I have a dual-boot Fedora / WinXP laptop, and the F13 upgrade failed soon after the 'upgrade' option was selected in the menu.The problem was that the installer could not recognise the ...ntfs-3g.. entry for WinXP in /etc/fstab.The fix is simply to change this entry to ...ntfs... and the install will then proceed OK.
View 9 RepliesI just attempted to install ubuntu for the 4th and 5th time and have yet again had a fail. This time it actually completed the installation, which is a first. however upon reboot it takes me directly to Vista - I don't see grub or a o/s selection choice.
View 9 Replies View RelatedI had a machine that dual-booted Windows 7 and Ubuntu 9.10. This past weekend I thought I'd upgrade to 10.04. I obviously selected the utterly wrong set of selections when prompted during installation to pick partitions for GRUB2 to manage. I am sorry I can't say what I picked, but I can tell you the results:
* Ubuntu 10.04 boots fine
* Windows 7 just blinks with a flashing cursor in the upper left
* I do have my Win 7 install disc and used the "repair" option and the command line commands, but the repair disc does NOT see any valid Windows partitions... no C:, nothing. I can't run the various repair options I've seen online because there's nothing to run it on.
* I can see the Windows partition when booted under Ubuntu... all the data is still apparently there.
* I've seen various threads about restarting with the LiveCD and re-running GRUB2 but am not sure I've seen a definitive page on how to re-run GRUB2 and what to select once I've done so.
I would be happy to get both Win 7 and Ubuntu bootable, but barring that, I would like to get Win 7 back with everything intact. If the easiest path forward is to reformat and reinstall Win 7, that's less fine but doable -- I've backed up what I can via Ubuntu to an external drive.
I installed 10.04 dual boot with XP.
I used advanced partition scheme and added partitions for /, /home, /swap, and and NTFS partition mounted at /home/username/Desktop/DATA.
Unfortunately the NTFS partition was created as a "Linux (0x83)" partition and therefore is not recognized inside Windows. I did not even realize there was such a thing as Linux only (Non MS) NTFS partition. I don't even recall the details when selecting the partition type.
I tried using disk Ubuntu utility to change the type to "HPFS/NTFS (0x07)". While mounted I get error after long delay (hang) high CPU usage error "Message did not receive a reply (timeout by message bus)"
If I try the same change with DU after unmounting the volume, I get the same error.
I'm in the process of moving/backingup all data on the volume. I'll most likely reformat. Question is, shall I format with Gparted or within Windows Disk Manager? I seem to recall some odd permission problems in the past with mounted NTFS volumes.
I am attempting to install Maverick on an older pc. It has (2) mirrored 153 GB SATA drives. I set aside 33GB for a linux partition, by shrinking the partition in Vista.
Choosing to "Install along side windows" is not an available option. I can only choose use who disk, or use empty area. I choose use the empty area, and the Ubiquity installer gets hung up when attempting to format the empty space as EXT4. When I scroll up on the output I notice some error messages referencing NTFS. When I use Gparted it shows a possible problem.
Quote:
Warning:
The device /dev/sda1 doesn't exist
ntfsresize v2.0.0 (libntfs 10:0:0
ERROR(2):Failed to check 'dev/sda1' mount state: No such
file or directory
Probably /etc/mtab is missing. It's too risky to continue. You
might try an another Linux ditro.
Unable to read the contents of this file system!Because of this some operations may be unavailable.
The following list of software packages is required for ntfs file system support: ntfsprogs.
I ran chkdsk /r on the Vista partiton, in case there was a problem there. The issue still persists.
I already had Windows 7 installed and decided to try out Ubuntu--just to, you know, mess around with stuff. During the partitioning part of the installation, I didn't pay attention as to how much space/volume I would shrink Windows down to, so I just went ahead and pressed forward with the default amount already on there (all of of the space went to Ubuntu, I'm thinking).
Now whenever I turn on my computer, I get a grub menu. On the list is Linux xxxx, Linux etc (blah blah blah), and then Windows 7 loader. It doesn't work, and suggests that I put in the Windows installation disc.
This is what my partitions look like on Gparted:
I have the installation disc. Somewhere.
I'd like to keep the dual boot on Ubuntu and Windows 7 if that's possible.But since Ubuntu is already working, if it's easier to just delete Windows 7, I'd like to know how to do that, too.
Here's the breakdown of my Hard Drive:
Partition 1: Windows 7 - NTFS
Partition 2: Ubuntu 10.10 - Ext4
Partition 3: Data - NTFS
Partition 4: Windows Recovery - meh...
