I just installed 11.04 on my PC. I use my TV as my monitor because I use this machine to stream from Hulu, Netflicks or Icefilms. Ubuntu does not detect the resolution I want to use, which is 1152x648. An odd ball res I know, but everything fits best on that setting and I'm not concerned with HD.
This is what I've tried so far:
I then tried:
Then:
I checked my work by entering xrandr and the mode I added was in the s video settings but not available for the DVI-0 monitor.
How would I go about adding this resolution to the DVI-0 output?
Below I pasted what prints out when I input xrandr...not sure if diagnose my error.
I currently have my desktop setup with two displays, one of them being my living room tv that I run Boxee on. My problem is that all the audio runs through the same speakers preventing me from listening to music or gaming at the same time as when Boxee is in use.
I would like to know if it's possible to split the audio so that an application of my choosing only outputs sound through my headphones. I was thinking it would be possible with some of the controls in pulse, but if it is I cannot figure it out.
I setup 11.3 on PC and Belinea monitor (troubleshoting monitor). Everything was fine but since I installed nvidia driver (via 1-click wizard) resolution and font-size has broken
So I plugg another one monitor - Samsung SyncMaster and reboot system. After boot-up resolution and either font size were OK. I was able to select correct resolutoion and font size wasn't so tiny like on Belina.
It's looks like OS 11.3 have problem with correct output on belinea monitor. Driver is installed correctly. I tried to genereate new xorg.conf .
Is there a way to change my resolution to something specific? I was trying to make my display "less-widescreen" when I accidently made it completely changed.
From the sax2 command, there is only 1400*1050 and 1600*1200, both that are not what I'm looking for and messes up my display. Now, I can't change it back to the original, much less the one I'm looking for (1600*900).
Consider a situation in which you want to display only specific lines of contents from a file or of a command's output. Yes, we have head and tail commands. But, how to view all the lines of a file except the last one or vise versa when we don't know the count of lines in advance?
Here, I don't want the last line (in italic) to be included in the result since the last line is due to "grep bash" in the devised command "ps au | grep bash". Well, we can rewrite the devised command:
Quote:
"ps au | grep bash | head -n 2"
But, again, here we are specifying the count of lines to be included. But, in the presented problem we don't know any count in advance!
I have nine barcode scanners, each of whose input I want to send to a separate instantiation of a program I wrote. Each device shows up as /dev/hidraw_ (I'm using Ubuntu 10.4). The problem is that they all act as simple keyboard input, and I can't seem to redirect the output from one to a specific instance of my program. I've tried something like cat /dev/hidraw5 > ./myapp, and that doesn't work. I've tried actually opening the device in my program using open("/dev/hidraw5"), and it returns success, but subsequent reads don't do anything, and the scanner output is just printed to the console.
I cant seem to install Ubuntu 9.10 at all. At 15% I get the following Error Message Input/output Error During Read On/dev/sda then I get the creation of swapspace in partition #5 of SCSI1(0,0,0) (SDA) Failed. Ive tried 6 times already. Im getting no sound at all. How can I change the screen resolution. 800 x 600 is the highest it will go. Im getting really discouraged with Ubuntu. Alot of people seem to have the same problems I am having but there is no solutions. I've checked the MEMTEST and passed, done a disk check and passed.
How do I give permission to a logged in user to stop/start a specific service without entering a root/sudo password? So they can do a simple "service SomeService stop|start" It is for a headless Ubuntu server.
my system I want user1 and only user1 to be able to mount and unmount a specific partition, this partition contains backups and is usually mounted read only, needs to be temporarily mounted read/write by user1 while doing the backup.user1 is an unprivileged user. I've read that the user option will let any user mount the file-system (and only that user can then subsequently unmount it) and that the users option allows any user to mount or unmount the file-system.I also found this in mount's man pageQuote:The owner option is similar to the user option, with the restriction that the user must be the owner of the special file. This may be useful e.g. for /dev/fd if a login script makes the console user owner of this device. The group option is similar, with the restriction that the user must be member of the group of the special file.So it looks like I'd need a login script for that user to make the user owner of the device file (/dev/voiceserv/backup in this case)
I need to search a bunch of files in a specific folder for a specific number and add all the numbers together to a total sum. I use Rsync everyday, everytime I run rsync i get a logfile (rsync output) witch contains the textstring "Total bytes sent: xxxxxx".
