Ubuntu :: Transmission Daemon - Web Interface Unavailable After Reboot
Jun 22, 2011
I've installed transmission-daemon on my headless Ubuntu 11.04 server and use the web interface to manage it. This is all working fine. However, after a reboot it seems that transmission daemon starts but the webinterface is unavailable. I get this in the syslog after a reboot:
Code:
Jun 22 10:54:27 localhost transmission-daemon[703]: Transmission 2.31 (12441) started (session.c:706)
Jun 22 10:54:27 localhost transmission-daemon[703]: RPC Server Adding address to whitelist: 192.168.*.* (rpc-server.c:805)
Jun 22 10:54:27 localhost transmission-daemon[703]: RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/transmission/ (rpc-server.c:982)
Jun 22 10:54:27 localhost transmission-daemon[703]: RPC Server Whitelist enabled (rpc-server.c:986)
Jun 22 10:54:27 localhost transmission-daemon[703]: RPC Server Password required (rpc-server.c:989)
Jun 22 10:54:27 localhost transmission-daemon[703]: Port Forwarding Stopped (port-forwarding.c:181)
Jun 22 10:54:27 localhost transmission-daemon[703]: UDP Failed to set receive buffer: requested 4194304, got 262142 (tr-udp.c:75) .....
I can only access the Transmission web interface while the Transmission-gtk client is running. When I close it, the web interface is no longer available. I try to manually start the transmission-daemon, but the process never shows up as running.
I have installed transmission on a headless server. I am using transmission-daemon and connects to the webclient on the LAN. However from WAN I can't connect. I have forwarded port 9091 in my router and it connects with the server, but I get 403: Forbidden.
i installed transmission on my fedora14 VPS for headless usage by "yum install transmission transmission-daemon", problem comes when i try to configure the init.d Scrip for transmission-daemon to run as a different user instead of the pre-specified user �transmission�,how should i modify the default transmission-daemon file bellow?
I would like to be able to simply run a shortcut file or batch file in a windows os to start or stop my transmission-daemon.I was thinking about using putty to auto login and execute a file using the -m switch. A problem I am running into is that /etc/init.d/transmission-daemon stoprequires the use of sudo.That would require entering a password which would be automated and insecure or would require manually typing int he password.
I have the Shorewall firewall running on Ubuntu 10.10 server and the issue I am having is the firewall is blocking traffic from my transmission-daemon even though I have allowed it in the /etc/shorewall/rules.
as you can see, Shorewall is rejecting packets with source and destination port 51413 on incoming net2fw and outgoing fw2net even though the rules are set to accept.
I am having slight issue with setting up file sharing. I have a windows 7 pc and hp proliant microserver running. I have a raid array which I am using as a share for storing music, pictures etc. When I reboot the debian server I can't connect to the server from the windows 7 PC (I have mapped a network drive) until I go on to the server and restart samba with /etc/init.d/samba restart - then everything works fine. I can ping the server with both ip and hostname but the network drive does not connect - this is straight after a reboot. Is the /etc/init.d/samba restart doing something differently to when the server boots? I have read several posts relating to printer sharing issues which point to samba not starting before cups so I am wondering if samba is starting before some of the relevant networking services.
I have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:
root's password: lo Interface doesn't support scanning. eth0 Interface doesn't support scanning.
I tried a remote reboot via ssh. I couldn't log back in even though sshd is a startup script, because the KDE daemon wanted me to enter my kwallet password...which is of course part of the DE, not something accessible via ssh. How do I turn off that check or automate it?
My problem now is that lsyncd does not automatically start if the server reboots. I need lsyncd to start automatically also using the --delay 5 option.
I've had trouble finding any info on this other that some Japanese sites (I cant read japanese) using chkconfig, although it didn't work as I think chkconfig is depreciated anyway.
Is there any web interface that I can install to remotely reboot ubuntu? It would only be accessible via a VPN or on the LAN so not too much worry over security.
running fc10 in a vmware setup Added /etc/sysconfig/network-scripts/ifcfg-eth0:0 to create another interface and all works fine (IPADDR=10.99.56.98). Would you expect this to be available after a reboot, last reboot I had to run ifup eth0:0
I am applying a virtual interface (eth0:0) which is failing after the system reboots. It actually cause the default interface (eth0) to fail as well, I must manually go in and remove the configuration for the eth:0:0 and restart the network to get it running again. How do I successfully add a Virtual interface to Fedora 11 that will stick when rebooted.
I have installed Fedora 14 about 4 days ago. I have set all the networking parameters like dns path, hostname etc. I have also ensured that I select the check-box for "Enable automatically when system starts" for eth0 interface. But weirdly, whenever I boot my system(or restart), I see that the interface eth0 is disabled. I have to manually enter as root and enable it, each time I boot/reboot my system. Why is this happening? Could you please suggest a way so that I have eth0 interface enabled always when I boot up?Also, my domainname also is not boot-persistent. What steps should I take to ensure that the domainname set once persists across reboots?
