Ubuntu :: Won't Load GUI - Only Text ?
Oct 12, 2010
First off I have never been too great with Ubuntu but I have been using it for several years now. I had 10.04 and upgraded to 10.10 last night. The installation and download all went smooth and there were no errors. It asked me to restart and I did but now it is acting funky.
Instead of loading my new 10.10 normally it leaves me at a text screen where it says: "lucian-laptop login:" its basically a command line prompt. I can enter my credentials, it will then ask me for my password, and then it leaves me at this:
"Welcome to Ubuntu! * Documentation: [url]
0 packages can be updated
0 updates are security updates
lucian@lucian-laptop:`$ "
I can type in commands at this point but I don't have any idea what to do. I just want to get to my normal GUI and use it like I normally use it. I need this laptop for school so this problem is quite crippling at the moment.
And my laptops names is "lucian-laptop" and my username is lucian, not that you guys didn't already figure that out
I tried booting in recovery mode and it will get to the point where it will ask me what to do and if I say resume it just dumps me back to the prompt.
Also once it did a disk check and then again after completing this dumped me back to the prompt.
If I shut it down I at least see that pretty splash shut down logo.
View 9 Replies
ADVERTISEMENT
Jan 12, 2010
Ubuntu Software upgrades indicated that there were some Firefox updates available. While updating, computer screen went blank and froze up. I manually shutdown and after restarting, Ubuntu no longer loads. It goes through some steps but then it goes to a login/password prompt. After putting in a login and password it takes me to, what I think is "Terminal".
I am a newbie, but I love to learn. I'm reading the Pocket Guide right now. I have many questions. What can I do at the "Terminal" prompt? An even better question is: When I have a problem after an install or update, can I do a "recovery" to before the install/update? If I continue to have problems, is there a way to recover the OS without losing saved data?
I'm hoping that I will learn a lot from the Pocket guide. I think that Ubuntu is going to be the OS of the future.
Why does "Ubuntu" still come up as a misspelled word in this text box?
View 4 Replies
View Related
Feb 20, 2010
I'm having a strange problem with gvim. I've installed Slackware on 4 computers now, and this latest one is the first I've seen this issue on. I use the command line for almost everything, and only use gvim in Firefox with Vimperator. So it isn't something I use all the time, but when I need it I really need it. Using textboxes (like, you know, on LQ) is starting to drive me up the wall Anyway, when I load gvim (through Vimperatorr other means) the text is unreadable. It does seem to become readable after it gets covered by another window, but as I type, the new text is unreadable again. Attached is a screenshot, of this post. And, actually, I'm seeing similar behaviour in Gimp.Attached is a second screenshot. The weird lines seem to appear and disappear when the mouse rolls over the area. I don't use very many GUI programs, just Firefox for the most part (which isn't displaying this behaviour). So, this could be a general X issue, or perhaps a WM issue.
View 1 Replies
View Related
Jan 29, 2011
I have a .txt file with the format
0.01
0.04
0.07
...
0.83
I am wanting to load this into octave and perform operations on the data.
[Code]...
View 2 Replies
View Related
Feb 16, 2009
just built a computer and wanted to try out some linux.
First off I burned the Fedora 10 x86_64 disk image (using disk utility on my mac at 4x speed then verified it) to a dvd. I start the install. "x startup fails to load, falling back to text mode" comes up. I use the text install then. It gets to the actual installation of the different packages then a black screen shows up with white text that's highlighted red (sometimes it's blue). It then freezes and I reboot. Sometimes it freezes at different points and with different messages, but the description above is what happens most often.
I try writing it at 1x speed and verifying. same thing.I try the Live CD. It freezes.Then I tried Fedora 9. same thing.
Next I go to Ubuntu 8.10.I try the regular install, but the orange loading bar freezes.I try the Live CD-like install. It runs!...but when i go to install, when it gets to the partitioning part, it freezes and becomes unresponsive.
Each time it froze I let it sit for about 10 minutes, just to make sure it is in fact frozen. I've tried these installs numerous times.
View 9 Replies
View Related
Mar 21, 2010
I'm looking for a light-weight text editor for general-purpose composition that can preserve indentations on wrapped lines.
View 3 Replies
View Related
May 11, 2010
Is there a simple text editor for Linux that will let you color or highlight text on demand? Something like gedit or leafpad with color? I know I can probably do this with vi or emacs, but I'm looking for something simple, need not be feature rich.
