Ubuntu :: Which Version Is Easiest To Get VMware Going?
May 25, 2010Which version is easiest to get VMware going? Lucid, Karmic, or something else?
View 3 RepliesWhich version is easiest to get VMware going? Lucid, Karmic, or something else?
View 3 RepliesHave done a bit of Googling around this but got totally swamped so will try here. Basically we are running a CentOS server which hosts a number of virtual hosts under Apache. Recently I needed to set up a development environment for another site using Ubuntu and have this running and accessible on the LAN from a VMWare image. I'm using bridged networking so the VMWare machine has its own IP on the LAN subnet.
I've set up a DNS to point to the external IP of the physical host but can't figure out how to route traffic requested on this domain to the VMWare host. I've basically tried two approaches (configuring a proxy web server and reverse proxy in an httpd.conf file and mucking around with iptables forwarding rules but without success.
Ideally I'd like somesite.somewhere.com to point to the VMWare IP but I could live with a custom port on the end if thats whats required.
To throw further complication into the mix I need reliable communication between the VMWare machine and external mail relay servers in order to debug any issues with mail bouncebacks, embargos etc.
Any idea what's the easiest way to accomplish this?
I upgraded Ubuntu version 8 to version 9.10 and VMware dosen't work no more. After I launch WVware Workstation a message appears: "Before you can run VMware Workstation, several modules must be compiled and loaded into running kernel." I select install (yes), and after that it's giving me error: "Unable to build kernel module. See log file /tmp/vmware-root/setup-30979.log for details."
View 7 Replies View RelatedWe have installed vmware tools (open-vm-tools) on Ubuntu Hardy which is comaptible with the ESX 4.1. The packages are installed adding a repo.
deb [URL] main restricted
The Ubuntu VM is presently running on ESX 3.5, we will soon upgrade it to 4.0. How can I confirm which version of vmware-tools is running on the Guest Ubuntu VM? When we upgrade to new ESX version, the vmtools must be intact.
I want to install Ubuntu but not as Dual-Boot (Other OS is Windows XP x64 edition).
Does Wubi perform significantly better than an Ubuntu version installed on VMWare or VirtualBox?
My computer has:Intel Core2 Quad Q8200 @ 2.33GHz. 4GB RAM. An almost empty 450GB HD (defragmented)
I've installed the latest testing version, which has 2.6.32 kernel perfect for me. I was very amazed when check system monitor and saw it runs with 90MB RAM, meanwhile my ubuntu desktop takes only 400, and the pocket version of ubuntu on vmware has 180MB RAM.
The questions is: Debian runs on vmware 7. Could the amount of RAM change when switching to a normal environment? Or I have to test and see what is happening..What problems could occur when using a testing version?
I have noticed kernel.org with kernel releases on the mainline.Example: 2.6.36-rc1 is currently on the mainline. What does it mean? Does it mean that feature changes been freezed.Does it mean "2.6.36-rc1 Released". I have job to verify vmware drivers to test the version information, Can I test it now through compiling for vmware drivers now. Lots of Git activity goes on after kernel comes on mainline. Does it mean our vmware drivers can only be tested after kernel if finally announced
View 4 Replies View RelatedMy boss is asking me if there is any way to run a full version of Ubuntu from a flash drive without installing virtualbox/vmware on a windows host. I've been searching pendrivelinux.com and really haven't found anything. Can someone point me in the right direction?
View 6 Replies View RelatedI have installed OpenSUSE 11.3 64 bit and want to install VMWare workstation 7.1. I have run the install script for VMWare without any issues. When I start the VMWare Workstation I get a window saying this: Before you can run VMWare, several modules must be compiled and loaded into the running kernel. Kernel Headers 2.6.34-12-desktop Kernel headers for version 2.6.34-12-desktop were not found.
View 9 Replies View RelatedI am looking for a version of vmware that manages 2 severs at the same time and that mirrors them such that if one goes down we can still work on the second and of course it also works as a backup. Also, must work on a ubuntu server I have looked but there are so many version that I don't know which one is the best.
View 1 Replies View RelatedI have installed the latest version of Ubuntu Linux (11.04) into latest VMware workstation (7.1.4 build-385536). I have tried to install the VMware tools ISO that came with VMware workstation but It didn't work and the installation seemed real sloppy anyways.
I installed the open VMware tools from synaptic within the guest linux and restarted, everything seemed to have been installed just fine but VMware Workstation doesn't detect it. I'm not sure if the tools are outdated, silent errors happened, or if any manual post installation steps need to be taken.
getting any form of VMware tools to run in Linux and detected by VMware Workstation.
I have no idea how to do that >_> I have ubuntu (and Windows 7) dual booting from a partition.
