I've been able to run *.*msi files in the past through WINE. Apparently the latest version of Ubuntu is blocking the action of launching my *.*msi file. Any way of unblocking this? Uploaded with ImageShack.us. BTW, the app I'm trying to install is Steam.exe.
View 2 Replies
I am trying to make a custom launcher for a playlist file to open in VLC player. In the command part I have the path to the file like this:
/home/mike/Videos/newTv.m3u
What am I doing wrong cause when I try and launch it I get this error:
Details: Failed to execute child process "/home/mike/Videos/newTv.m3u" (Permission denied)
This is my problem
bash: /usr/local/uvlayout-pro/bin/headus: No such file or directory
but the file exists. If I uncheck the Allow execute as a program the error is
bash: /usr/local/uvlayout-pro/bin/headus: permission denied
I used the sudo command.
(I tried to change the folder permissions to read and write, cause if I didn't, then the file, when not in nautilus, had an x in the top right of the icon. Before this it didn't work anyway)
Fedora 14 i can run a program with another user with:
But:
it doesn't work, if i put the command in a .desktop file.
For system calls, is blocking or non-blocking default in C? Simple question, just am not seeing the answer super quickly.
View 4 Replies View RelatedI have a device that is working on modbus protocol andI have written a small program(with block TCP read method ) to read its registers via modbus protocol.my program is working very well but except those times that I unplug the Ethernet cable or turning off the modbus gateway during programs work.at this time my program stops on recv system call (if it reach this system call exacly when I unplug Ethernet cable or turning off the modbus gateway during programs work).I changed my source to work in nonblock TCP method, at this time with the same situation my program does not stop/block on recv system call but after pluging back the Ethernet cable or resuming the connectivity situation back it reads data incorrectly .this is my code:Quote:
#define DEBUG
#include <fcntl.h>
#include <string.h>
[code]...
since I upgraded to F15 I noticed that "su -l" is very slow, it takes about 20sec before it gives the prompt. I traced it down to a problem with "xauth" as su asks for the authorization for the display running "xauth nlist :0" which times out with an error. Actually, the command "xauth nlist :0" by itself gives:
xauth: timeout in locking authority file /home/user/.kde/tmp-host.domain/xauth-200-_0
If I put SELinux in permissive mode both command work without problem so I suppose SEL is the problem. I checked the permissions and settings of the file which is "unconfined_u:object_r:config_home_t:s0" but I have no idea if this is the right value, running "restorecon" on the file, directory or the whole /home/user didn't change anything.
Dual booting Mint 8 and Windows 7. Windows is reporting a file system error. I go into properties and check for errors, but since it's in use it asks me to reboot. I do, and grub comes up. I select windows and it just takes me to windows without checking the file system.
View 1 Replies View RelatedRunning Red Hat (not sure of the build atm) and I need to be able to put all of the IP blocking in a separate file. It will eventually be uploaded to a large number of hosting accounts, and modified from time to time...so it isn't feasible to modify that many httpd.conf files each time we need to add an IP to be blocked. In httpd.conf I can add the "Deny from" line to the following directive and blocks it just fine:
Code:
<Directory "/var/www/html">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
[code]....
There is an include to pick up all *conf files in ../conf.d, and everything else in there is working just fine. I created a file called robots.conf; it currently has a set of mod_rewrite rules which work. So I added this to that file:
Code:
<Directory "/var/www/html">
Order allow,deny
Allow from all
Deny from 123.456.789.098
</Directory>
It is not blocking access from the IP with it in there.I've done all of the usual things; restarted Apache, cleared browser cache etc. I can also block it using that same directive in a local .htaccess.
when I tried to install wine I got "Missing Dependency: wine-gecko is needed by package wine"so I looked for wine-gecko and download it but also when I tried to install it I got "Missing Dependency: wine-gecko is needed by package wine"it seems that I am in loop each package need the other what to do please?
View 1 Replies View RelatedI'm using Ubuntu 10.04 after using 8.04 quite happily for several years. I'm presently trying to get Wine to run a small Windows app that ran with Wine in 8.04 and I get this message.
End-of-central-directory signature not found.
Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on the last disk(s) of this archive.
zipinfo: cannot find zipfile directory in one of /media/30MINUTE/setup.exe or
/media/30MINUTE/setup.exe.zip, and cannot find /media/30MINUTE/setup.exe.ZIP, period.
I've installed Wine Windows Microsoft Windows Compatibility Layer Beta Release from Ubuntu Software Center.
I am running Ubuntu 9.10, I have Wine installed. I wish to load the file 'NoteTabPro' an .exe file into Wine, but am unable to do so. The NoteTabPro file is in my Desktop area, downloaded from Fookes software; was told it would load automatically into Wine (as the trial version did, and the NoteTabLight version), but it did not? How do I go about doing this please? I know that it can be done, I just haven't found the right buttons to push.[URL]..
View 6 Replies View RelatedI have an old copy of daemon347.exe.I tried to run it using wine (right clicked on the file and clicked "open with wine"; also tried the "open with wine program loader" option.)After agreeing to the license agreement, I clicked the "Next>" button. But then the setup terminated.I do have an alternative for daemon - the ubuntu mounter. But this happens with quite a few .exe files. Is there a more correct way to operate wine? Either the setup files terminate after a few windows or a few setup files don't run at all.
