Apache is installed and working fine using localhost. Php already installed in ubuntu, however i cannot find the directory where apache is installed so as to save my web pages there. server cannot interpret php files.
View 1 RepliesHow do i find out how much free space that i have before i install fedora and ubuntu?
View 3 Replies View RelatedIs there any way to find out the space consumed by a particular application??
AFAIK,applications installation are distributed across various directories in Linux(man pages,executable files,etc..)and the very close i can get is to run 'whereis' command which gives me all the paths where the application's files are stored.
Do i have to manually go to each and every such paths and check their sizes??
I'm trying to copy all my photos from a windows drive to my Linux partition. So i created this small one-liner:
[code]...
the output from find has no space esc-character, i.e. /path/sub folder should be /path/sub folder.
My ubuntu server is a 1.5T with 448GB available. When I backup my files each night, my files only amount to 397GB. Is there an easy way to see where the extra 600 GB on my server is located? I think that I might have had a couple of old backups write to the server, but I cannot find them.
View 2 Replies View Relatedim running RHEL 4.0 with 2 x 146 GB for the operating system and a storage with just 2 x 300GB for the application. The application is almost 88% usage and this is the output of the fdis and df.
###################################
[root@ebs3 ~]# fdisk -lu
Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes
255 heads, 63 sectors/track, 17844 cylinders, total 286677120 sectors
Units = sectors of 1 * 512 = 512 bytes
[code]....
where is the 50 GB so i can use it to extend the partition c1d0p1 and c1d0p2 that are running out of space. Did they being used to build the mirror? is not much 50 gb?
How can I figure out which programs are using up swap space? My current memory usage is 2.9GiB out of 3.0GiB used(and I though I had 4GB, I need to check into that) and 1.3Gib of swap used.
View 1 Replies View RelatedI have a linux server top reports about 9GB of swap used:But I cannot figure where's it use swap, some google results said that top - O commad follow by p will show swap usage by process. But as shown in the above image, taking a brief sum of the SWAP column shows that > 10GB of swap is used, so where does the 9GB figure for swap usage come from? Top reports that about 96492kb of ram is used by buffers. Is there anything I can do to utilize this, instead of using swap?
View 1 Replies View RelatedI am trying to edit a large bunch of files. Each file has four columns and I want to get rid of the first one, but in each line the number of the first column changes. the number in the first column ranges from 1 digit to 5. For example
1 aaaaa bbbbbb ccccc
23 aaaaa bbbbbb ccccc
15343 aaaaa bbbbbb ccccc
and the desired format would be
aaaaa bbbbbb ccccc
aaaaa bbbbbb ccccc
aaaaa bbbbbb ccccc
Were abouts is Desk 2, as in, right click program, move to another work space, Desk 2, so how can i find this desk 2?
View 2 Replies View RelatedLogical Memory Space of 4GB is divided in to 3GB User Space and 1GB Kernel Space. Always. Correct?
1. How can we change it? (just changing value of PAGE_OFFSET is okay?)
2. If system have only 256MB of memory (embedded system) and suppose Kernel Modules eat away all the memory during boot. User space will be left will no memory. Is this case possible?
I shrinked the /home partition using resize2fs command by 1GB and what had happened to remaining my free space .
View 1 Replies View RelatedI learned a little bit about this command (du) to find out how much space a directory takes up but what I want to know is can you tell it to exclude directories?For instance, I wanted to know how large the / directory is on my old suse10 drive but I want to exclude /home (/home was not a separate partition on that drive).
View 4 Replies View RelatedI had this come up in logwatch: /dev/sda5 4.8G 3.6G 960M 80%/
Any ideas how I can find which files are suddenly taking up the space?
We have recently built some RAC (OS:RHEL55) servers and after the Oracle guys have installed their application, somehow the directory / is using the maximum space. I contacted the Oracle team & they say that their RAC installation doesn't create any files in the / directory. This is the o/p of '/' directory file system:
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/datavg-vol2 498M 382M 62M 88% /
Also, when I checked the file sizes, I found that the following files were taking more space:
/etc/selinux/targeted/modules/active/
-rw------ 1 root root 17M Nov1 base.linked
[code].....
I don't know what these files are doing there, when I did a cat and cheked, I found the files containing this data:
nf_tre--
stem_dbusd_var_run_t...and some stuff like this Unable to decide whether or not to remove these files. Also, is there any way to find out what files are taking more space and whether they can be deleted or not? in order to free up some space in the / direcoty. As there are 10 RACs that we've build, I got to do something to fix this for all of the 10 servers.
While installing slackware64-current, setup cannot find swap space. This is an extreme case pushing limits with a huge GPT partition table. So there is probably some limit on the number of partitions, or partition number, the swap search looks for. Of 41 partitions I made scattered around the number range from 1 to 128, the swap space exists as partition 90. Maybe the problem is it can only check partitions 1-15 because 16 and beyond have to use a different device major number? When I do proceed with the install, /dev/sda90 is listed as a choice. FYI, so many partitions is planning ahead for a multi-boot system. The rest of the install went OK.
