The thing is that whenever I try to install Ubuntu (Xubuntu actually, but the problem seems to happen with any desktop environment) I fill the spaces, choose the partition where to install, set the mount points and everything, but when I get to choose the keyboard layout the installation freezes, it just stays there and it won't give me the chance to submit a username and a password for my Linux session.
View 4 RepliesI'm trying to install Ubuntu 10.24 at a computer running Windows 7. Here are 2 scenearios, with the same result:
If I boot from the Ubuntu CD and try to install it, the wizard is freezed at the keyboard layout selection. I'm able to select my keyboard, but after I press Forward, the button is greyed out and nothing happens.
If I press cancel, I load the Live CD and retry the installation from there, selecting the shortcut "Install Ubuntu 10,04 LTS" from the desktop. Everything goes fine until the keyboard layout selection. Just in case, my keyboard is a USB Microsoft Natural Ergonomic Keyboard 4000 and it works perfectly fine in Windows 7 and in the Live CD.
Running Ubuntu Lucid Lynx, GNOME 2.3Keyboard Preferences utilityAdding any Spanish language keyboard layout makes my Alt_R not work in ANY layout! I see that it changes Alt_R to "Iso_L..." for all/both layouts, including USA layout. When I click "Reset to Defaults" it's fine again, USA layout shows Alt_R again. I've tried all the variants of the Latin American layout and the Spain layout and they all do the same thing.What is "ISO_L..." and what's going on?i DESPERATELY need my Alt_R to work!
View 2 Replies View RelatedI have installed opensuse 11.3 a couple of weeks ago in 2 computers and both suffer of the same problem.In my asus laptop, i have a german keyboard. It is correctly recogniced as german keyboard by ev-dev, i guess. (ev-dev managed). But i need to write some spanisch symbols too, like accents (á © í ³ ? ñ¬ ·hich in a normal linux, they do work. For some reason, after rebooting, or after some time of having it running, the keyboard layout resets to an invalid setup, here accents get not over the letter (?a ?e ?i ?o ?u), so i have to select my layout again in the gnome control center.
With my other computermore or less the same.Its a desktop PC with an spanisch keyboard. But i thinck i picked German keyboard during installation and now it starts always with german with some sort of 5 secs delay when setting it. I have to pick spanisch and i always delete the german layout, but after some time having it running, it resets to the previusly deleted german layout.
having problems with my keyboard layout since upgrade from F11 to F12. When I reboot and login into gnome I have to switch back to my layout as it has been set to USA default layout.
View 3 Replies View RelatedI have tried to install Ubuntu Lucid Lynx on my Aspire One netbook. I tried both the full version and the netbook remix and both installations stall at the keyboard layout stage. I select the layout and click forward but it stalls and doesn't go any further. Anyone else have this problem on any of their machines or do you think it could just be specific to the Aspire One? I just find it odd that it happened on both versions. They work fine in live mode so I don't know what could be causing this.
View 8 Replies View RelatedIf I switch using CTRL-ALT-F1 to the console, then I have other keyboard layout than under Gnome Desktop. Howto change console keyboard layout?
View 5 Replies View RelatedI downloaded one of the businesscard isos and booted up, but have run into the problem that my usb keyboard is dead in the installer. It works in setting up my bios, and has always worked before, but I cannot choose any items on the installation menu. I found a bug report that seems to be this issue, but it said that this would be fixed when debian moves to the 2.6.32 kernel on the installer.
View 1 Replies View RelatedI'm trying to install Debian Jessie beta2 on a UEFI laptop. The installation worked just fine before with setting in manual partitioning an EFI system partition and a root partition.But when I try to partition with root as an encrypted volume I get this error when I wanna write changes to disk:" the attempt to mount a file system with type vfat in scsi1 partition sda at /boot/efi failed"When I choose resume partitioning the installer then freezes at "detect file systems".
Because my harddrive needs specific alignment I've made beforehand in gdisk:EFI System Partition of 100mib at /dev/sda1/boot partition of 512mib at /dev/sda2/ (because I expect the installer to want a /boot too for an encrypted device)rest of harddrive reserved for root at /dev/sda3
I have acer aspire one netbook i'm using ubuntu 10.04 on my desktop but i wan't to install ubuntu on the netbook. i made usb installer ubuntu will run from the usb drive but when i try to install it gets stuck on step 3 of 7. wth? tried over and over again
View 2 Replies View RelatedI was using a custom layout for my keyboard as I've a UK laptop but still use french accents sometimes. After the update from Wheezy to Jessie my configs disappeared so I have put them back:
- Defining my layout here: /usr/share/X11/xkb/symbols/gb
- Adding here: /usr/share/X11/xkb/rules/base.xml and here /usr/share/X11/xkb/rules/evdev.xml in the gb configItem
Code: Select all    <variant>
     <configItem>
      <name>accentsFR</name>
      <description>English (UK with french accents)</description>
     </configItem>
    </variant>
- Adding the declaration of the layout here /usr/share/X11/xkb/rules/base.lst and here /usr/share/X11/xkb/rules/evdev.lst
Code: Select all accentsFR    gb: English (UK with french accents)
So everything looks alright, if I go to System Tools -> Preferences -> Settings -> Keyboard -> Input Source my layout is well selected and I can even see the correct layout by clicking on the keyboard icon (cf my snapshot)
Here is the snapshot of the keyboard input source settings: [URL]....
