A few days ago, I decided to setup my emailing applications (I use mutt, with offlineimap, imapfilter, and msmtp) to use gnome-keyring rather than have my email passwords stored in plain text inside these application's respective configuration files.
[1].I am successfully able to run them from the command line myself, but looking up the passwords from gnome-keyring fails when running from cron.
I came across a person calling svn with a cron job and authenticating via gnome-keyring
[2]. I've tried to adapt his solution, but I don't think I'm doing it right. I've made a comment on the blog author's post, but am still waiting to hear back.
Does anyone know how I'm supposed to incorporate the bash function from that author's post to give cron the correct environmental variables?
I have a Windows share on my network and I protected it with a password. I access it with my Ubuntu desktop, and I saved my password the first time I accessed it. The password is saved in Seahorse (the keyring), but each time I try to access my Windows share, I have to type in my keyring password.Despite trying several tutos, I haven't been able to prevent keyring from asking for my keyring password.
I wana know the difference between PAM and GNOME-KEYRING.
I have googled both of them and I found that they both are for authenticating users. and then some tutorials say that I can use gnome-keyring with PAM support!
So what is the difference and if there is no difference how then can I use gnome-keyring with PAM?
I'm trying Lubuntu for my low-resource netbook and I'm lovin' it.
But I can't get my ssh key passphrase work with the keyring manager.
I even created a new user account with a fresh home directory and it doesn't work. You run "ssh myname@mydomain.net" and it prompts you for the key passphrase in the terminal.
Expected behavior: with Gnome, you run "ssh myname@mydomain.net" and the password manager opens a GUI to ask for the passphrase. Once unlocked, it remains unlocked until you log off. Moreover, at that moment of unlocking you can tell it to remember the passphrase forever so it gets automatically unlocked next time you login.
The keyring works fine for the wireless password, and for luks-encrypted volumes, but not for Secure Shell keys.
I'm using Ubuntu Lucid, installed lubuntu-desktop package, using gdm session manager, all updated.
I'm running an up-to-date installation of Lucid, and have come upon a little problem. It seems that applications are having trouble communicating with gnome-keyring-daemon.
When I connect to wireless networks -- even ones that are in the network manager -- it always asks me for a password.
Gwibber is crashing because it can't connect to the gnome keyring daemon.
And when I open the Passwords and Encryption Keys utility (on the Accessories menu), I get the error: "Couldn't communicate with key ring daemon."
I have verified that the daemon is starting up when I log in, that all of the appropriate keyring-related login items (certificate and key storage, secret service, & SSH key agent) are in place, and that the keyring works in other accounts on my machine. I have tried deleting my extant keyrings, but that has produced any success. And when I kill and restart the keyring daemon once I'm already logged in, the problem seems to abate.
I don't know if it matters, but for OS X compatibility purposes, I'm running as a UID under 1000.
For a while now, firefox has been prompting gnome-keyring (twice)
There is one applet i know of on my system that wants me to enter my keyring pw twice "CPU Frequency Scaling Monitor" (i have a core2-duo cpu, a monitor for each cpu), but i have no clue why ff would be invoking a change in how ubuntu controls that app.
Is there any way of finding out, which application (or perhaps an add-on?) is actually asking for my keyring-pw (the input window just says "an application..." not like e.g. "synaptic package manager...".
but it doesn't seem to be accessible. Seahorse says: "Couldn't communicate with key ring daemon", and I never get asked to unlock my keyring on login (thus saved wireless keys are not available, for example). If I kill the gnome-keyring-daemon process and run it again from the command line, everything works. There are not messages in /var/log/messages from the keyring daemon, so i don't know what it is doing wrong.
I have Ubuntu 10.04 configured to login with Kerberos (as in [url]). Everything works fine, except gnome-keyring-daemon:
-If I login with a local user, gnome-keyring-daemon works right. Besides, the keyring is automatically unlocked with the login password.
-If I login with a Kerberos user:
- The session startup is considerably slower.
