Ubuntu :: Changing Ext Hd Ownership From Root To User
Apr 17, 2010
I just got a 1.5 terrabyte Western Digital My Book 1110 external usb 2 drive. I used Gparted to reformat the drive to ext3. The problem I have is I can't change the file permissions for the drive because it says the drive is owned by root. I can't back up my files into the drive because it won't allow me to. I am using Jaunty Jackalope and got this drive to back up my files so I can feel comfortable in upgrading to Karmic Koala in case there are major problems with the upgrade.
I know someone out there in the community can tell me the commands to use in the terminal to let me gain ownership of this external drive from root so I can copy my files into it. the entire drive itself is seen as /dev/sdb One meg of the drive is unallocated and the part of the drive that I reformated is seen as /dev/sdb1 my personal files are owned by the name of dave
I have an external usb hard drive, vfat, mounted as /media/USB STORAGE. It has on it's own(?) changed it's ownership to root. I need to change it back. I have tried 'sudo chown -R pbhill : pbhill /media/USB STORAGE' and get the message that no such file or directory exists. I can access it read only, so I know it exists. Am I using the correct command?
i have inherited a mixed bag of sorts: several xp users updating an access mdb with the BE on a lamp stack shared via samba. i have a backup device which gets mounted at: /media/disk... each client record (has) a folder by the companyname on the samba share, and all relative documents are placed there. when the backup script runs, it just copies newer or missing files.
someone has been renaming folders, and not matching the folder name to the related companyname from the mdb. so...the backup script captures and duplicates the data in the renamed folders. some client records also have periods in the name (not required from a data pov), such as 'Company Ltd.' instead of 'Company Ltd'. i can produce a list of company names as the folders should be found easily enough, but get a little stuck with the linux scripting.
i can easily remove and further prevent any unwanted punctuation in the company name on the client record, and create the correct folder name on the samba share with vba, but would also like to:
-for each 'client activity' folder on the backup device -rename the folder by removing punctuation marks or -delete the folder if is a dupe
i tried: ls -al | grep '&' - it properly returns only those lines with an ampersand in the folder name, but returns all folders when i try that with a '.'.
what would be the easiest method to do the renaming? i thought if there was a way to change ownership of the mounted device, then the vba code (easy to write) would be simple.
OK - i just ran chown -R on the external device, changing ownership to (me) instead of root. didn't want to because it took too long, but can now use the MoveFolder method of the filesystemobject from my app to do the renaming instead of some sort of bash script (which i was dreading).
I have Slackware 12.2 installed on my computer, as well as a Windows Xp. I have a hard drive named '/fat-d', which is formatted to be 'fat' and is normally used under XP. This drive can also be accessed under Slackware, both as root and the normal user.I can not write to the directory '/fat-d' when I am not root, it is normal since 'ls -l' shows that its owner is root and other users have no permission to write. The problem is that, when I tried (as root) to change the owner to the normal user:# chown [normal_user_name] /fat-dI got an error: chown: changing ownership of '/fat-d/':Operation not permittedBut how can the root have no permission to change the owner?
Being new to Linux, i've just about got used to the Debian setup procedure now, but had a quick question on the default ownership of files and folders. On my default Debian installation, almost all the folders and files are owned by root:root. Is this the correct advised configuration or should the folders and files be owned by a user without root permissions - eg user:user?
I recently got a new external drive and backed all my files up on the new external: movies, music, docs, etc. Now all my files have permission rights to the root only. I was able to change this by open up nautilis from a terminal in root and change the permission on the whole drive to my current user so I can access the files, copy & delete the files. I wanted to change some music file information in Kynamo this morning and was not able to since all the individual files still belong to the root. How can I change this permission issue without having to change each individual file?
(Ubuntu 10.04) I would like to change to change the ownership of one of my storage partitions from root to dad - I am currently reading through as much Ubuntu documentation as I can but the process is slow. If I gksudo nautilus and select the drive, right click/properties/Permissions the owner is set to root. If I try to change the group ownership from root to dad it looks like it momentarily does it but it stays at root.
using Pysdm as a gui for fstab - but so far I have only found out how to allow other users to mount the volume not own it. My fstab entry for this volume reads as /dev/sdb6 /media/backuphd2 ntfs-3g group=dad,users,user,owner 0 0 - it looks to me that in terms of ownership, root = 0 0 Can I find out what the ownership of dad is in terms of numbers (e.g. owner 0 1 or owner 1 1) and then change the fstab entry?
I installed Ubuntu from the alternate cd a few days ago to save space and resources on a very old laptop. (install command line, then add what I wanted) But I have struck an interesting problem with file permissions. Various programs like synaptic, leafpad, pcman, Banshee, all require I enter the root password to execute them (or sudo command from terminal). I want to change synaptic from root ownership to sudo and leafpad etc to execute without using the sudo command in terminal. I could get comments on the commands before I execute them in terminal and if I am introducing a security problem, as I am still learning bash. $ sudo chown sudo:sudo synaptic
I would still be asked for my sudo password before being able to open synaptic? As in standard Ubuntu instead of root password.$ sudo chmod 777 leafpad pcman Banshee All users could open these programs from the menu? I have my admin account and a general account which I use for everyday things like surfing the net and listening to music.