i've just built my own debian distro with simple-cdd, based on the latest release of lenny. everything is working fine, except for:
first, i couldn't set a default keyboard layout up in preseed file. i tried all these settings below, but none of them worked:
console-data console-data/keymap/qwerty/layout select US american
console-data console-data/keymap/family select qwerty
console-common console-data/keymap/family select qwerty
[Code].....
I used to have F9 on my HP pavilion dv8000. I have been trying to install F10 (and even CentOS 5.3) on it and, during the installation process, when I choose the keyboard layout (english) it doesn't go on. Weird because I am using the same disk I successfully used to install F10 on my desktop. What could it be? The same problem happens when I make the installation process in text mode...
View 1 Replies View RelatedI defined a variant to my keyboard layout (Italian) editing the file/usr/share/X11/xkb/symbols/it and adding this block:
Code:
partial alphanumeric_keys
xkb_symbols "itaro" {
[code]....
I have problems with keyboard layout switcher. On Gnome everything works. But when I start to use other DE I can't switch keyboard layout by default. So I create xorg.conf, but anyway it doesn't work...
View 1 Replies View RelatedI'm a used Ubuntu user on a pc, and I like the french keyboard layout because it allows me to type accentued characters easily.I found a win-fr keyboard layout but it's much like windows and not so good.I found xmodmap.fr keyboard layout and I'd like to know if it was possible use it with my Mac SL 10.6.5, maybe I could do xmodmap xmodmap.fr or a way to convert to mac layout file.
View 1 Replies View RelatedRecently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
View 2 Replies View RelatedI am trying to install fedora 10, 64 bit on computer with the following specification but the installation stops during installation (mouse , keyboard, screen freezes).
Motherboard Gigabyte GA-MA790GP-ud4h rev.1.0
processor AMD phenom ii 940
I have updated the bios to the latest version.
recently i tried to install for the first time and everything booted up fine but when i got to the post install configuration my mouse and keyboard don't work! after that one time whenever i try to load linux it just sits at the boot screen where the colored bar goes left to right and has fedora text in the bottom right corner. i don't know if this matters or not but i'm dual booting with windows XP also i tried using a live cd of fedora 11 it always boots up to the login however just like above i can't use my mouse or keyboard for that one either.
View 8 Replies View RelatedI installed Ubuntu 11.04.
how to set the keyboard layout.
I keep using the rescue cd because whenever I choose a keyboard layout the system does not seem to keep it like that.
After rebooting it loads another layout and I can't find which keys to type in that unknown layout. So for the moment, my password is 'tt' because I know it will work in both layout.
I have a belgium azerty keyboard. For the moment the upper option in the keyboard layout screen is USA and the lower option is Belgium. Which is weird since I thought that the upper option was of higher priority. But at least it works like that. At least until I reboot I think
PS: the rescue cd has also a keyboard layout problem. I chose belgium and I end up with a usa layout.
I recently got a new keyboard, and went with a Razer RZ03-0018. It's not working. I have Swedish as my default language, but it defaults to... enUS I believe. In System > Preferences > Keyboard > Layouts, I can't find the keyboard listed anywhere, and even though I have it set to "Swedish", I still get that weird enUS layout
View 3 Replies View RelatedI'd like to change around my keyboard layout a bit and can't figure out how. I'd really like to swap f1 and f7, f11 and f2, right alt and escape, backspace and caps lock, and a few of the letter keys. Is there any easy way to do this? (It's a confusing story about why I want to swap the f keys) Gnome, if it matters.
View 7 Replies View Relatedmy keyboard layout keep changing from windows to windows. When I am using my French keyboard, I set the keyboard to English and it doesn't make the change for all the open windows, despite having selected the "separate layout for each windows" unselected.Plus if I am in firefox with a French layout go to another windows and come back to the firefox windows, the layout is back to GBR.