- /var/log/auth.log says something like:
Code:
- If I execute a program that needs the gnome-keyring (like Evolution), is desperately slow, and it says:
Code:
Message: secret service operation failed: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
- If I kill all gnome-keyring-daemon (killall gnome-keyring-daemon), start a new one (gnome-keyring-daemon), and restart the application that uses the gnome-keyring, it works fine, but it ask me for the password to unlock the keyring (I think that this is the normal behaviour if gnome-keyring-daemon did not start before).
I have seen the configurations in /etc/pam.d and everything looks fine (with pam_gnome_keyring.so). Indeed, I think that if something was wrong here, the local user would not have the keyring unlocked automatically.
How to permanently disable the gnome-keyring-daemon.
I've seen posts where there was a work around to store passwords in clear text. That's not a real solution. I've seen posts where killing the process and removing ~/.gnome2/keyrings is a temporary solution until next time you log in or reboot machine. Removing the package, will force removal of the whole kitchen sink. That's too intrusive.
There must be a way to stop this thing from starting up, ever.
I tried commenting out the entries in the /etc/pam.d/* files that refer to "pam_gnome_keyring.so", and have also unchecked the 3 keyring related entries under System --> Preferences --> Startup Applications, which are affiliated with these 3 files:
But I still get this one process once I log into the console window:
There must be one more file somewhere that says, "hey when someone logs in and starts up gdm, start the gnome keyring daemon".
For several weeks now I have been experiencing a problem with GNOME keyrings in Fedora 10 x86. Here is the thing: somehow out of the sudden GNOME started requesting the "Default Keyring" in order to connect to protected wireless networks it already knows. I don't remember having set one, maybe I did, and just in case I tried all my passwords to no avail.
On the other hand, XFCE, the desktop environment I use the most in that machine, has lost its ability to 'remember' passwords, which is a little painful in the long run.
I wouldn't want to just delete the keyrings because there are many stored already, and I want them back. Needless to say I have root access to the machine. Is it possible somehow as root (or as user) to fix that problem and restore both access to the stored passwords and the ability for Network Manager to remember them?
Just to be on the safe side I created another user and that one 'remembers' the stored passwords and is not prompted for the "Default Keyring".
F15 from fresh install off LiveCD. I find that on fresh login my ssh agent situation is a bit confused.
I normally ssh-add my keys to the authentication agent, and then ssh to remote hosts without thinking too much about it. Recently, the ssh command has been hanging. Running with -vvv shows it stops at the point it should talk to gnome-keyring:
At that point it hangs and a ctrl-c will kill it.
The ssh-add command cannot connect to the ssh agent:
If I run to that ssh hang again, and this time grep ps for keyring:
I haven't had any gnome-keyring-prompt window appear on my desktop. Checking all workspaces, and using the Gnome 3 Overview screen to visually view open windows, doesn't show it. "kill -9 2101" returns the hung ssh attempt to the prompt immediately. Thinking about it, I don't believe I've had the Gnome 'enter your password to unlock your keyring' prompt once since installing F15.
I noticed that SSH_AUTH_SOCK seems a little confused:
So it seems that gnome-keyring-daemon is using one tmp directory while my shell has been set up with another. If i manually set the SSH_AUTH_SOCK variable, things start working again:
As I now have to reset SSH_AUTH_SOCK in every terminal I want to use the agent in.
What's the next best step to investigating why the gnome keyring prompt isn't appearing, and how the SSH_AUTH_SOCK variable is getting mismatched with the gnome-keyring-daemon's tmp dir?
I want to store my svn password in the gnome-keyring so it is encrypted and 'secure'. I made the necessary changes to ~/.subversion/config, but even after running a few svn commands, I do not see an entry for SVN in the keyring.
What else do I need to do to get SVN using gnome-keyring? I will also be using this with git-svn.
