I've got VirtualBox on my Ubuntu computer, with guest additions and a virtual Windows XP. Being a bit of an idiot, I allocated just 6GB for the C: drive, as a result of which it keeps filling up.I have since created more drives - Local Disk (E: ) and Disk 2 (F: ) which each have 50GB. What I want to do is make C: bigger, possibly by swapping it with E:, so C: will have 50GB and E: will have the miserly 6GB.
View 9 RepliesI am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies View RelatedI have Fedora 14 installed on my main internal drive. I have one Fedora 14 and one Fedora 15 installed on two separate USB drives.When I boot into any of these drives, I can't access any of the other hard drives from the other drivesll I can, but just the boot partitions.Is there any way of mounting the other partitions so I can access the information?---------- Post added at 12:42 PM ---------- Previous post was at 09:34 AM ----------I guess even an explanation on why I can't view them would be good too.
View 7 Replies View RelatedI have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies View RelatedI have 64bit Maverick installed and am using VirtualBox 3.2.12 to run 32bit XP Home. In the devices menu, nearly all the USB devices are grayed out. The printer is the only exception. It is working fine. If I plug in a flash drive (memory stick or whatever one wants to call it), Ubuntu sees it and it appears in the menu but is grayed out. When I remove the device, it disappears from the menu. This tells me that VirtualBox sees them. How do I get to access these USB devices? What have I omitted to do?
View 7 Replies View RelatedI am running Virtualbox with Win XP on Ubuntu 10.04, Everything is mostly ok, but I find two problems. I cannot seem to find a way to access my second (physical) harddrive as well as DVD writer. I have tried to add it to shared folders in Virtual box, but no go. I can , however, access my USB drives ok, after I found out about the Vbox user permissions. But what I do notice is that it seems Ubuntu unmounts the USB drive as soon as Vbox "mounts" it. Is there no way to have these drives mounted simultaneously on both platforms ?
View 4 Replies View RelatedUpgraded. VBox (Win7 - 64bit) runs well, but does not see attached drives. Removed the drives, and attempting to re-attach, usually results in an immediate Windows 7 crash. Even when attached (lucky) - the drives do not re-attach after a VBox reboot. Is there some easy way to downgrade to 10.10??
View 2 Replies View RelatedI have a problem with my virtualbox 3.2 (obviusly puel version). I use Debian squeeze and I found various things on the net. The vbox wiki says that in modern distros you only need to be part of the vboxusers group to use the usb drives. INfact, after adding myself to the group, my usb drives have become visible in virtualbox. However, when I click them (I have already configured the vbox usb filters), nothing happens: the usb is unmounted in linux and vbox says that the usb is captured, but in my xp sp1 nothing happens.
Does anyone of you know the correct procedure to make the usb work in debian squeeze?
I currently have VirtualBox installed on my Ubuntu 9.10 Desktop. I have windows xp as a guest os and it has network shares on it. My question is, is there a way for another computer to access those network drives on the guest os in virtualbox? I don't want to search for hours on end on google, a simple no would be fine - however if it is possible let me know because when I am in windows on another computer that has windows as a host os it sees it in the windows network folder but it says "....network location not found" or something similar but it still shows a pc picture of the virtual os of the virtual box program running in ubuntu.
View 1 Replies View RelatedI am concerned about the LiveCD touching my HDD at all. Is this a factor, such as using HDD space for a swap file? I thought the whole thing ran off my RAM. Anyway here's my specs:
MacBook Pro 500GB:
HFS+ Partition w/Snow Leaopard ~400GB
NTFS Parition with WIndows 7 ~100GB
EFI Partition ~200MB
1) Does this mean I have a "swap file" on there I don't know about? I assume both WIndows and OSX use virtual memory to manage RAM when running in their respective operating systems but does that mean Ubuntu LiveCD will use one of my winows or OSX partition's "swap file"?
2) Or is there an invisiable partition created for LiveCD to use on some unallocated space on my HDD (I don't think there's any but idunno)?
3) How can I be sure the LiveCD is not writing ANY data to the HDD? I don't believe I have ever explicitly created a swap file in either OSX or windows.
As my harddisks are completely full I want to swap a 1,5TB drive with a 2TB drive to give me some breathing space. The 1,5TB is part of a LVM spanned volume. My simple question, how do I move all data from the one drive to the other drive without ruining my spanned volume?
View 3 Replies View RelatedI got a new laptop, a Dell D400. I want to swap my hard-drive from my old laptop into the new one, and did so... but then got an error stating that my CPU didn't support PAE.
As far as I was aware I hadn't actually installed a kernel with PAE enabled [as I always pick a real-time kernel for audio work]: but then read that lots of the newer distibutions are enabling PAE by default [which is what's caused the problem].