View 4 Replies View RelatedI've got an odd problem with the keyboard layout options.
I use caps as an additional control, as set in Keyboard Preferences > Layout > Options. However, I recently came across an issue where Shift + Space does not send space, so I go into the options to set space at any level to fix it, and while the option appears to have been selected, there is no change in behavior.
Whats going on?
I recently decided to try out the Dvorak layout, and manually rearranged my keys today. For those who do not know:
Dvorak is a keyboard layout designed in the 1930's that is designed for comfort and speed. It is reported as being easier to learn than Qwerty, and more comfortable as well. Keep in mind that you can still type in Qwerty after you manually change your keyboard to Dvorak.
First, for those who want a Dvorak keyboard, you don't! You can rearrange the keys on your existing keyboard like I did. To do so, insert the dull end of a fingernail clipper (or other long, thing object) into the area between two keys on your keyboard. Be sure to unplug your keyboard first, or you might end up typing ksiwmvosioiwjefoakjsdfj;ls.xoqw, or worse, triggering a system shortcut.
Be sure to look at a picture of the current Dvorak layout first. Once you have removed the necessary keys, line up the male end of a key with the female end of the location it needs to be. Press down hard! You tap the key in its new location a few times before you proceed. Some of the keys on my keyboard were different. On my keyboard, the F and J keys and their slots were different than the rest of the keyboard. These keys sunk when pressed. To avoid this, I put these keys in upside down, as you can see in the first example.
Once you have placed all of the keys, plug your keyboard back in. Type something. You'll notice that everything is completely normal, except your keyboard looks like the something from Carmen Sandiego: Word Detective. In order to type in Dvorak, you will need to add the Dvorak keyboard layout. Doing so is simple. Go to System>Preferences>Keyboard. Go to the layout tab, and click "Add...".
If you are limited on screen space, or don't want to spend a century scrolling down to the bottom of the list, go to the "By language" tab, select English as the Language, and select USA Dvorak as the layout. If you want, you can disable "Separate layout for each window". Now, click on USA Dvorak and click "Options...". You will want to change Alt/Win behavior to "Meta is mapped to Win keys". Also disable anything under "Key(s) to change layout".
Now, click on "USA" in the notification area and notice that it says "USA2". You should now be able to type in Dvorak. Try typing something! Be amazed at how slow you are. Next, try out a keyboard shortcut. If you have Compiz, some of your shortcuts might not work. For those shortcuts that don't apply to Compiz, try rebinding them in Keyboard Shortcuts. To fix Compiz using Qwerty for shortcuts, press alt F2 and run this command:
Code:
compiz --replace --sm-disable --ignore-desktop-hints
Also, you should change the layout on your login screen next time you login. Don't want to type ekrpat, now do we? Unfortunately, after finishing righting this, I discovered Colemak...
I have an Ubuntu server running on a VM. I'm accessing this system mainly remotely, and usually with a console connection. I export the output of some applications (like Skype, Google Chrome etc.) to my Windows desktop, where I run Xming as my X server. Everything works pretty neat, but... I can't change the keyboard layout, because the applications are running on the remote machine. So is there a way to change the keyboard layout in CLI?
View 5 Replies View RelatedA few months ago I upgraded one of my Ubuntu boxes to 10.04.1 and haven't been able to switch keyboard layouts ever since. I have US and Russian Phonetic keyboards and used to be able to switch between them using the keyboard switching panel applet back when I was using Karmic Koala. Now the applet is gone and not even available in the list of applets.
I understand the applet has been removed in the new Ubuntu. But why? And what other means of switching keyboard layouts are available now?
The trouble is that I have never been able to switch layouts without the applet -- none of the keyboard shortcuts I tried under Preferences > Keyboard > Layouts ever worked in any version of Ubuntu. Now I can't even test the Russian layout inside the Layouts tab, i.e. when I select Russian Phonetic and type something in the test box below I keep getting US layout characters.
i have ubuntu installed on my vps and when i open terminal or office to write something i type for example a i then get f on the screen?
i go to keyboard preferences and add my country layout which is sweden ..but it doesnt change even after that.
How can I view the keyboard layout? Sometimes I need to write things in a different language, and I can't find the keys that go with certain symbols. How can I view the keyboard map? In Ubuntu this is easy, but I can't find anything in Kubuntu.
View 2 Replies View RelatedI made the mistake to install Ubuntu 11.04 without trying it first from a live usb. After 15 minutes switched to classic theme (Unity seems to netbook oriented and confusing to me). After 2 days I am about to go back to my beloved Ubuntu 10.10.
I added some keyboard layouts and also specified alt+shift as the command to switch between layouts. Unfortunately it is not working!