I am using ubuntu on my netbook...
My user ID is the only user and also the administrator of the machine...
Still unable to create another user.
It says "You are not allowed to modify system configuration"
i m not able to create new user account to my new install of 11.2 don't know whether it occured due to update problem or some installation failure. when creation a new profile through yast it gives a warning sub-domain not started and quits however a new user get added through cli but with no profile of its own. that user cant log into gui enviroment and when he/she logs through cli it automatically tranfers it profile to "/"(i.e root) i m using kde4.3
View 9 Replies View Relatedlately i notice that when i add a new user withthe useradd and passwd command, and then try to login using this new account, am being prompted with a message,saying ' you cannot access /home/newuser. that the account doesnot have permission on his home directory. i have even tried go give the user(john) ownership over his home directory with the #chown -R john:john /home/john
View 8 Replies View RelatedI am unable to create a directory as an anonymous user using FTP. Settings are as below mentioned:-
vsftpd.conf
anonymous_enable=YES
write_enable=YES
anon_upload_enable=YES
[Code].....
I am running SLES10 SP2 under z/vm in z9 mainframe box. But I believe this is a linux problem instead of hardware architecture or visualization (Because previously it worked).
I was trying to create a new user account for ftp purpose. However I encountered the following error from YAST code...
I have installed on a remote server phpmyadmin 3.3.1 and mysql 5.1.46 on a centos 5.4 OS.
Any newly created user with phamyadmin is unable to login both from mysql command line (from localhost) and phpmyadmin (localhost and remotely).
No prob when the user is created with mysql command line (from localhost). All of the users created with phpmyadmin, are not "visible" recognized from the show user command via the mysql command line. The setting I used when I create any user was the same as the ones with the mysql command line creation.
The error message I get when accessing from mysql command line (from localhost) is the following: "Access denied for user ... @localhost (using password: yes)"
I wanted to create an user but don't allow it to see the other user's home folder so I made chmod 0750 /home/folder and it worked fine so I went ahead and decided to completely forbid access to the root folder and I had the "great" idea to make chmod 0750 /, and now I'm having problems with wine and other applications, in example I used to have a folder in this address 209.239.114.51/mmgr but now it's giving me errors and if I try to run some applications I got error "There was an error creating the child process for this terminal"
View 9 Replies View RelatedThis netbook only has a user with non-administrative privs on it and root user but I do not have root's password.Is there a way that I can create a new administrative user of change the current user's group so that it can do sudo commands or have more privs?
View 1 Replies View RelatedI want to add 50 new users, not on the server yet I want to add them all to group Accounting - with 1 option, not user by user I want to setup a default password for them all, and have it say something like 'You must now change password or no access will be permitted' Any other options I also want to do once, not for each user?
View 3 Replies View RelatedI have just installed vsftpd on my debain server..I want to know how can I create a new user called mesk as FTP user and set a home page to some folder on my server? I tried this:
Code: Select allhtpasswd -c /etc/vsftpd/passwd mesk but got: cannot create file /etc/vsftpd/passwd.
i have rhel 5.2 and i want to create user using useradd command without creating user home directory and not throwing any warning/error about not creating any home directory.i have tried useradd -u "$NEW_UID" -g <gid> -d "/home/$1" -M "$1"where $1 is user name and $NEW_UID is i am calculating.it throws error as useradd: cannot create directory /home/$1which i dont want to come , how to prevent this?
View 1 Replies View RelatedI've been looking for this feature for months and couldn't find a solution for this. Does anyone know how to create users and limit the user to a specified directory?
View 6 Replies View RelatedI have a network set up that has been working for around a year with no problems but has now developed a login problem. The system was set up with a main server with all users on it and another PC located elsewhere that people could log onto using there personal login and password that then gained access to the account on the main server. This remote PC has now got the problem. When you try to log onto an account it comes up with the message "your session has lasted less than 10 seconds. If you have not logged out yourself this could mean there is a installation problem or that you are out of disk space."
Error message says that no profile for the user can be found and it couldnt create per-user gnome configuration directory. I can log on as root onto the remote PC as it is obviously a local account but all the account on the main server are not accessible. From the root account I can see that the connection to the server is OK and I can actually log into the accounts on the server using the failsafe session so the physical network is OK.
I never built or designed this set up and to be honest I normally work with windows so its all a bit strange to me. Both PC's run Centos 5. I have checked the messages log and there doesnt seem to be any indication of a problem. Just that it stopped connecting from the remote PC. The accounts are all active on the main server itself and have no problems being accessed.
no need to say i'm new to it so, do i have to create a new user for security reasons in ubuntu lucid?
when i run wireshark it prompts it is dangerous to run as root so what do i have to do?