Is there an easy way of disabling PAE in the existing kernel? Or would it be easier to downgrade to another version of OpenSUSE? I'm on 11.2.
I have a Centos 5.5 system with 2* 250 gig sata physical drives, sda and sdb. Each drive has a linux raid boot partition and a Linux raid LVM partition. Both pairs of partitions are set up with raid 1 mirroring. I want to add more data capacity - and I propose to add a second pair of physical drives - this time 1.5 terabyte drives presumably sdc and sdd. I assume I can just plug in the new hardware - reboot the system and set up the new partitions, raid arrays and LVMs on the live system. My first question:
1) Is there any danger - that adding these drives to arbitrary sata ports on the motherboard will cause the re-enumeration of the "sdx" series in such a way that the system will get confused about where to find the existing raid components and/or the boot or root file-systems? If anyone can point me to a tutorial on how the enumeration of the "sdx" sequence works and how the system finds the raid arrays and root file-system at boot time
2) I intend to use the majority of the new raid array as an LVM "Data Volume" to isolate "data" from "system" files for backup and maintenance purposes. Is there any merit in creating "alternate" boot partitions and "alternate" root file-systems on the new drives so that the system can be backed up there periodically? The intent here is to boot from the newer partition in the event of a corruption or other failure of the current boot or root file-system. If this is a good idea - how would the system know where to find the root file-system if the original one gets corrupted. i.e. At boot time - how does the system know what root file-system to use and where to find it?
3) If I create new LVM /raid partitions on the new drives - should the new LVM be part of the same "volgroup" - or would it be better to make it a separate "volgroup"? What are the issues to consider in making that decision?
i have 2 hard drives showing up on my desk top and when i try to unmount them i get an error
Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount /dev/sdc1 from /media/new movie storage
and
Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount /dev/sdb1 from /media/STUFF
when i try to unmount the other one. now one problem i see is that the labels are wrong the error for /media/stuff came up when i tried to unmount /media/new movie storage, and and the other way around for /media/stuff. also new movie storage is labeled as safe every ware else including inside windows
Earlier I had two physical hard drives in my computer, one with Windows and one with Ubuntu. Now I have a new computer and have installed these hard drives in it. I run Windows 7, and I can find the Windows disk, but not the Ubuntu disk. This doesn't surprise me, as Ubuntu is another filesystem, however, earlier I could format it with a partition manager, but now I didn't even find it with that!
View 9 Replies View RelatedI have installed two hard drives. One is a Sata drive and the other an IDE drive.They are both functional drives. On boot up only the Sata drive shows up. How do I get both drives to boot up together please.The Sata drive has Ubuntu on it and the IDE drive has Fedora on it' I would like to access all of them.
View 3 Replies View RelatedI'm looking for a way to set up a backup with two 2TB hard drives. What I want to do is basically mirror two drives. What ever I copy to the one drive I want it to be "cloned" with the other drive.
Is there any software that could help me with this? Does anyone know of a better to do something like this?
I have a nice computer i have been dual booting between either ubuntu or win7. i am wanting to remove win7 and install winxp sp3, so i can use media center with my xbox. i preferred that win7 work, but since my copy is not genuine, its authenticity is believed to be the culprit in connection errors with the xbox. i have not been able to find a linux alternative, which i doubt even exists due to the proprietary nature of the xbox.
So, my question is how do i reformat the win7 hard drive? are there issues i need to worry about that may reformat both hard drives on accident? and when the hard drive is formatted, will i be prompted to choose which hard drive to install win xp on?
My computer has 2 40GB hard drives (yes, it's really old). One of these hard drives has Ubuntu installed on it, and I would like to use the second hard drive as a data storage device that is usable by anyone who just wants a random place to drop random stuff. How do I do this?
View 2 Replies View RelatedI am trying to install windows 7 over Ubuntu, however when i run the install disk it tells me that my hard drive is not formatted in the correct format. I have then loaded up Ubuntu, tried to re-format using Gparted and it won't let me re-format my hard drive when I right click on it. The only option I get when right-clicking is to unmount the drive.
View 7 Replies View RelatedI have ubuntu 11.04 installed on a 80gb hard drive and everything was running fine. I then installed a second drive (1gb) for storage. It worked fine after a reboot but now it won't boot. I'm pretty sure it's just confused as to which drive is the boot drive. I'm not sure as to how to fix it in GRUB2.
View 2 Replies View RelatedI want to make a RAID5 array with 4 2TB hard drives. One of the drives is full of data so I will need to start with a 3 disks and then once I copy the data from the 4th onto the array, I will then add the 4th drive. This will be my first experience with RAID. I've spent a few hours searching for info but most of what I have found is a bit over my head.
