i'm using ubuntu backtrack4 r2 , and it seems that there is no wlan0 i cant connect or even find any wireless network i tried many ways still nothing , i lateley managed to connect to internet through cable so it seems that the ethernet chipset is known by the system but i dont know why the wireless is not determined byt it , as if it doesn't recognize it it says when i pu 'iwconfig ' no such device.
View 9 RepliesWhen i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies View RelatedThe problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View Relatedat start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
On Opensuse 11.2, I would like to connect my ipod touch to a wireless ad-hoc network of my laptop. I have no wireless WIFI-router at home, so I have to use the laptop as a router to the internet. I know I have to enter a static IP adres and my router's address, but where ? I haven't found any place under network tools to do this, only saw some fields with SSID's and MAC addresses to fill in.
View 5 Replies View RelatedI've got openSUSE 11.3 running via liveUSB on a netbook and no matter how many times I try, I cannot get wireless to connect to my network.
My network is:
- non-broadcast
- WPA2 Personal
- G
The netbook is fairly recent from Asus and wireless works perfectly with Fedora 11 and Windows XP.
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies View RelatedI am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
I'm moving from other distros. and I'm currently loving openSUSE and I'm probably going to stick with it for a long time.I have already googled for this, but I found no solution, but I figured this should be a common problem... Does google searches inside this forum?Now... for my problem, whenever I hibernate (suspend to disk) or sleep (suspend to ram) I can't resume my wireless connection nor connect to another.I don't know if this is an issue if I use cables, because I simply don't with my netbook:The hardware in question is an ASUS 1005HA eee pc, running openSUSE version is 11.3 fully updated. Didn't mess with wireless connections, nor kernel or hibernate settings
View 9 Replies View RelatedAfter installing 11.4, I need to type in the command to update the firmware for a broadcom wifi adapter. Then I needed to reboot, twice, before the system knew to use the adapter (where the adapter wifi light goes from orange to blue).
Then I needed to add my wireless network and type in my key. But the key does not take. If I click on my wireless network icon, it just re-asks for the key and does not connect nor give any other message. Network icon continues to display no connection.
So I need to reboot again.
When the system starts again, the adapter is blue, I click on the icon for my wifi network and it connects without asking for my key and I can then set to start my wifi by default.
Now my wifi works fine.
All settings are correct as far as i can tell. The wep key works on all my windows boxes. When i have connect automatically enabled it never tries to connect. if I go to edit it it pops kde wallet up i put in credentials. wallet goes away then nothing happens. if i double click connection to my router also nothing happens. I have the wep key in there and i even made it visible to make sure.
View 5 Replies View RelatedI am using OpenSuse 11.3 and Network Manager is giving me a headache by not connecting to WEP based wi-fi network.It works in a wi-fi at my office while at my home, it shows / detects the network but keeps asking me over and over.
View 3 Replies View RelatedOne of the biggest issues i have at the moment is that my network based plasmoids on my KDE desktop load before my wireless network connection is established, so i'm thinking it would be best to start up the wireless connection at boot time. On previous distro's, I did this with netcfg but I can't seem to figure out how to do so in OpenSUSE 11.2. Is this the best way to manage this issue or is it possible to set a delay before the plasmoids load up?
View 5 Replies View RelatedI just installed opensuse 11.4 and i'm not being able to connect to my wireless lan. It recognizes my network, but when I click "ok" after typing the password it is like I had done nothing, no connection is set at all.I guess it is probably some configuration stuff since my notebook recognizes all available wireless networks. Sorry about the lack of details, but that is all I got.
View 6 Replies View Relatedi've installed openSuse 11.2 on my laptop (dell studio 15).Today at work i tried to connect to the wireless network, but i couldn't. First, the network card wasn't being recognized, but after a long time trying i was able to set it up, for this i used this command:
Code:
zypper in broadcom-wl broadcom-wl-kmp-desktop
So now, the networkmanager detects all the networks around, but i cannot (or i don't know
[code]...
I know that some wireless networks can't be picked up, and I checked the help section on that topic.. It told me to go to the command prompt in windows and do the ipconfig thing.. I did all that and the thing is I have Vista and I cant give special permissions to ANY users because of safety things.. Anyone know how to get my wireless network to show up on Ubuntu without changing the ipconfig stuff?
View 1 Replies View Relatedhave an hp laptop and im running hardy heron and dont know how to connect to my 2wire
View 9 Replies View RelatedSo i am running Ubuntu off my USB on my dell PC, please note that i did not install ubuntu, i am just running it for now.when on ubuntu, when i click on the network symbol with the red exclamation point on the top toolbar, it reads "Wireless Network: Device not ready (Firmware Missing)"So i just want to know how to connect to my wireless network.
View 3 Replies View RelatedTried the live boot of Ubuntu 10.04 LTS on my work PC today (it has Windows Vista on it and it is literally DEAD slow). There's a wireless network in the office and the PC has a wireless network card installed.
The problem was the following - I booted up Ubuntu, the "tray" was showing the network icon. I click on it, it shows me the list of all available wireless networks. I click on the one that belongs to our office, enter the password, click "Connect".
