When I installed 10.10 I uninstalled gwibber, empathy and ubuntuone. Twice now in Update Manager I've subsequently found gwibber on the list of possible updates. Is there a way to tell Update Manager not to include in future some programs, which I've uninstalled and don't want?
View 4 RepliesRunning F12 and the option to ignore updates is grayed out
View 9 Replies View RelatedLibnss3-1d
xulrunner-1.9.1
xulrunner-1.9.1-gnome support
After click on install updates and entering password, a message says "Some of the packages could not be retrieved from the server(s). Do you want to continue, ignoring these packages? Yes/No.
If I answer No, this message appears:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po....10.1_i386.deb
404 Not Found [IP: 91.189.88.31 80]
If Yes, it tries to download but immediately:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po....10.1_i386.deb
404 Not Found [IP: 91.189.88.31 80]
It has always installed the updates with no problems, until these 3 updates remain in pending installation status.
I'm trying get updates from update manager and it says "the upgrade needs a total of 498M free space on disk '/'. Please free at least an additional 495M of disk space on '/'. Empty your trash and remove temporary packages of former installations using 'sudo apt-get clean'." I ran sudo apt-get clean n it did nothing.
View 9 Replies View RelatedIs there an easy way/place to get more info on the updates that the Ubuntu (9.04) Update Manager presents to you? I know you can highlight one and look below at the "Changes" and "Description". But how can you find a real explanation of what the update is? To give one exampe: There's a 5.0MB update called: openoffice.org-writer It appears to be a new version of the Writer program?? or is it just security updates?? Should I install it if I'm happy with the current Writer version? bottom line: where can I get plain talk about what these updates are?
View 9 Replies View RelatedI am relatively new to Ubuntu, so this might be an easy fix. When I try to install my updates with Update Manager I get this error message: p { margin-bottom: 0.08in; } W: Failed to fetch [URL]..Could not connect to 172.16.30.51:3128 (172.16.30.51). - connect (110: Connection timed out) W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/...tu1.3_i386.deb Unable to connect to 172.16.30.51:3128: (and it goes on like this for a while) Also, when I go to install software, I get this message: Requires installation of untrusted packages. and if I click OK, nothing happens. The software won't install. I have a feeling this is because I can't update my system.
View 5 Replies View RelatedI recently installed Ubuntu 9.10 on an old computerd lying around and have been pleasantly surprised by it.I had a small problem with firefox not connecting to the internet but I managed to fix this by disabling ipv6 in about:config.The problem I now have is that update manager fails to download updates and gives a message saying failed to fetch several files.I'm connected to the internet via a wired router
View 7 Replies View RelatedI recently upgraded to 9.04 and Update Manager stopped working. If I start Update Manager it will check for updates and display them but will not install the updates. I am prompted for a password but the updates are never downloaded and I get no error messages.
View 7 Replies View Relatedi dont want to install some updates via update manager..so i untick them while updating..but when update manager checks for updates again..dey show up again..i m tired to unticking them again and again everytym. what should i do to prevent some updates from showing up again and again in update manager ?
View 2 Replies View RelatedI can't select any of the distribution updates in the update manager. The screen shot attached shows there are 3 distribution updates available but I can't select the check box in the update manager UI to have the update installed. My system is Ubuntu 10.10 (2.6.35-24-generic).
UpdateManagerScreenshot.jpg
I particularly want to update my version of OpenShot video editor. I have version 1.1.3 installed and I can see there is now a version 1.2.2.1.
I'd like to get this app under management of the update manager. How can I do this?
I currently have Windows 7 and Ubuntu 11.04 (The beta) running on my Laptop. I want to know if it's possible to get 11.04 (Full) through the update manager? If so, how? Secondly, if I wanted to just go back to 10.10, could i install it over the current 11.04? I don't want to copy files over or anything like that, just a fresh start.
View 4 Replies View Relatedwhen I open the update manager, he lists 14 items as recomended updates and when I click on install updates appears a box with this mesage "An error occurred" and makes the following list: Code: W: Failed to fetch [URL] Size mismatch
[Code].....
Installed Macbuntu on my new installation of Ubuntu 10.10. At onset was able to run update Manager with no problem. However after a couple of days and since I did the theme to make my ubuntu look like a Mac...it doesn't want to install any updates it receives. It says another program is running but I'm not running anything other than the Update Manager. Any suggestions as to how to fix this or should I drop the theme and go back to the regular window theme that came with the version of Ubuntu 10.10 I downloaded from the main site.
View 2 Replies View RelatedHow do I disable certain updates in the update manager? I don't want to install the open office uno runtime environment because I installed the rpm packages from the open office website. This update corrupts my installation of open office and I always have to reinstall it.
