Ubuntu :: Windows 7 And Dual Boot Fail, Repartition?
Apr 17, 2010
I already had Windows 7 installed and decided to try out Ubuntu--just to, you know, mess around with stuff. During the partitioning part of the installation, I didn't pay attention as to how much space/volume I would shrink Windows down to, so I just went ahead and pressed forward with the default amount already on there (all of of the space went to Ubuntu, I'm thinking).
Now whenever I turn on my computer, I get a grub menu. On the list is Linux xxxx, Linux etc (blah blah blah), and then Windows 7 loader. It doesn't work, and suggests that I put in the Windows installation disc.
This is what my partitions look like on Gparted:
I have the installation disc. Somewhere.
I'd like to keep the dual boot on Ubuntu and Windows 7 if that's possible.But since Ubuntu is already working, if it's easier to just delete Windows 7, I'd like to know how to do that, too.
View 4 Replies
ADVERTISEMENT
Jul 28, 2010
I would like to combine my Linux partition (/sda3) and /sad1 to give me more disc space. I would also like to combine the two unallocated partitions to install a Windows 7 dual-boot with Ubuntu. How would I do that without totally raping my current Ubuntu install?
View 1 Replies
View Related
May 25, 2010
I have a dual-boot Fedora / WinXP laptop, and the F13 upgrade failed soon after the 'upgrade' option was selected in the menu.The problem was that the installer could not recognise the ...ntfs-3g.. entry for WinXP in /etc/fstab.The fix is simply to change this entry to ...ntfs... and the install will then proceed OK.
View 9 Replies
View Related
Jan 2, 2010
I just attempted to install ubuntu for the 4th and 5th time and have yet again had a fail. This time it actually completed the installation, which is a first. however upon reboot it takes me directly to Vista - I don't see grub or a o/s selection choice.
View 9 Replies
View Related
Jun 2, 2010
I had a machine that dual-booted Windows 7 and Ubuntu 9.10. This past weekend I thought I'd upgrade to 10.04. I obviously selected the utterly wrong set of selections when prompted during installation to pick partitions for GRUB2 to manage. I am sorry I can't say what I picked, but I can tell you the results:
* Ubuntu 10.04 boots fine
* Windows 7 just blinks with a flashing cursor in the upper left
* I do have my Win 7 install disc and used the "repair" option and the command line commands, but the repair disc does NOT see any valid Windows partitions... no C:, nothing. I can't run the various repair options I've seen online because there's nothing to run it on.
* I can see the Windows partition when booted under Ubuntu... all the data is still apparently there.
* I've seen various threads about restarting with the LiveCD and re-running GRUB2 but am not sure I've seen a definitive page on how to re-run GRUB2 and what to select once I've done so.
I would be happy to get both Win 7 and Ubuntu bootable, but barring that, I would like to get Win 7 back with everything intact. If the easiest path forward is to reformat and reinstall Win 7, that's less fine but doable -- I've backed up what I can via Ubuntu to an external drive.
View 3 Replies
View Related
Jan 4, 2010
I want to install Ubuntu in a dual boot with the Windows XP that came preinstalled on my netbook. I do have an external CD/DVD drive, and my hard drive is 140 GB with 35.7 GB used by XP.
View 6 Replies
View Related
Jan 25, 2011
Before we begin just some general information, I'm running on a 64-bit HP Pavilion dv6; This laptop is something you would buy off of best buy's show floor. I installed Ubuntu through wubi in windows 7. I have a 500 GB Hard Drive. As of right now I can explore the windows 7 part of the hard drive.Now the problem began on Friday January 21st after I shrunk my Windows parition by 100GBS leaving around 370 GBS left in windows. Then I went into Ubuntu to try and format the 100GBS to create a space so I can share media in between windows and Ubuntu. ( At the time I didn't realise I could already go into the Windows Partition).
View 9 Replies
View Related
Mar 5, 2010
I got a new laptop today (yay) with windows 7 on it. I want to keep a small windows partition, just in case I need it for something. Anyway, I know how to use fdisk, and am comfortable installing on a disk without data I need to maintain.. but this new computer came with 5 (!) windows partitions. I don't know where to start.
I don't mind reinstalling windows after partitioning if I have to, but I really don't want to screw up the recovery partition. Any clues on where to start or what to look for? Or what NOT to do?
It looks like "my computer" has two partitions listed (c: and d: ). I guess I could just take note of the size of these two partitions, free up the partitions that match in fdisk, then repartition that space and install everything.
I need to reboot to do that, so I'll edit with the information when I have it.
fdisk output:
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x8e0eee9e
[Code]....
View 11 Replies
View Related
Jan 21, 2010
I wanted to update to the latest ubuntu but was short a couple of gigs in my linux partition. So i created a Gparted Live bootdisk and repartitioned my hard drive: i took 5 gigs from my mac os partition and moved it to the linux partition...
After that i could no longer see any boot option aside from Mac OS when starting the computer with the option key held down. So i thought maybe rEFIt might be the solution (i have no idea what i'm doing really) and installed refit. I'm not sure what that achieved - i can still only see one boot option (mac os - although it's now named 'refit'...)
View 1 Replies
View Related
Apr 25, 2010
I downloaded Ubuntu 10.04 and I want to make a dual boot with Windows 7 Ultimate using Windows Boot Manager...