I have never configured any keyrings. I set up Evolution, and it's working, but sometimes Gnome wants me to allow it to access the default keyring to get the email password. It takes 3 cancel-deny tries to finally dismiss this dialog box, after which Evolution is working fine. I see that this is not an Evolution thing. Other users report the same thing in VINO, and on wireless access. The GNOME forum seems to think there is a bug when accessing severs, and has a bug and milestone. Some other distros have the same problem.
One user says that they were able to Delete the default keyring (which must have had an unknown default password) and then create a New default keyring with thier own password. This seems to have solved that user's problem. However there were no instructions on how to do it. I think someone else was able to just stop the default keyring daemon. That would work too, although it's not as elegant. I'm now unable to find instructions.
NetworkManager stores its connection secrets in a keyring called "default". I am prompted to supply the keyring password every time I log in, regardless of whether I select the "automatically unlock this keyring when I log in" radio button.
After launching the gnome-keyring-demon my mounted mp3-player is no longer accessible. In /var/log/messages I get the message "gnome-keyring-demon removes usb device". As long as the gnome-keyring-demon is running, I cant not remount the device though it is visible using lsusb. I'm running an FC12 system.
I am running Debian testing with XFCE and have been trying various GTK email clients looking for something I like. So far I like Balsa but everytime I start the program, Debian asks for my gnome-keyring password. How do I kill this behavior?
Is Epiphany the only browser for Gnome supporting password storage in keyring?Firefox and Chromium both seem to store login credentials in own storage thus limiting interoperability.
I want to access files on my external harddrive through GNOME, beyond plugging it into my computer via USB I have no idea what to do next..I think it has something to do with a mount point or the 'mount' command...to summarise, my question is how can I access extern. HardD through GNOME?
I just got a fresh Debian squeeze install done on an older laptop. I used a lenny CD to get the machine running and it died half way through the installation. I fixed it and got gnome to run just fine as root. After that, I upgraded to squeeze and now the machine runs too slow to do anything with when gnome starts. It just sits with the HDD access flickering constantly. I let it sit for a few hours like this before I pulled the plug. It works just fine if I run in terminal only mode. Not sure what is wrong. Also, I can only seem to log in as root. My personal account says bad user name or password. I don't know why. Don't know if they are related. Any ideas what might be wrong? I can't even get a terminal going with X running to use top, so I can't even look at what is running.
in attempt to dualboot w7 and opensuse i manage to screw windows boot loader. I was hoping that with opensuse live cd i'll successfully save my data but i was wrong. I can't browse any of partition with any of browsers inside liveCD including dolphin. When i try to access it says: There is no application installed that can open files of the type block device (inodelockdevice). Do you want to try to install one? Is there another option to access partitions because I can't install another browser on live cd.
I put in my cron entries to run my backup script which rsyncs my data to my 2nd drive, however on a hunch I checked my backup drive which mounts automatically via fstab and I realize it had not ran in a while. I checked cron and there were no entries for it. I got to wondering if I should ever be worried about a cron update coming down and over-writing my existing cron file with the backup entries in it to run.
I have added some executable scripts to /etc/cron.daily but don't get the stdout/stderr output from them as mail (or anywhere else I have found). At least one of them is running (because I can see that it has added a file to the disk).
The peculiar thing is that I do get the output from /etc/cron.daily/0logwatch (part of the logwatch package) as an email each day.
The MAILTO line in /etc/crontab is "MAILTO=root" (unchanged from default). Same for /etc/anacrontab.
I do have an alias at the end of /etc/aliases which redirects root's mail to my own account, but this alias works fine for mail I send manually. (It also appears to work fine for the output from the file /etc/cron.daily/0logwatch.)
I downloaded Adobe Air, both the rpm and the .bin versions. First I tried the rpm, it went through the motions of installing but just disappeared. then I tied the .bin, got tot the installer, accepted the license, entered my root password, but it stopped installing with "an error occurred. Adobe AIR could not be installed. Install either Gnome Keyring or KDE KWallet before installing Adobe AIR". I opened Kwallet and tried again, but to no avail. I am running OS11.4 64 bit. What can I do to get this thing working?