P.S.: I have Ubuntu 9.10 amd64
have bought the game Rollercoaster Tycoon 2 from Trymedia.com and Gamestop.com, and whenever I download the .exe file, I can never open it. I tried the .exe file in Windows and it is a program set to download the actual Rollercoaster Tycoon 2 game.I have tried it alone with Wine AND with PlayonLinux.
View 9 Replies View RelatedHow can I install wine with just the wine-1.1.35.tar.bz2 file? I have it on the computer via file transfer on cdrw. I need wine to install the software for my wireless usb so I can connect to the internet
View 2 Replies View RelatedI downloaded a game and used wine to install/run it. It plays perfectly fine the first time, until I exit the game and want to run it again. When I try to run the game again, it says that the files are corrupted. how can i fix this?
View 3 Replies View Relatedwhen I try executing a file in WINE that was a C++ and was compiled into a .exe I get:
Code:
fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.VC90.CRT" (9.0.21022.8)
err:module:import_dll Library MSVCP90.dll (which is needed by L"Z:\home\server\ms\MCServer.exe") not found
[code]...
i need to install a .dmg file on Ubuntu, is this possible?
View 8 Replies View RelatedHow to run .exe file without wine
View 4 Replies View RelatedI downloaded Wine from [URL] and installed Wine 1.1.32 and it stated that I'm missing a file can anyone tell me what the deal is? do I need something more or ignore it?
View 1 Replies View RelatedI got wine installed,.. about 1/4 in to the installation it says 'file missing' or something
View 3 Replies View RelatedI am trying to run a program under wine which needs to use a license. The program is unable to check out the license file.
View 3 Replies View RelatedAt some point my wine install died. I haven't used it a lot and I update my Fedora 11 regularly so I'm not sure what made it break. I thought "ok, just see if there's an updated version". 'yum info wine' says there is an update version and the file is 27k in size. Tried installing and no joy. Tried erasing wine and then installing; no joy. Yum says that the X86-64 and the i686 version are both 27k in size. I know for sure that is wrong. On a semi-nonFedora note, I tried compiling my own version of wine. It compiled fine after installing some dependencies and '-devel' files, but it gets the same crash as the Fedora version was getting.
View 10 Replies View RelatedTrying to mount my NTFS file system (portable hard drive) so that is can be recognized by a program I have installed in wine (seagate manager). I've tried to change the mount point for the drive to /home/.wine/c_drive but that doesn't seem to do the trick, and messing around with the fstab file just results in error messages when I try to mount/unmount the drive.
who to change the mount point properly? /dev/sbd1 is my partition.
Either that or does anyone know how to configure wine so that it will find my drive? I've tried adding an e: drive to the drives tab and mapped it to mediaSimons' Seagate (partition label), but that doesn't seem to do the trick either.
I've installed wine several times in ubuntu 11.04 but after the installation when i click on the wine icon it gives an warning message "The file 'wine' is not marked as executable. If this was downloaded or copied from an untrusted source, it may be dangerous to run. For more details, read about the executable bit."
View 1 Replies View RelatedI have a bug where WoW under wine is crashing my computer, and I want to get the data from the console, so I want to put it in a file, but I don't know how! None of the piping tutorials online helped at all.
View 2 Replies View RelatedI'm doing so because my doubt is with regards to running a windows app in linux. I am a freelance writer and use article spinning software like "TheBestSpinner" occasionally. Usually I log into windows XP (I have a dual boot) for this. I am however trying to see if it is possible for me to run this software in linux using wine. I am still relatively a newbie in linux as I have been using Mint 10 for only 6 months. I'm am familiar with the command line but generally use the GUI mostly. I installed the software but when I tried to run the .exe file I got an error that said that I had to install mono for windows. I did that too and installed it inside wine. I am now getting an error that I am unable to resolve by myself because google is not helping me. I am posting the output of what I get when I try running it below.
fixme:system:SetProcessDPIAware stub!
fixme:dwmapiwmIsCompositionEnabled 0x33bc74
** (TheBestSpinner.exe:27): WARNING **: mono_class_from_mono_type: implement me 0xb6 **
ERROR:class.c:5162:mono_class_from_mono_type: code should not be reached
I want to install kindle in kubuntu. I seem to have successfully installed wine and and added ms explorer.exe. but when I click on Browse C drive...
Unable to run the command specified. The file or folder file:////Documents/.wine/dosdevices/c: does not exist.
I'm trying to open Microsoft .chm file with wine on Linux but when it opens its only the content tab on the left pane that the text gets displayed i.e. the table of content but the right pane where the content of the pages are meant to be displayed is blank. I'm running fedora 13 and I installed wine via yum.
View 2 Replies View RelatedI installed wine and I installed one of my file ccnaexploration.exe using wine. After that I ran it from applications>wine>programs>exploration4.html. It opened with the browser google-chrome and I launched the "Launch course". It didn't work after that. I tried with firefox also. It didn't work with firefox also. I installed other .exe file using wine. That other .exe file is working. I only have problem with exploration4.html. I have posted the .html image also. you can check it out.
View 1 Replies View Related