The "xxxxx" can vary in lenght. I need to extract the "xxxxxx" from each file and add the numbers together to a total size over a week or a month. Is this possible? And I wish to only use bash. One way of doing stuff at a time my friends .
I'm trying to configure our mail server to block email from a specific sender reaching a specific recipient. In other words, if one of our employees is getting harassed by a 'stalker', how would one go about blocking, at the MTA (Sendmail) level, a specific sender email address from reaching a particular users inbox? We do not want to capture the email - simply block it before it consumes server resources.The Sendmail server (MTA) is a front end to our Exchange server so no user accounts exist on the Linux server. We simply use it as a SPAM and Virus scanner then forward clean email to the Exchange server.
I configure squid to work with squidGuard , and all thing work properly , but there is problemfirst look to this squidGuard.confdhhome /usr/local/squidGuard/dblogdir /usr/local/squidGuard/log
Barebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?
I'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
Running 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
I searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
I am sure that this is very simple but I have installed sound juicer and the gstreamer plug ins. The problem is i still cannot select MP3 as an output output option
I don't know anything about ubuntu. Could you guys help me out. I'm pretty knowledgeable with windows if you guys need a printout of something let me know. My friends getting really frustrated about this. Help!!i
So here's the situation. He plugs his audio jack into his computer and then into the speakers but it still plays from the computer speakers.
When I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
I want to record an internet radio station starting at 2:00am tomorrow morning. The specific program on the radio station lasts until 6:00am. The command I need to run to record the station is: Code:mplayer http://wjcu.jcu.edu:8001/listen.pls -ao pcm:file=indie_heat_of_the_night.wav -vc dummy -vo nullI'd use cron, but 1. I'm not sure how to and 2. it seems unnecessarily complicated for something that I only want to run once. If cron is the only/easiest solution, I guess I'll just have to resort to that, but I'd rather not.
I was evaluating a live distro on a USB drive and the resolution got changed from my normal 1680X1050 to 1024X768. I normally run SuperOS (ubuntu derivative) at 1680X1050 on my 22" LCD flatscreen monitor. The users manual for the monitor says that the optimum resolution is 1680X1050. Now when I go to system, preferences, monitors the monitor is unknown and the highest resolution that is available is 1360X768. I have clicked on Detect Monitors but not sure anything is happening. I have went to system, administration, additional drivers but none show up. The OSD menu for the monitor is showing 1380X768. I haven't been able to make any changes to the setting. I push the button that is supposed to get me into the sub-menu but nothing happens.
I finally got audio working on my ubuntu 9.10 desktop... now I am having sound issues watching movies from a network share.The sound device continually randomly changes to "dummy output device" and then there is no sound output. The sound icon dissapears on the toolbar. To get it back and audio to start working I have to $sudo alsa force-reloadIt seems to happen everytime there is a network delay, the movie will stop for a second and then when it plays the sound is gone
I've installed Ubuntu 9.10-karmic koala-and all runs good except screen resolution. I don't have any graphic card, and with windows I never had problems...but with linux max resolution is 800x600. what can I do to set a resolution of 1024x760 or similar ?
I have googled this and I refuse to believe the answer is "older video card" or "ubuntu". Does anyone know what boot parameters to use or how to get Fedora to start the install process in a resolution other than the "Optimum resolution"? resolution=640x40 vga=ask. These do not work. They set the debug display but when the graphical portion starts it defaults to the "optimum resolution" and the message displays "Cannot Display This Video Mode". As you consider the answer, think this is a new computer, blank hard disk, etc. I am installing Fedora 10. Tried 11 and Vista seems less buggy, prefer 10 or 9.