View 4 Replies
View Related
Oct 2, 2010
When i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
View 2 Replies
View Related
Jun 17, 2010
The new feature in Gimp 2.7 that attaches basic text formatting options (bold, italicunderline, strike-through) to the active text box is either buggy or just bad design.The text edit buttons are actually being placed on top of the text box (which contains text) instead of off to the side, and that is causing me to not be able to see the text.See screenshot for example:GIMP version: 2.7.1Am I doing something wrong or are others experiencing this too?
View 1 Replies
View Related
Dec 6, 2010
I am looking for a way to keep a log and make if then statements if a line exitsts in the log. I also am looking for a way to make a simple loop, like goto line number, and I also am wondering how to add/remove bits of text from a text file (plugins line in server.properties)
View 5 Replies
View Related
Feb 26, 2010
I'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.
So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts).
Its so weird though that live version works and the installed version does not.
Here are my specs:
I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.
View 3 Replies
View Related
Apr 2, 2011
I put a text file on my desktop and added a couple lines of text with gedit. File type shows text/plain. Double-click opens the file in gedit which is what I want. I'm using the file to temporarily hold some snips of code that I copy from file to file, but when I copy some html into the file and save it, now file properties show it's text/html and a double-click opens the file in firefox, which isn't what I want. Is there some way to keep the file type from changing itself?
View 6 Replies
View Related
Feb 10, 2011
I'm running and XP virtual machine using KVM / QEMU. THere are time when I need to copy text from an application in the Fedora host machine and paste the text into a different app in the XP guest machine. I was able to do this using Vitualbox on an earlier version of Fedora.
View 1 Replies
View Related
May 2, 2010
i am on processing text tasks And i found that if you assign a text to a variable is chomp'ed automatically the newline
Code:
variable=$(cat file.txt)
The problem is i can only access the items/lines using:
Code:
for line in $variable
do
echo $line
# Other commands
done
how do i convert this to an indexed array. More importantly, how do i get access to individual $line[0], ..., $line[n] Another thing, if the file.txt, has lines with spaces it is a mess using the for...in..., but echoing prints line by line...o_0
View 11 Replies
View Related
Jun 1, 2010
Can I use sed to include a text file in the beginning of other text files inside a folder and its subfolders? So it should be recursive.
View 4 Replies
View Related
Sep 8, 2010
I un-installed a few files related to Java yesterday (maybe I removed something else by mistake, I don't think so but I'm having trouble reading log files) and now every piece of text, excluding text rendered by the browser from webpages, is displaying as rectangles.
Trying to start Firefox reports:
Quote:
(firefox-bin:2185): Pango-WARNING **: failed to choose a font, expect ugly output. engine-type='PangoRenderFc', script='common'
(firefox-bin:2185): Pango-WARNING **: failed to choose a font, expect ugly output. engine-type='PangoRenderFc', script='latin'
Segmentation fault
View 2 Replies
View Related
Jan 19, 2009
I need to insert 3-4 lines of text to the beginning of a text file. The file is a largish MYSQL dump, the result of a backup shell script. This shell script should insert the required text.I've wrestled with sed, but lost.
View 2 Replies
View Related
Jan 13, 2010
I have to delete a certain line of text from the a textfile via ubuntu's shell scripting.I have done research, and it seems that most people advocate the usage of sed /d option. sed makes does not edit the text file. Hence, most options I discovered involved the use of a temporary variable/textfile and then overwriting the old file with the temporary new file. Is there anyway whereby I can bypass the use of temporary storage containers? I hope there is any magical combination of commands to edit the file directly.
View 3 Replies
View Related
Jan 8, 2011
I want to display something in my text view widget in glade using c code. that's all right.
now I need to attach a save button beneath the text view.so that on click the text view content should save as a txt file..
View 8 Replies
View Related
Feb 9, 2011
I want to display the contents of a particular log file (simple text file, I mean in Linux). But there is a problem: The contents need to be organized in a fixed format. Have a look at this log file:
sampleLog.txt
Code:
User Name: XYZ
Reported Problems Description: Blah! Blah! Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah!
[code]....
So, while displaying the contents of above file on a web page, I want to format the field names found in the log file: User Name:, Reported Problems Description:, and Remarks:. These fields may contain a variable length of text and no specific line number is assumed for them to appear on.
The desired output should look like this:
User Name: XYZ
Reported Problems Description: Blah! Blah! Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah!
[code]....