Now, here comes the problem - after "loading" for some three minutes, the same window pops back up. No errors, no messages, absolutely nothing. The password is correct because the Windows installation and the other PCs in the office can connect just fine. Anyone knows what could be the problem? The drivers are apparently fine if it can find the networks and detect the connection encryption correctly.
On my laptop HP presario, I installed Ubuntu 9.10 (Wubi). My Windows Vista connection works fine, but the Ubuntu cannot find my wireless network. My network card is the Belkin Wireless N (F5D8233-4v3). Do I have to use the ndis. On my desktop here, (wired) Ubuntu found my card without me having to do anything. What should I do. (unistall ubuntu and make do with Vista?)
View 3 Replies View RelatedI have installed the driver for my usb network adapterIt sees my adapter fineI see my two routers .....i have both a dsl routher and a router conntected to my cable modem ...it says signal strength of 90I see my neighbors network as well but when i try to connect to either of my routhersit will not let mei use WEB ... 128 bit..it asks for the passpharseit says it is activating....and the after a few minutes the same window back up againi know my pass phrase is correctwhen i reboot in windows ...everything works fine ...no problembut in 10.04 i can not connect to any networkwhat am i doing wrongI re entered my pass phrase a 100 times
View 4 Replies View RelatedI upgraded from Ubuntu 9.10 to 10.04 this morning, and I can't connect to my wireless network. The Network Manager shows it's there, with the correct SSID and security key and everything, yet it still won't connect. I'm using a D-Link DI-524 Wireless Router that I've never had any problem with before.
View 9 Replies View RelatedI am experiencing a bunch of problems on my Ubuntu 10.10. I will start off saying that I am a new user to the Ubuntu and Linux. I've been a user for 5 days. Anyways, I started off with Ubuntu 10.4. When using that, I could instantly connect to my wireless router and my school's wireless network. But after I upgraded to 10.10, I could no longer connect to a wireless network. Second problem is my webcam. The video works, but it won't recognise my microphone.
View 1 Replies View RelatedI'm having a little issue here with my laptop. I've installed Ubuntu 10.10 Maverick/Meerckat on my Lenovo Thinkpad T61p about 3 hours ago and it can't seem to connect to the wireless network... I've had the same problem when I moved from Windows to Ubuntu on my desktop but I've been able to fix it completely. The thing is I can't remember how I fixed it :S So, I updated my system, downloaded the additional drivers. Also, I cna connect to the ethernet network. To fix my desktop, I used some command lines that someone posted in a thread about the wireless keeping disconnecting... I just can't find that post though :S What I remember about the post was that there was someone who had posted a thing with like a parabolic thing around he wireless adapter (LOL)
View 2 Replies View RelatedI have dell inspron n4030 but i can't connect to wireless network to download other drivers and programs, that's easy in win7
i need the network card driver for ubuntu 10.10 where i found it?
When i click the networks icon on the toolbar, these options popup:
Wired Network - (disconnected)
Wireless Networks (device not ready--firmware missing)
VPN Connections
I can click VPN connections and that's it. How do i get the firmware needed to connect to a wireless network?
It's tooken me this long to get Ubuntu and now I can't connect T_T
Earlier in the week, I installed 10.10, but had awful problems trying to get the wireless networking working. Upgraded to 11.04, and wireless is sort of working. However, I am unable to connect to my wireless network. It sees the network, but just keeps asking me for the password. I enter this (I have checked that it is correct), but it just prompts again, after a little while. Networking through network cable works fine.
Wireless network is set up to use WPA-PSK + WPA2-PSK. I have checked, and I do have wpa_supplicant loaded.
Code:
Machine: Compaq Presario R3000 (R3363EA)
lspci | grep -i net
00:14.4 PCI bridge: ATI Technologies Inc IXP200 3COM 3C920B Ethernet Controller
02:02.0 Network controller: Broadcom Corporation BCM4303 802.11b Wireless LAN Controller (rev 02)
[Code].....
I upgraded to Ubuntu 11.04 from 10.10 a couple of days ago and now I cannot connect to my wireless network. I can see all the networks and I managed to connect to something called BTopenzone, just to see if I could connect to anything, and that worked. I also run windows 7 on the same computer and setup and it connects fine to my wireless network. Before I installed the Ubuntu upgrade I could connect without any problems. I've had a look at the settings for the connection in Ubuntu but I don't understand them.
My router is a dlink dir-655 My receiver is a edimax ew-7711uan wireless usb adapter
I'm having a new problem with my wireless. It's detecting the network, but it won't connect. My Verizon card says it's WEP, but the WICD has three WEP options and none of them connect. What troubleshooting can I do?
View 2 Replies View RelatedWe need to fina a wireles adapter that works with Ubuntu.We have a netgear adapter but the OS doesn't recognize it when we plug it into the USB port and there isn't software to install so it will recognize it - only Windows documentation.My daughter loves this OS and wants to keep it but can't connect to our wireless network without an adapter.
View 7 Replies View Related