I am running a shell script as the user "redhatuser01" and this script creates a files in the home directory of another user "redhatuser02" (/home/redhatuser02/sample.txt) but the ownership of this file is currently "redhatuser01". How can i change the "ownership of this file to the user "redhatuser02"? (My constraint is that I cannot sudo as redhatuser2 and create the file).
just trying to learn linux here and have some comfusing moments.it is my understanding that if you own directories and files you maychange the group, ownership, and permissions on all of these as you desire.however, in my case I cannot make any changes in my setup on group, ownershipor permissions on any of my files or directories.get error message <operation not permitted>. I know as root you ar supposed tobe able to do anything you desire, however in my case I can go in as root andtry the same commands with the same results. it is as if I am locked out ofsystem as far as any changes are concerned.on my jump drive I have:
I`ve been given a project to design a program that will interface with a hardware device through the parallel port.And so far it`s not going go. I managed to write the programe an compiled it, but when runing it the compiler says: 'changing ownership of'and then the file name then it continues to say, 'operation not permitted'.
I have been VERY lucky and managed to restore from a formatted ext3 /home/ partition. I used testdisk to reset the original partition which had had nothing done to it since formatting(!). However some of the file permissions are a altered and I cannot change them. I have tried "su chmod" and even temporarily enabled the root account itself and tried to alter the ownership/permissions from root 'proper' without it helping.
Here is an example of the output of ls -l drwxr-xr-x 2 martyn martyn 4096 (date) (time) sponsors ?-----S--T 63231 92820383 44090688 4286824785 (date) (time) order.xls
The first line looks like a normally formed output and indeed is readable. The second line looks corrupted and I don't have a clue how I can reclaim this - or even if it is possible. Should I count my blessings most of my files are intact and leave those be?
Why would I need to be root to change the ownership of a file? Example: I'm logged in as dwadmin and I've created a file:
-rw-rw---- 1 dwadmin dgw 0 Jun 17 07:46 testing.txt
I want to change the ownership to another user, but am getting the following error: chown 511 testing.txt chown: changing ownership of `testing.txt': Operation not permitted
how I managed this, but somehow during a reinstall I changed the ownership of all my home stuff to root, instead of my normal username. So now nothing loads, unless I sudo it. I had to use sudo just to open firefox.
Is It possible to change a process running in root-user to non-root-user by setting suid / uid / euid / gid etc... I so please instruct how, when and wat to set in order to change a process running in root-user to non-root user
created a user but i forgot to change the home directory permission.so after user created when i go to the user and group mangement i cant see that permission filed related to the home permission directory.my purpose is to stop accessing other user to my home directory,how it can be possible??
I no longer have access to my root desktop. On a session I attempted to change the root username but i apparently assigned it a wrong directory that does not exist. When I rebooted with my new root username, i was instead recognised as a simple user (no root privileges). I tried the console to change to "old" root but root password is not accepted and there is no way to access to sudoer files. it seems that inserting a new username requires root privileges and i am back to square one. Simply logging with old root username and password after restart gives me a blank screen with nothing on it and cannot even reboot.
i used opensuse 11.1 ...there is option for root user to create password for root...but for ubuntu i did not find anything like that...so how can i create root password....or how can i use root
A friend of mine has told me to set a root password and use root (f.e. switching to su in terminal and work with root rights instead).Is there any way to unset the root password? I know how to use sudo now.
i am having problems with privileges i have created a new user with my name, but i cant get root privileges on it. i need the same privileges as the root profile.
i just installed linux mandriva 2009. i set password for root and created a user account. when i try to login as root, after logging out as user, it does not allow me and gives the error "root logins are not allowed". even it does not show the root account. if i try to go to root from konsole terminal using su root, it allows to enter as a root but when i try to start the GUI with startx it gives error.not sure what to do and why i can't see my account in GUI mode
I found that if any usual user is logged into a NDS-tree, then _local_ root has full access to user's network shares, including the user's home directory located on remote Netware-server. Is it by design or have I missed something? Nevertheless in windows local admin has no access to network resources mounted of any other user. If you runas shell (as admin) then admin in principle can't "see" network shares which were mounted (connected) by other users - they are accessible ("visible") per session.
I am using mint 8 for a 2 weeks, I am noob to linux but I like Mint than any other linux distro which is great alternative to windows. I have a problem regarding password reseting.
1. My laptop automatically get logged in without asking user name and password.
2. I tried to change password for newly created user and root user using graphical way but it does not work.
2. I can perform administrator task using only OEM user which is default inbuilt user of mint.
How can make my laptop to ask password when mint get booted? How to change password for other users?
Earlier this morning I made my girlfriend an account on my Ubuntu desktop, I entered all the information, (username, full name etc.) and it worked fine. When I went to GDM I noticed that it displays both her full name, and username, but I seem to have my first name only as both my full name and user name (it just says "luke" twice).
I hadn't really paid attention to this before, but now it looked really odd with my girlfriend's full name, but only my first name. So I went to change it. Where to do that? I tried System->Preferences->About Me and System->Administration->Users and Groups, but I can't see "Full name" anywhere. In the end I used chfn on the command line to do it, but surely Ubuntu 10.04 isn't missing graphical a way to change a users full name is it?
In /etc/apache2/sites-available/default, I changed my 'Document Root' and 'Directory' from /var/www to /var/www/newdir.have an index.php file in /var/www/newdir I use to authenticate, but when I try to redirect back to index.html in /var/www, i get a 404 error.Anyone have info / know where the link to this discussion is
I've had apache installed for a couple of years with no problem but this morning I thought I would change the apache document root to my secondary disk so that my WAMP setup in my Windows partition and LAMP could share the same files. I've edited the etc/apache2/sites-available file to point it to the new location of my document root but I am getting a 403 - forbidden "You don't have permission to access / on this server." error when I try to load files through the browser. I'm not sure if this is a permissions issue or the way I've edited the sites-available config.
Here is the new sites available config: Code: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /media/Data/webroot <Directory /> Options FollowSymLinks AllowOverride None .....
