I have a list of numbers I want to add a prefix number to the front of all of them,Is this possible with terminal, example "222222" put "1111" in front make the number "111122222" I have the list of 2222etc but not a list of 1111.
View 5 RepliesIf I do:
for i in $(cat names); do seq -f "$i%03.0f" 0 999; done > output5.txt
I got ( tail snipped):
997munt
998munt
999munt
If I do:
for i in $(cat names); do seq -f "%03.0f$i" 0 999; done > output4.txt
I got:
997Zygmunt
998Zygmunt
999Zygmunt
How I can get numbers from 000 to 999 appended like:
Zygmunt997
Zygmunt998
Zygmunt999
I have two sets of data. 1,2,3,4 and 6,7,8 and I have written a fortran code to put them in order as below:
program gap
implicit none
integer:: i, j
do i = 1,4
do j = 6, 8
[Code]...
I want a space once every row loop has finish.I am dont know how to write the data as shown above using the fortran code in this post.
am writing a small search program for my class. I have decided to use indexing for my program. Ive researched online about indexing and how search engines do it. If im gonno do that I need to create inverted files to associate files to numbers ( numbers being the index of my paths ) . Now I was wondering what would be the best way to create an inverted file ? I was going to create sql tables using mysql api in C but then again there is no array data type or vectors to store few numbers in a single column in mysql and it is not advised to use Enum or SET
View 14 Replies View RelatedI've got a /64 range on my vps and would like to add them all so i can use them currently i'm adding them like: ifconfig eth0 inet6 add ipv6ip/64.Is there a way to add all of them in the prefix at once??
View 1 Replies View RelatedUbuntu was working perfect for 3 months or more , but now all of a sudden after I restarted because I had massive lag, I found that I can no longer open Ubuntu.The error I get is "NTFS5 Prefix not set".Now I get black terminal when I open ubuntu.
View 3 Replies View RelatedI want to add suffix or prefix in all files (.txt , .avi . , .exe)from a folder
View 9 Replies View Related've googled first - but why is this in front of my username? (and dir) I have never seen it before but am new to terminal and want to learn.I am trying to rm the .Trash (some locked crap) sudo rm -rf /* isn't working and this weird 'prefix' is in front of every directory. Have I hosed it
View 7 Replies View RelatedI'm tryieng to install some software which requares php. I typed: Code: ./configure --with-php=/usr/include/php But in the end of configuration I get this warning: Code: configure: WARNING: unrecognized options: --with-php on Ubuntu systems it is okEverything installs ok. But on fedora I can not configure my software with php
View 3 Replies View RelatedI'm writing a application which uses translates and I wonder how to check what has been prefix of it's installation to check where translation files are stored. I'm using cmake so maybe is there some preprocessor definition of installation prefix
View 4 Replies View Relatedin LQ, what the 'g' in names like gzip, gawk means, becauseassumed the incorrect meaning.Cf. zip, awk. I have now forgotten. An easy answer would be: GNU. Perhaps it's the correct one
View 8 Replies View RelatedI ran into this bug: [URL]...I checked that overwrite-local was set to 1. So I want to delete all python packages that were installed by checkinstall with the /usr prefix.
Now it has been some time since I did this and I dont really remember. Does anyone using checkinstall know how to spot packages installed via checkinstall? I already checked the FAQ and doc of checkinstall, but no info on this.
I ran 'sudo apt-get install python', which completed successfully. According to [URL] this should have created the directory /usr/lib/python2.6, but I do not see any such directory.This is causing problems:
$ python
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
[code]....
I've tried 'apt-get purge python' and then reinstalling but this has not resolved the issue.
I have a text file containing file names with their paths prefixed as in:
/path1/file1.dat
/path2/file2.dat
and so on.
code]...
I have a very large directory with probably millions of small files in it. It's taking forever to run ls on the directory.
Is there an easy script that I can run to split the directory into smaller ones, based on the prefixes of the filenames. My goal is to wind up with something similar to what the Debian archives' pool directory looks like.
I want to rename files in multiple subfolders with a prefix (e.g., rename "file.tif" with "prefix_file.tif") and not have to be in the subfolder.
code: for f in /path/to/*; do echo mv "$f" "PRE_$f"; done
gives you this: mv /path/to/file1 PRE_/path/to/file1
instead I want this: mv /path/to/file1 /path/to/PRE_file1
I have rebuilded some packages from source to enable some features not in place by default. I usually use /usr/local as prefix for rebuilded packages.Now I have a problem building some other applications. Make exits with error saying that there is no .la file for some libraries from rebuilded packages - and it tries to find this file with /usr prefix, not /usr/local.Of course, I can place link to .la file I need under /usr prefix, but this is not good. Is there any way to make system search for .la files under right prefix (which is right in .pc files for packages too, of course)?