View 9 Replies View RelatedIs it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies View RelatedI want to install debian on vmware workstation 7.1.4 but there's a problem! when I try to install vmware tools or open-vm, it can't complete compile modules of vmware. It is a big problem... It seem problem of kernel version after 2.6.37... But I can't find solution. logs.... Before you can compile modules, you need to have the following installed...
[Code].....
I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
I'm trying to access the VMWare console from firefox using the VMWare plugin. The problem is that it doesn't work on Firefox version 3.6.8. So how can I access the console?
View 2 Replies View RelatedI am running an up to date Debian Lenny system with vmware 1.08 server installed.
When I run vmware, it appears to start normally. However, when I try to open a previously created image (from a different machine), everything is fine until I hit browse, which causes a screen to pop up that syas "The folder contents could not be displayed VFS error: Invlalid paramteres." and the following shows up on the command line:
Code:
I finally have a properly workng Vista Karmic dual boot. I don't remember how I setup the Ubuntu partition(did it in the advanced option), but my Vista file system is not listed in Places. I can mount the Vista partition through terminal, which tells me the two are still communicating. I would like to be able to view the file system from a window for future use with WINE.I am also looking for a file search engine for jdownloader similar to xdccreport.com for irc.What is the easiest to use most integrated derivative of Ubuntu?(From the standing point of a life long windows user?)
View 1 Replies View RelatedI simply cannot get filezilla to work.It wont even pass its own test, yet on a friends mac, 'fetch' works fine.I need an FTP program for my Linux machine (OpenSuse KDE).Could someone please recommend one that I can get with YAST ?I just need to access a remote host to upload some files for a site.
View 9 Replies View RelatedSo what is the easiest way to install Ubuntu with win7 also on the computer?I'm asking because last time I ran Ubuntu it was Wubi'd into XP and then it broke, breaking XP's bootkernel and then keeping me from booting into anything...
View 5 Replies View RelatedI'm on netbook remix and I want to wipe the entire thing clean. What is the easiest way to do this?
View 4 Replies View RelatedI'm trying to convert my GF's brother to Linux, but he requires IE for a school website to work.
I've tried ies4linux, which doesn't work because it is abandonware as I later learned.
I found this and ran code...
UI figured this would be the place to ask this question. I would like to download all the repositories to my PC for those crazy times when I don't have internet and need to install a program. I guess I would be making my PC a LAN Repository. What is the easiest/fastest way to get all the packages?
View 1 Replies View RelatedI'm in the middle of moving my lab to a new server in the middle of the school year.. and need to copy all the user accounts to the new box, hopefully with all the student's passwords and contents of their folders intact.And since we are using the system daily, I need to do it all in an hour or 2.I'm thinking I can just
1. diff /etc/passwd and /etc/shadow from the old the new
2. copy all the student folders to new /home
3. write a script to set the permissions on all the new /home folders to match the user names.
It seems easy and safe so long as I back up the 2 existing files..Any reason not to try? Or is there an easier way?
I currently have my home folder encrypted with 128 bit encfs but i have the back up of that 'in the clear' on my back up hard drive. I am not that great with complicated instructions and especially the terminal so what if any is the easiest program to encrypt with?
View 9 Replies View RelatedWith Windows XP, I just right clicked a folder/directory and pressed FIND then I could search for whatever file/folder name i wanted to. I could even do custom searches based on the size, modification date etc.How do you do this on Ubuntu? There doesnt seem to be a way to easily do it like this. So far i found PLACES -> SEARCH FOR FILES but that means I have to go into the directory i want. Where as I would much rather be browsing through directories and THEN want to quickly search in a particular folder. The SEARCH FOR FILES method in PLACES just wastes more time.
View 3 Replies View RelatedI need to install ubuntu 10.10 into 30 computers (using windows XP). I don't want to take each computer, format it and install the new operation system.(That's going to take too much time). Some documentations about the way that I can accelerate this process.
View 5 Replies View RelatedIs this the best & easiest way to create a bootable usb drive?Live USB stick - openSUSE.I should follow the Linux instructions and then a create a partition with remaining space on the usb drive.I'm looking to do this when 11.3 comes out. My main focus is to create bootable usb drives to stop wasting cd/dvd's that lay around and pile up; right now we have no recycling center for old cd/dvds without shipping them out by the cost of the consumer. Learning to create a bootable usb opensuse will reduce my waste of old distributions. I ran the Ubuntu usb installer, which graphically does the work for you, so the opensuse looks a little more like work, but manageable for the simple user?
View 1 Replies View RelatedFor example, how to do this:
$ job1 &
$ p1=$LASTPID
$ job2 &
$ p2=$LASTPID
$ wait $p1 $p2