. I am experienced in running themes and xsplashes, but for some reason i can not successfully install pointers. I drag and drop the pointer themes to the appearance window found from System>Prefrences>Appearances. When i click customize i see that the pointers i instatlled are there, however when i choose them it doesn't work properly, if i go over text or resize a window i see the new pointers but the main pointer always stays the default white.
View 1 Replies View RelatedThis is about the 3rd or 4th year that I have tried to fill in my Federal tax return on the IRS website using Ubuntu/Firefox/pdf program(s). Still to this day the PDF functions found available (or should I say unavailable) (whether using either EVINCE or ACROREAD) for this O/S will not properly function in allowing you to CONSISTENTLY complete a PDF IRS form on their website, print and then save that completed IRS form to the hard drive of your computer. This is sort of ridiculous! Yes, I have report this as a bug NUMEROUS times and it is still not fixed.
View 9 Replies View RelatedI've been struggling to get my sound to work properly in my HP dv7 laptop in Ubuntu 9.10 64-bit.
If I follow the instructions here [URL] then I can get my microphone to work.
My speakers worked fine right out of the box, but the headphone jack does not. When I follow the instructions here [URL] and install the alsa backports then my headphone jack works properly, but when I shutdown my computer I get a loud crackling/popping sound. Uninstalling the alsa backports stops the crackling, but then the headphone jack doesn't function.
So I installed Lucid on my G4 Cube and now am trying to figure out how to make the video work properly.Right now it is in low graphics mode, which is not pleasing whatsoever.I have the 17" Studio Display (LCD, rev b) connected to it and it has the ATI Rage 128 Pro graphics card.I went into the xorg.conf file and there was nothing there. I tried the suggestions for the 15" display but that results in the x server crashing, so i undid that.
View 9 Replies View RelatedI am very very new to linux and this is my first experience in linux..I preferred to start with UBUNTU 10.10...I downloaded the last release of 10.10 netbook and desktop edition. I have a TABLET WIN7 PC, it does not have any Keyboard and it supports multi-touch, and works properly on Win7.
My Tablet name is THD PX1 with 1.66 Intell atom processor, 1 GB Ram, 256MB Intell 3d Accelerated VGA, 160 GB H.D.D and 3*USB2 and ... ( And at the back of my Netbook wrote that it supports LINUX and Win both) After I started the netbootin and provided live USB Netbook UBUNTU edition, I used it on my tablet and started it.
When I logged in, I faced with a STRANGE, REALLY STRANGE EVENT...THE TOUCH DOES NOT WORK CORRECTLY, You have to put 2 fingers on it to work as a touch screen tablet,else it does not work as a touchable tablet... And it is not multi touch... YOU HAVE TO PUT 2 Fingers ON IT....! I attached a Wireless USB + Mouse to it and try to install UBUNTU on it, maybe it works, ( I HOPE), but steel it is downloading the updates in installing process..
The web cam on my Dell Inspiron mini 10 doesn't work properly. Cheese only takes very dark pictures but no video and the main screen stays dark all the time. Skype transmits a very dark image, too. How can that be tweaked.
Bus 001 Device 002: ID 174f:1403 Syntek Integrated Webcam
Is there any way you can install ventral and get it to work properly?
Maybe through wine or some other program that let's you connect to vent