View 3 Replies View RelatedI have used avidemux to cut a mp4 file, choosing just a part of it, and I have discovered it automatically adds "avidemux" to the beginning of the name of the file, plus the author of the file and that I cannot edit the file to erase it. Note that I talk about "right click - properties", and that the file, as seen from home folder dont include the "avidemux" prefix, but if, for instance, I run the file with VLC, "avidemux" will appear, and that is annoying. how to delete that annoying avidemux prefix?
View 1 Replies View RelatedI have around 150+ folders in one directory. All contains some pdf files. Now i want to give some prefix no. to folder only not the files inside. How can i give the prefix to all my folders?Eg : Suppose i want no. 8562 then i want it like as follows
OLD FOLDER NEW FOLDER
ABC/ 8562-ABC/
AABC/ 8562-AABC/
have a gzip file ABC_000023232.gzipBCD_023232032.gzipI want to split these files into smaller files but keep the extension same because I am using this as a variable in a script
Code:
for i in `ls *.gzip`
split -b 500K $i $i
[code]...
Ive seen some fixes for this but they all seem to be specific to the particular user's sources.list . . . ..
Code:
Here is Line 54
Code:
I tried to change the basic toolbar to cairo dock,a tutorial that i found told me to write in terminal gksu gedit /etc/apt/sources.list.d/winehq.listso i write it and a window opened,i couled not find the text that told me(the tutorial i mean)so i closed the window,after that i keep taiking the same error
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
E: The list of sources could not be read.
Go to the repository dialogue to correct the problem.
E: _cache->open() failed, please report.
now whene i got in the winehq.list the text has gone and i take this error in update manager,my software center doesn't work and my terminal whenever i type sudo commands says
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
I get this error message: E: Malformed line 57 in source list /etc/apt/sources.list (dist parse)
I am pretty new to Ubuntu and dont really understand computer
Here is the sources list (??) as well
don't know much, but when I tried to update I get this error:
E: Type 'sudo' is not known on line 52 in source list /etc/apt/sources.list E: The list of sources could not be read.
All I want is for my bootloader to show "Ubuntu" & "Windows XP" which are the only 2 OS's I have installed (dual booting). At the moment it shows Windows XP, Ubuntu, Ubuntu recovery mode & like 2 more.. which are also Ubuntu & recovery mode. I've never selected the other Ubuntu ones, only the first one. So, how can I remove the ones I don't want to show on the list.
View 2 Replies View RelatedI am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
View 5 Replies View RelatedI am bit lost with configuring my apache2 web server. From the book I am using it says for me to configure apache2 to support PHP I need to execute "./configure --prefix=/usr/local/apache2 --enable-so". From what I can determine Apache2 is located in "/etc/init.d/apache2" folder. I used a Ubuntu 9.04 distro (I386 Server Ed.) to install the server. I added "Kubuntu-desktop" for viewing. Then performed web upgrade to Karmic 9.10. All went well !! Question is; Where do I execute a command to enable PHP support? Once again, the command is to look something like "./configure --prefix=/usr/local/apache2 --enable-so"
View 2 Replies View RelatedMy script.
Code:
I cannot get it to give me the "Unknown?" output. How do I fix my script so that it will give me "Unknown?" when I type in an incorrect prefix?
There is a problem with my source list (apparently) I'm running 11.04 if that helps.When I try to use apt-get install update for example, I get: "Malformed line 59 in source list etc/apt/sources.list"The same error occurs when trying to access synaptic package manager, it tells me there is a malformed line and the list of sources cannot be read.This error prevents me from apt-getting anything, updating and i suspect it is affecting the software center too.
View 6 Replies View RelatedI'm currently setting up a dell server with hardware raid 1 on sas 6r. i got 4 sas installed on the server and configured to raid 1 as stated below,
array 1:
slot 0 & 1
array 2:
slot 2 & 3
during the installation, the installer detect the array 2 as sda and array 1 as sdb.. so i proceed with installation on array 2. after completed the installation, the first reboot lead me to a 'grub-rescue" prompt. by following the guide at url Mode, i've noticed that the boot folder has changed to (hd1,1), which i believe it has changed to sdb1. default root device shows that prefix=(hd0,1)/grub.