View 5 Replies View RelatedI have Ubuntu 8.04 LTS right now, and after looking at my updates the computer said I needed. Some of them look like i would not need them at all. It had like over a thousand updates to do. Should I pick and choose or just run it?
View 4 Replies View RelatedI regularly check for updates via Update Manager. I have, as of today started getting errors, some updates did not upload.
View 2 Replies View RelatedMy Update Manager stopped working for last three weeks. When I press button INSTALL UPDATES in Update Manager, nothing happens just Reading packing information is executed and when it is finished nothing continues,so nothing I chosen is installed. I have tried to fix broken packages in Synaptic Manager, but no change.
View 2 Replies View RelatedI am experiencing a Hang while downloading updates using the Update Manager. I have 61 packages in order to update my system.
Every time i try to install the updates, the download hangs for a large period of time, I tried to change the server i changed the server (US) to Main Server and the problem persists!
Ubuntu 10.04 LTS
I got some updates today from Update Manager & when I booted up after instillation my computer was forced into low graphics mode. Removed & then reinstalled the FGLRX drivers from the Hardware Drivers tool, rebooted & still the ATI control panel is borked.I believe one of the updates were called fglrx-modaliases.
View 4 Replies View Relatedmy update manager has run today and returned updates for firefox. Which would be a superb, immensely handy thing - if firefox happened to be installed on my box. It isn't.Why does the update manager return updates for software that isn't installed?
View 6 Replies View RelatedI have the package "xvidcap" (Screen recorder) installed in Ubuntu, the problem I have is the version I have installed is an older version and there is a newer version avaliable, but I don't want to install the newer version as this breaks some functionality regarding screen capturing e.g. audio capturing. But each time I run Update Manager the package appears in the list to be upgraded.
Is there anyway to flag the package as do not upgrade or something to make it not appear in Update Manager or at least have it greyed out so the checkbox isn't automatically checked each time update manager is ran?
I started using ubuntu 10.04 LTS on my Dell Studio 15 laptop. Installing ubuntu has never been this easy! I used CD which used WUBIInstaller to install Ubuntu. Then I restarted my machine and selected Ubuntu from 'OS selection screen'.
I connected to my wireless broadband in few minutes and found a pop-up of 'update manager' showing 305 new updates to be download and to be installed. I installed all updates worth 370 MB and in middle got an pop-up of GRUB telling me to configure GRUB on some path. I just selected that path and clicked on FORWARD button.Then installation of updates got over and it asked me to restart machine. I restarted machine but on OS selection screen,when i selected Ubuntu it didn't boot Ubuntu but instead machine restarted again. I'm not able to boot into Ubuntu.
I already checked the preferences of UM but the filtering is somewhat awkward -- i.e. you have choice to EITHER install silently security updates OR be notified about all updates. One does not exclude the other, but for UM apparently it does.
But I have similar yet different need -- be notified about ONLY security updates (so when I click to show the updates, I will see only them). The rest of the updates should be ignored -- unless the update is required by the other, security update package.
It's taken a lot of work, but I have figured out over thecourse of many many fresh installs over the past few days that the kernel updatefrom the update manager in ununtu is breaking my system. This is both for the -22 and -27 updates.Is anyone else having problems with these and/or is there a fix?
View 9 Replies View RelatedI've updated my 10.04 kernel to 2.6.34 on my Asus Eee PC to fix wireless issues. However, the update manager keeps bugging me to "upgrade" to 2.6.32. How do I tell it to ignore this?
View 3 Replies View RelatedI recently installed Ubuntu 9.04 off of a disc and it worked perfectly, however after I downloaded and installed the system updates from the update manager, it stopped working and it won't even see my device. I have a Zonenet ZEW2500 USB wireless adapter.
View 1 Replies View RelatedI am a new user of ubuntu and have found that the Update Manager freezes when I press Install Updates button. what to do next as I am way behind with the updates.
View 1 Replies View RelatedUpdate manager pops up telling me there are new updates, but clicking on the 'Install Updates' button does nothing.However, if I click on Settings, then just close the settings dialog,it then says 'Starting Update Manager' and when that finished, the 'Install Updates' will work, but I have to do this every time I restart the computer.
View 9 Replies View RelatedI changed my internet source from wireless to wired cable which came with a new IP address. Subsequently anytime I try checking for updates from the update manager it still refers me to my old IP address for wireless and here is the results I get:
[Code].....
I just upgraded my storage server to maverick and it seems the 2.6.35-25 kernel doestn like the hardware im using
since im pretty sure its a hardware related problem and the previous kernel hastn the issue im currently booting this old kernel everytime i need the server by hand (using Shift during boot for the grub menu to appear)
well, it narrows down to the following question:
how can i exclude a specific grub entry - in my case the current kernel 2.6.35-25 - so only previous kernels OR future kernels from the next updates will have a chance to boot?