View 9 Replies View RelatedI have a machine that is dual booted with win vista. It has 3 HD's. I created the partitions for the non-bootable drives in windows, ages ago. Prior versions of ubuntu would detect the drives, when I clicked on them in nautilus, I was prompted for my password, then the drives were mounted for the rest of the session. any idea how to mount these drives properly? The documentation linked to above describes ext3 and fat32 file systems (I tried both)
View 7 Replies View RelatedGoing to be setting up a local home server ("headless") for the following:* General file sharing for home network -- a portion of this will be for movies which are accessed via Popcorn-Hour and a second PC hooked to another TV* MySQL storage for home network (bills, misc info, bookmarks, code snippets, etc.)* PHP Server for php scripts i write* SVN* misc Databases for PHP dBase testing (SQLite and Postgre) * Virtualbox* backing up stuffI have a bunch of hard-drives of different sizes, buffer size and access speeds.
Hardware* m/b supermicro X7SBL-LN2* Intel Xeon X3360 Yorkfield 2.83GHz 12MB L2 Cache LGA 775 95W Quad-Core Processor* (2) (8GB in total) Crucial 4GB (2 x 2GB) 240-Pin DDR2 SDRAM ECC Unbuffered DDR2 667 (PC2 5300) Dual Channel Kit Server Memory Model CT2KIT25672AA667
* (known hdd) Western Digital Caviar Green WD10EADS 1TB 32MB Cache SATA 3.0Gb/s3.5"Internal Hard Drive -Bare Drive
What would be the best way to set this up ?OS installed on fast hdd ?Virtualbox on fast hdd ?Movie storage on fast hdd's (mirror raided) ?As for raid, i plan on taking two (1TB) hdd's and mirror them for the movies and two more (smaller) mirrored for backup storage.Im pretty sure i would want the Movies stored on there own hard-drive (faster hdd with more buffer) so not to cause and "lag" incase the server is being used/access at the same time for another use (MySQL access or what ever).Currently the server machine is set-up using VMware which is where the current Ubuntu-server is installed to/on, but now i would like to have Ubuntu as the base and use Virtualbox as means to virtual hosting instead of VMware.
I have been going crazy trying to get Ubuntu 10 installed and working on my G3 B&W. When I boot into the live CD, hit Control-Option-F2 to get into a terminal, then do Fdisk -l, it only shows my CD-ROM. I got 9.04 to install, then updated to 9.1, then to 10, but when I reboot, I get the gave up waiting for root error. Tried typing exit, and changing the wait time to 90. I've spent a lot of time on this, and learned a lot. Anyone no how to get past this?
View 2 Replies View RelatedI currently use Ubuntu Lucid, and I'm curious if there is a program that I can install and run through it which will defragment an external USB hard drive.
My 500GB hard drive is used a lot, and I often add/remove stuff on and off of it, and I'm sure it's slowly starting to get a little fragmented with the amount of deletion and addition I do on it.
Does anybody know of a way to check and potentially defragment just it through linux? Or am I gonna have to just find a windows computer and do it there?
FYI, I don't care to nor know I really don't need to defragment my Ext4 drive to which Ubuntu's installed, its' just the external I am curious about.
Having a little problem with 10.04 installation. I have two hard drives installed on my PC. One that had Hardy Heron and one data. When the install program launches from a CD boot, it fails and drops me to a live session to check out the problem. I can see both drives and mount them but if I then launch the installer, it does not give either as an option for installation.
View 4 Replies View RelatedI have installed Ubuntu 10.4 worked fine, and Clonezilla (including configuring it) -- (though my /etc/networking/interfaces seems to give an error in line 2 I have the following questions)I have installed a second Hd (250Gb) ... and I have formatted it with gparted so it mounts fine and I am able to see it ... is there any way to make it a permanent mount and have Clonezilla use it to store images on it? ... The first HD was formatted LMV during the Ubuntu installation.
View 2 Replies View RelatedWhen i try to install ubuntu 10.04 on my desktop i get through the first 3 steps which are Language, Region, and Keyboard. when i get to Prepare partitions, there is nothing there (same problem with 9.10). I followed the steps of another thread about removing the raid settings and I am sure i did that correctly but it did not work, when i try to find my drives in terminal they can not even be found.
Both of my drives are SATA, one is 250gb, other is 500gb. They are both recognized by other operating systems. I have switched the SATA headers that they are plugged into. I really am just not sure what else to do here. Im not totally stupid at linux, ive been using it for a few years and i have taken two classes for linux in the past year. I really feel dumb for not being able to figure this out :/
I have this server board by supermicro: H8QM3-2 I would like to know if there is a sas driver for the hard drives? I want to use ubuntu 64bit but fail to find a driver for my sas hard drive.
View 2 Replies View Related