View 14 Replies View RelatedI want to find all users shown in the /home/ directory whose disk consumption is more than 500MB. The following command works as expected.
cd /home/ && du */ -hs
68K ajay/
902M john/
250M websites/
From the above example, only 902M john/ should be returned.
How can I make the find command output the same results?
There is a very conspicuous inaccuracy in the output of df. I should mention, that it was noticed to to a sudden change in the amount of space that was left on the backup partition. The df -h command produces the following output.
[Code]...
I have linux and windowsxp on one machine. I have only 3gigs free on the windowxp machine and 20gigs free on the linux machine. I want to transfer space from the linux box to the windows machine.Is this possible and what steps would I need to follow to do this?
View 1 Replies View Relatedi used gddrescure to clone an 80gb harddrive and this is the result ROFL.i guess you can only do this making sure the target drive is the same size, you see i didnt know lol so..i now have THIS problem.can anyone tell me how to turn my unallocated space into a usable 'free' space? i could play with gparted right now but i dont wanna do anything wrong, so if theres anyone who can tell me how to do this.
View 1 Replies View Relatedi made space by shrinking my window partition and so i have unallocated and would like to add to sda2 to have more space. Check out this pic. How can i do this?
View 1 Replies View RelatedI installed Ubuntu 10.10 with wubi and i have been enjoying my Ubuntu experience a lot. I installed quite a bit of programs and spent a couple hours customizing my machine. The problem is im running out of disc space. Any ideas on how i can add more space. I have gparted but i dont know where to move the free space to because wubi installed it.
View 1 Replies View Relatedso im following these directions
mplayer -ao null -loop 0 -ss 0:0:33 -endpos 2 medianame.avi
mplayer -ao null -ss 0:6:26 -endpos 3 medianame.avi -vo jpeg:outdir=animated_gifcd
when i put in a movie that say has one name like "christmas.avi" it works fine, but if i put in a name like "dead space aftermath.avi" i get error messages saying that it can find "dead", cant find "space" and cant find "aftermath". how to fix this? I made sure to type everything correctly.
my home partition is an extended one, and when i want to create an unallocated space the space will stay in that extended partition. but there is also an 7 gb unallocated space which i want to merge with the other unallocated space. I also cannot extend that partition over that 7 gb. how can i overcome that problem?
i m also uploading a screenshot of gparted.[URL]..
I am developing a I2C CDROM client driver. The CDROM firmware supports TOC information read through a I2C command. It sends the TOC information in burst ( Interrupts a GPIO pin when it is ready ) and my CPU does a I2C read to read the TOC. When the CDROM firmware finishes sending the last data burst , it informs my CPU that it is done with the TOC, by a flag in the last data burst. I would like to know, which is the most efficinet way I can send these TOC information to userspace?
View 4 Replies View RelatedI am writing device driver in which i have to call callback function from kernel space, which are saving my data. But the callback functions are in userspace. While accessing them i am getting segmentation fault.
View 1 Replies View RelatedI wanna write a file in kernel space but from my searching I can to know that instead of writeing file in kernel space ,I can write data to user space by copy_to_user space.
But link is missing ...I dont know how will my user space will access kernel space means my function in kernel space which will do copy_to_user /....How my user space function will call my kernel level function ..
Can any one of you provide me with some example file which are doing this .I know every char driver is using it ...but i could not trace back how user level function is accessing it ...i m confused between user space and kernel space.
Today I was installing a lot of software since I'm just setting up my Slackware system again after a fresh install, and I realized that my root partition has very little space left.
Here is the output of df -h:
Code:
As you can see, I have a 20G (19G here for some reason) root partition, 8G /var, and 86G of /home. I thought this would be plenty since many recent recommendations for / are 10-15G. Now, though, 17G are used up for some reason! How is this possible? I thought a full slackware install only had about 4G of software! I don't have any music or movies or any crazy huge files that I know of, and those would be in my /home directory anyway. Is there any way I can see which files are taking up all this space?
If it's necessary to allocate more space to my / partition, is it still possible to boot up a GParted live Cd, shrink /home a bit, move some partitions to the right, and expand my root partition? I would REALLY prefer I don't have to reinstall since I just spent a ton of time setting up my system again, but if worst comes to worst ... :'-(
In case you're curious, here's my /etc/fstab:
Code:
How to use execv from kernel space to call a user space program writtenfor socket prog.
I tried to write code for socket in kernel but its not working.
Socket code in kernel is also needed.
I was trying to install Fedora 13, on to my laptop. I have 30 GB of unallocated space in extended partition. When trying to install Fedora 13, I got stuck, as the installer says that there is no free space for installation.can convert the unallocated space into free space.
View 1 Replies View Related