Basically, I have it so that I have one large NTFS partition (Data) for sharing files between Ubuntu and Windows. It works very well. I keep all my Documents, Music, Pictures and Videos on "Data" and then sym-link those folders to my home folder on Ubuntu. Unfortunately, I'm afraid to bootup Windows. Sometimes when I boot Windows, files that I made or edited in Ubuntu get lost, unindexed or corrupt. It happens very frequently with image files (.jpeg, .png, etc.) but also happens with PDFs and folders. This means that not only do these files become unusable, but I also can't delete them. Even using $ rm -rf my_file returns a "Cannot delete my_file. It is not a file or directory."
The only way to get rid of these files is to perform a CHKDSK on Data when I boot Windows. CHKDSK always finds a shed-load of files that have gone haywire. I'm usually greeted by an seemingly indefinite list of "Removing index entry xyz from $afxyz" and other scary looking actions being taken out on my files.I keep backups of my files on an external HDD and a remote server, but it's no use when I'm backing up corrupt files.
i have windows xp with ntfs partitions on my laptop i want to install centos on it will i be able to dual boot centos with windows xp on the ntfs partition
View 2 Replies View RelatedI just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.
View 12 Replies View RelatedI have a dual boot of Ubuntu 10.04 and Windows 7. I have 2 hard drives on the system, a 500GB and a 1TB drive.
Code:
root@akashi-desktop:~# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x3e67485a .....
Since the drive (sdb2) was already mounted I was able to see "file" show up on the NTFS drive (sdb2) with the last command above. After I rebooted onto Windows 7, I found my F: drive (sdb2) showing up as a RAW filesystem. Windows 7 asks to reformat and I press NO as I have a lot of files on that drive. I rebooted onto Ubuntu again, during boot it says cannot mount to /dev/sdb2 and to press "S" to skip. I pressed "S" and saw sdb2 not mounted. I tried this command:
Code:
root@akashi-desktop:~# mount -t ntfs /dev/sdb2 /media/sdb2
NTFS signature is missing.
Failed to mount '/dev/sdb2': Invalid argument
The device '/dev/sdb2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
How to fix this drive without formatting it! fdisk shows the filesytem as NTFS so it must still be fixable I hope.
I have a dual boot system with XP and CentOS 5.3, I want to access the NTFS partitions of XP from CentOS but how?
View 1 Replies View RelatedI currently have XP installed on a NetBook (Samsung NC10), and would like to run Fedora on it. I'm currently looking at putting Fedora onto a flash memory card to test it works OK on the hardware, before installing it to the hard disk. The problem I've got is that the boot sector is occupied by WDE software (TrueCrypt). Will this pose a problem for dual-booting XP with Fedora, or will GRUB move the boot loader in the usual way?
View 2 Replies View RelatedWhen i work in Ubuntu on a dual boot system with a shared NTFS data-partition where Windows is hibernated, and then reboot and continue working in Windows from the hibernated sesion, strange things happen. Files disappear, files that i worked on suddenly have the content of another file.
View 5 Replies View RelatedI just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
When upgrading F12 to F13 I had a fatal error when I selected to update grub so I opted to do a fresh install of grub and the upgrade proceeded without any further problems. When I went to boot the system (dual-boot with Win 7) grub gave me error 17 "cannot mount selected partition". So I booted into rescue from the install disk thinking that maybe reinstalling grub might help, but when I ran "grub-install /dev/sda" I got the message that "/dev/sda does not have any corresponding BIOS drive" (I have Windows on SATA 1 sda and Fedora on SATA 2 sdb). I exited rescue mode rebooted entered BIOS and swapped the drive order and restarted. Success!... Well almost. The progress bar goes all the way across the screen to the point the login screen should come up then it hangs...
View 8 Replies View RelatedI've been wrestling with this for the last couple of days - I can't dual boot XP and F10.
[code]...
I did notice when installing F10 that it remapped my drives, making the WIndows and therefore boot drive /dev/sdb and the Linux Drive /dev/sda. I know this requires changing some of the drive designations (hd0,0 etc) but I've done it twice and ended up only being able to boot into Windows.
I need to remove my dual boot of WinXP & F9 to replace them with F10. Should I format the disk before installing F10? I'm still a beginner in Fedora. & How is the fedora 10? do you recommend replacing it compared to F9?