Well, what I am trying to do may sound wierd to some of you. The filed "Reported Problems Description:" can possible contain text which embeds colon (.
View 15 Replies
View Related
Nov 5, 2009
I would like to write a text user interface (TUI) to adjust some text config files etc. Is there a tool or application for creating TUIs like this. I�m talking about those types of config tools which you see executed at first boot.
View 19 Replies
View Related
Jan 10, 2011
since some days I have a strange problem with KMail (1.13.5) in KDE4.5.5. When I try to copy some text from an email and past it to any other program (e.g. Openoffice), not only the marked text will be pasted, but a kind of HTML code including the text.
This bug is not OpenSuse specific. I found the same bug in a Fedora mailing list (of course, whithout an answer): Strange Copy/Paste behavior in KMail 1.13.5/Kontact 4.4.8
View 6 Replies
View Related
Feb 9, 2009
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
View 2 Replies
View Related
Jan 15, 2010
may be an advanced question but I need to know how to do this. Here at work I am in charge of recruiting and we have about 1,000 resumes in already. All of the resumes are in a .pdf format. I need to rename every .pdf in the following format:{firstnameLastname}.pdfThe only way I know how to do this is to convert all the .pdf files to text, extract the name out of the first few lines of text, import into excel, and then use VBA to rename the files in mass:Here is my logic so far:~Deskop/a = houses all the .pdfresumesOpen terminal: Code: cd ~/Desktop/afor f in *.pdf; do pdftotext -raw $f; done That will convert all of the preceding resumes into text filesNow I would like to append the name of the text file into the last line of the text file. So, for example, for Resume1.txt, I want to append "Resume1.txt" to the last line within Resume1.txt. So after I run the command I open Resume1.txt and on the last line within I want to see "Resume1.txt" on the last line, at the end of the resume.How can I do this? I would like to use a loop and have the terminal append the filename to the body of the text file until all of the have been appended.
View 1 Replies
View Related
Jul 17, 2009
I was trying to install GTK+-2.8.20, so I installed it's necessary dependencies in this order:
pkg-config-0.23
glib-2.20.4
pango-1.24.4
jpeg library
tiff library
cairo
And I was about to install the last dependency: ATK (Accessability Toolkit).I opened the Archive Manager to extract the "atk-1.26.0.tar.gz" file (yes, I'm still switching from Windows so I'm fond of GUI), but I noticed all the text in that window was boxes, like the □ type box for every letter of text.So instead I thought it wouldn't be a big deal, because the terminal and regular windows weren't screwed up.I opened a text file in gedit (reference to commands in terminal, such as how to extract files via terminal), but yet again all of the text was □-like boxes.
View 2 Replies
View Related
Apr 21, 2010
Currently, when I'm searching text in files of my PHP project, I use this line :
Code:
grep -r 'myTextToFind' *
But now, I would like to search only in ".lang" files. How can I do that ?
View 7 Replies
View Related
Oct 28, 2010
EDIT1: I should note that I was trying to do this in PERL, not sure if other alternatives are more simple?EDIT2: I should note that for text file 3 (reference), it's a long list of MANY cnp_id values and their corresponoding chr, start, and end values. So, the code will have to take the cnp_id from text file 1 and/or 2 and search through textfile 3 (reference) to match on the cnp_id and then take the corresponding chr, start, and end values and add to the relevant line in the output.EDIT3: Sorry, I should mention that the text file entries are all tab-delimited.I have 3 text files:File 1:Columns represent sample IDs (sample_id) and rows represent CNP IDs (cnp_id). Cells represents the confidence level (confidence) for each sample and CNP.Quote:
cnp_idP5E6_SNP6.0_JHP5_010408.CELP5E11reh_SNP6.0_JHP5_011808.CELP7C7_SNP6.0_JHP7_021208.CEL ... etc.
CNP100.0044798340.0027929510.00305613
[code]...
View 6 Replies
View Related
Feb 13, 2010
I am trying to find sed command combination to print out the "start command" line, the id line and all lines between "details" and "stop command" only if "error" exists. Here's the original output (test.txt):
start command
id 1
kajsdlfjsalj
[code]...
View 3 Replies
View Related
May 3, 2010
a sed command to add a text before line number in text file? I have text file with 500 lines, and i want to add 3 more lines with text after line 300, OR before line 302, isn't no problem.
View 16 Replies
View Related
Aug 8, 2010
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
View 3 Replies
View Related