I deleted my last Ubuntu OS (9.10) just because of GRUB
View 2 Replies
View Related
Jan 19, 2011
I recently moved and didnt have internet. Out of a fit of boredom i decided to get me Ubuntu 10.10 disk and dual boot. My laptop has a SD slot in the front of it that has never been used so i decided that itd be cool to have ubuntu on an SD card that i could boot any time. I used the default installer to install it onto the SD card instead of using the Universal USB Installer (i imagine this is where i went wrong). It installed and everything works fine and when i boot up it lets me choose between Linux and Windows when the SD card is inserted. When it is not i get this screen http://imgur.com/gg63v. The only really problem is me worrying that the sd card will be lossed or get broke and i will no longer be able to access Windows. Is there anyway i can set the windows boot loader back t the default bootloader (i think this is what need to be done i may be completely wrong>
View 3 Replies
View Related
May 7, 2010
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
View 3 Replies
View Related
Apr 30, 2010
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
View 9 Replies
View Related
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
View Related
Jul 18, 2010
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
View 2 Replies
View Related
Apr 10, 2011
I have a jpeg file on my Windows system that won't delete. However, when I try to boot into safe mode to delete it, I can not get into the menu to select "Safe Mode". F8 just boots me right into Ubuntu.I have Windows 7 and Ubuntu 10.10 on an Acer Aspire 5520.
View 3 Replies
View Related
May 7, 2010
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
View 1 Replies
View Related
Nov 8, 2010
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
View 8 Replies
View Related
Jan 5, 2011
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies
View Related
Jul 3, 2011
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
View 8 Replies
View Related
Jan 6, 2011
it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
View 9 Replies
View Related
Sep 4, 2010
I've got a win7/ubuntu 10.04 dual boot running on my system. I did the usual of installing 7 first, then ubuntu and using it as the default boot option. I now want to get rid of win 7 and expand the ubuntu installation into the free space. My current hdd structure is in the attachment. If I just boot a live cd and gparted to remove the win 7 partitions and expand the ubuntu installation into the free space, will that work or will it have a massive panic? how to I get grub to silently boot after without offering me any boot options?
View 7 Replies
View Related
Sep 25, 2010
I have recently installed Ubuntu 10.04 on a Compaq Presario V3000.
To prepare the install, I freed about 15 GB of space, booted from an USB. I chose "use largest continous free space" when it got to that point and then proceeded with the rest.
Now when I choose vista it will not load properly, here's what happens:
1.Windows says loading windows files.
2.After a while, I have to choose a language.
3.Windows looks for operating systems to repair.
If I choose not to, it will take me to a menu where I can choose to fix boot problems, command line, etc...
Linux is running very well, vista is the problem here, I have a recovery disk*, but I wanted to ask you guys if that is the correct move. I really need to keep windows to run some windows only apps.
*This disk was burnt on another computer, an HP from a friend who has the same vista edition. Will this work? This computer's burner is broken..
This is actually something for my gf, she has an account on my computer(only ubuntu on it) and uses it often (Mendley, Zotero, and sciency things in general). She loved it and asked me to install a dual boot with her win system. She use SPSS for whatever kind of statistical analysis it does and she likes ms office better then open office, and I would like to leave her with the choice....
View 9 Replies
View Related
Oct 19, 2010
I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies
View Related
Mar 23, 2011
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
[code]....
View 8 Replies
View Related
Apr 26, 2011
One thing I notice and hope someone here can steer me in the right direction. When I start up my computer I have the list of options to choose from, if I choose to boot into Win 7 I am the presented again with another boot menu from windows. I would like to remove the Windows boot loader.
View 4 Replies
View Related
Sep 11, 2010
Is it possible to have the Windows bootloader point to Windows 7 and a Linux partition instead of using GRUB to point to Windows 7 and Linux?
View 2 Replies
View Related
May 14, 2010
I just got a Toshiba Mini NB305-310 and tried to install Ubuntu 10.04 on it using the .iso file on a flash drive. When I try to boot into Windows XP, the loading screen comes up for a second, flashes blue, then restarts the computer. I'm able to boot up in Ubuntu, but it takes a LONG time with the screen black before it goes to the Ubuntu loading screen. I saw in an earlier post that it's helpful to post the output of the Boot Info Script, so I've posted it below. I'm new to the forums, so if I'm doing anything wrong, please let me know:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
[code].....
View 9 Replies
View Related
Oct 28, 2010
I am trying to run a dual boot system with Windows 7 and an Ubuntu 9.10 installation from a live CD. I am running this on a Dell Inspiron M5030. Both operating systems have installed fine however whenever I run Windows the computer subsequently fails to run Grub upon rebooting and gives the following error message:
Grub loading
the symbol 'ob_bioslgrub?+E?U? Not found
Aborted press any key to exit
The unrecognised symbols are different each time. I have also had (' ') and ('ee*??S ') and ('un'). I cured this initially by reinstalling Ubuntu but after looking at the support documentation have now found that I can cure it temporarily by simply reinstalling Grub using the command:
sudo grub-setup -d /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub -m /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub/device.map /dev/sda
I can then run Ubuntu fine, however upon running Windows again the problem reoccurs and Grub will not run.
View 9 Replies
View Related
Apr 20, 2010
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
View 9 Replies
View Related