I want to try out KDE on Lucid, but I don't want to install KDE on top of ubuntu, because I will end up with two sets of applications and software that is gnome specific to load in the KDE environment.SOOOOO, I want to create a separate user that is only KDE and a user(my current one) that is only gnome. Different names, different environments and applications.
Also, if it is possible, I will need instructions to remove a user as well, so in the future I decide which one I like better, I can delete the other user account.
how can I create a new user account?
View 2 Replies View Relatedi have changed the home folder of the administrative user i cant create new users .
View 1 Replies View RelatedAny idea how to "repair" "the configuration server" ? I'm only a month into Ubuntu and I have this fatal inability to create a new user from the Gnome GUI. For any new user I create, I get the following fatal errors upon rebooting and trying to log in to that user.
- Purple clouds for about a minute.
-- then --
- Could not update ICEauthority file /home/user_encrypted/.ICEauthority
- There is a problem with the configuration server.
- (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 256)
-- then --
- Nautilus could not create the following required folders:
- /home/user_encrypted/Desktop, /home/user_encrypted/.nautilus
[Code]...
When I create a new desktop user(i.e. without administrative privileges), I am given the option of letting him have the ability to connect to wired/wireless networks or not. Should I let a normal user have this privilege? Are there any security issues if I let him connect to wireless networks?
View 2 Replies View RelatedIs it possible to create Guest user in ubuntu 10.04 and when I log out from Guest user or turn of computer, it will not save anything.
View 2 Replies View RelatedI want to create a limited user, such that the user should only have the access to usb drives, cd drives and internet. And also I want to restrict the user from deleting the files from the system. How to do it..?
View 5 Replies View RelatedI have a good question. I have a friend that lives in an area where he cannot receive DSL or Cable internet. He has a phone line, and physically able to get DSL, but the company won't give him service. He has Verizon wireless, but the reception is bad and his service gets dropped too much.
I however, have DSL 3.0Mbps and want to know how I could get him a DSL modem to dial up to my server at my house and receive internet. I know that I would probably need two phone lines to do this, but apart from that.
I'm attempting to install OpenBiblio to give it a test drive. I'm having trouble with one of the first steps within the openbiblio install guide. The step is dealing with MySQL in creating user priveleges to the db created. The step is:
Create an OpenBiblio database user. To do this, login to MySQL under the admin userid and run the following SQL command, substituting obiblio_user and obiblio_password with the userid and password of your choice.
mysql> grant all privileges on OpenBiblio.* to obiblio_user@localhost
-> identified by 'obiblio_password';
When I run the "grant all priveleges" command I receive a syntax error. I've spent some time googleing and it comes up with the same command. There has been a few variations attempted such as 'obiblio_user'@'localhost' but still recieve a syntax error.
Can we create a limited user account in ubuntu like XP where user can not be able to change its networking settings (like changing IPs / enable & disable netwrok interface).
View 9 Replies View RelatedI know this will sound stupid, but we've been tasked with standing up a professional Linux server to run a vendor tool and product on. And my team has never administered a Linux or Unix box before. I know the concepts, but can't find the tools!
How do I create a user-ID? And is there a GUI tool I can fire up from the command line to make some of this easier? We can get to the box, manipulate files, etc. But to this point we're exclusively usint 'root', and I know I need to stop that, and prevent that happening in the future.
now how can i create ftp user id and password and allow them to access only specific directory under the wwwhtml directory.
ftp-0.17-35.el5
vsftpd-2.0.5-16.el5_4.1
lftp-4.0.5-1.el5.rf
actually i am having three different user and i want them to allow three different directory under www/html/user1 www/html/user2 www/html/user3
Is there a way to create a user that will not show up in the GDM login screen? This user also needs to have sudo access
View 6 Replies View RelatedI want to create one user without password using useradd command. Is there any way we can do the same? I have googled it but couldn't get the perfect solution
View 1 Replies View RelatedHow do I create a user account without Internet access?
View 8 Replies View Relatedi know the subject is hard to understand but i did my best with it. the problem: i have 2 HDs on my Ubuntu OS, the first is 1TB and the other is 500GB, i want to do a backup with rsync from my 1TB HDs (in with the Ubuntu is on it) to the 500GB.
on the 500GB i have a partition called Backup. what i did: i have created a user crontab that dose two things: 1. mount the Backup partition from the 500GB to a folder called /~/Backup on my home directory which is on the 1TB HD.
2. i wrote the proper rsync command for the backup to go.
[Code]...