View 14 Replies View RelatedI have two hard drives in my PC, ubuntu 8.10 on the first. After reading good reviews about Fedora 10, i decided to give it a try. I installed Fedora 10 in my second hard drive and the distro is great. But my problem is that now I cannot get into the Ubuntu install. I changed the /boot/grub/menu.lst file as recommended by several posts, but no progress. my menu.lst file below. if I have got it wrong or if I need to add anything.
HTML Code:
I'm looking to dive right into this whole GNU/Linux thing, and am looking to try out as many distros as I can. I've already installed Ubuntu Jaunty Jackalope, and want to dual boot fedora 10 with it. How hard would this be for a total linux n00b like myself?
View 14 Replies View RelatedI have a PC with two 40 Gb hard drives. Vista is currently installed on drive 0. Nothing is installed on drive 1. If I switch cables to the drives, Vista will be installed on drive 1. Nothing will be installed on drive 0. If I then install Fedora 10 on drive 0, will it automatically detect Vista on drive 1 and allow me the option of using Grub or something else to boot it? I want to avoid having Vista overwrite my MBR, but I don't want to piss my wife off because she can't access windows for two weeks while I figure out how to customize Grub or install something else. If I need to customize Grub, (or some other boot loader), I would need step by step instructions. Is there a book or online tutorial?
View 4 Replies View Relatedhow to install fedora on a hdd that already has xp sp2 and setup a dual boot.
View 2 Replies View RelatedI already have windows XP SP2. i want to install fedora 10. how can i install it as a dual boot option. I current have
C: drive 40GB -- windows XP NTFS
D: drive 20GB NTFS
E: drive 20GB NTFS
tell me the steps to install fedora 10 as dual boot option.
I've successfully used Fedora 11 from a USB stick as a live cd iso. Everything seems to work on my netbook so i want to try installing it but I need it to be a dual boot with windows. How can i do this? And will it definitely work or are there issues (I've read that F11 has problems installing if not taking over the entire HD)?
View 3 Replies View RelatedI need to create a dual boot system consisting of 32 bit Fedora 9 and 64 bit Fedora 9, but I'm unable to go about it. How exactly should I do it?
View 5 Replies View RelatedI have managed to reduce the default LVM F8 install to make room for F10... See Bare metal backup:
[URL]
And shrink the partition:
[URL]
I now have about 50G free on a 80G drive. The F8 system has a small /boot and an LVM partition that includes swap. What I want to do is install F10 WITHOUT LVM on the free space. Access to the F8 LVM drive would be a plus but not complete necessary. I just want to keep the F8 system as is until I get set up with everything under f10, which may be a bit. I am not sure what to enter for mount points for the custom drive layout. I need a small swap partition (I don't want to use F8 swap because it will be going away in the future, for example when I install F12 and have dual boot F10/F12 system. What should I have as primary partitions and which as secondary?
How do I set up the boot? Grub?
Only Fedora 11 is on the boot menu after replacing Fedora 10 by new install on a 10+WinMe dual boot computer. The WinME partition is available after booting Fedora 11. How do I add WinME as a boot choice?
[Code].....
I would like to try out fedora 12 using dual boot method. i currently have ubuntu karmic installed with grub2 and ext4 partitions and would like to dual boot with fedora 12. if i just install fedora 12 will it automatically pick up ubuntu karmic as welland add it to grub. will there be any problems since fedora uses grub legacy and ubuntu uses grub2?
View 1 Replies View RelatedI want to setup a machine that can dual boot both Fedora and Ubuntu.
The machine already has F11 installed and the bootloader is in /dev/md0 partition.
There are mounts:
I added another drive pair because I want Ubuntu on its own LVM partition on separate drive array.
So how do I add Ubuntu to this now?
fresh installed F12 on secondary drive, XP on primary drive. Then swapped drives making F12 primary. I boot into F12 fine, I also get menu to boot Other but when I choose this option instead of going into XP I get error 22 no partition? I can swap the drives around & boot into windows fine. I know I must not be pointing or having F12 pointing to the correct partition for XP.
View 14 Replies View RelatedI am a relative newbie to Fedora 12, altho did start with OpenSuse. I installed XP first with the games that couldn't run via wine. Then I installed Fedora but I must've done something wrong as although Fedora runs fine with a few personal tweaks with everything I want I can't access XP as it is no longer an option in the boot up. What do you suggest I do. I have a system rescue cd ready but don't know how to access the boot or change it.
[Code]...