I'm configuring an HP Mini 110 (wireless BCM4313) to use it as a small Access Point (ad-hoc mode).
I want to make my configuration reboot friendly. With what I have right now, as soon as I reboot the laptop, the wireless interface configuration isn't correctly setup. I have to do "ifdown eth1; ifup eth1" manually.
Here is what I have in /etc/network/interfaces for the wireless interface code...
So the question is how can I avoid having to bring down and up the interface?
I'd like to upgrade my 9.10 desktop to 10.04 but I can't get past step 1.I've done alt-f2 and issued update-manager -d, but no "New distribution" option is presented.I've clicked the "check" button and updated all my repo information but that doesn't help.I've done a wireshark trace and observed that the update-manager's requests get through the corporate firewall, and responses come back.Somehow it determines that no new distro is available.I'll explore further if someone could help me out with getting hold of the relevant update-manager source code.
I have had ubuntu installed for a few months now and have been loving it. Yesterday I wanted to get JDK installed for a found a forum that said how to install it on ubuntu. The installation was not a success (I am not sure why because I am not skilled when it comes to the command line and I didn't understand the error). Later, I tried to install a different application just through the ubuntu software center and it said it was waiting for a different software manager to finish. I didn't understand what was still running because I had all other applications closed that I know of.
Once I restarted the problem was the same. Then I found a bug where people had the same problem with the software manager and they entered this and fixed it: sudo dpkg --configure -a Now whenever I try to apt-get anything I get: E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable) E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
Today when tried to install a software from the terminal...d command dint work. Check this.
calvin@calvin-desktop:~$ sudo apt-get install pidgin [sudo] password for calvin: E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable) E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it? calvin@calvin-desktop:~$
It says that it cannot get lock! I have installed ubuntu along with windows! and drive E: is in windows.
I just had an ATT Uverse RG installed. However my Smoothwall router that previously worked fine with the ADSL SpeedStream is no longer accepting an address assignment DHCP ip address from this new gateway. (3800HGV-B)Any thoughts ideas or experience working with this hardware? ATT only supports Windows and Mac
I am trying to play some of my old dvds, they play in Windows 7, but I get the following using vlc in Fedora 12 (all software in up to date).
[jerry@bigbox Desktop]$ vlc dvd:///dev/sr0 VLC media player 1.0.4 Goldeneye [0x93058b0] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. libdvdnav: Using dvdnav version 4.1.4 libdvdread: Encrypted DVD support unavailable. libdvdnav: DVD Title: OKLAHM libdvdnav: DVD Serial Number: 26654F88 libdvdnav: DVD Title (Alternative): OKLAHM libdvdnav: Unable to find map file '/home/jerry/.dvdnav/OKLAHM.map' libdvdnav: DVD disk reports itself with Region mask 0x00fe0000. Regions: 1 libdvdnav: Suspected RCE Region Protection!!! libdvdnav: Suspected RCE Region Protection!!! [0xb7300710] main input error: ES_OUT_RESET_PCR called [0xb7300710] main input error: ES_OUT_RESET_PCR called libdvdnav: Suspected RCE Region Protection!!! [0xb7300710] main input error: ES_OUT_RESET_PCR called [0xb7300710] main input error: ES_OUT_RESET_PCR called
I have a dual boot Win7/Fedora 12 laptop. I set the region to 1 on the windows side.
I'm working a program to implement a simple multi-process browser. The browser works by having a ROUTER process as the parent of everything else in the program. There's another process called the CONTROLLER which is part of where the user can input information. To tell the ROUTER to make a new tab in the browser the user activates a function from the CONTROLLER to send the create new tab information to the ROUTER:
I have a few updates that I can install using the Update Manager but when I click the "Install Updates" button I get this pop up window message E: Could not get lock /var/cache/apt/archives/lock - open (11: Resource temporarily unavailable) E: Unable to lock the download directory How to get the updates?
I have a dual-boot setup with Ubuntu and Windows 7, sharing an NTFS file system.If I create a new folder (called "newfolder") in the root of my Windows 7 partition, with a text file called newtextfile.txt, and then create a symlink in Ubuntu with ln -s /media/S3A8115D003/newfolder.I can then see, read and edit "newtextfile. txt" from Ubuntu, until I log out and reboot.After I reboot, the symlink to newfolder still appears to be there but when I try to access it, I get This link cannot be used, because its target "media/ S3A8115D003/ newfolder" doesn't exist.However, if I first navigate in the file manager to the Windows folder S3A8115D003/ newfolder and view its contents, then the Ubuntu symlink appears to be healed.How can I make the symlink work without first having to touch the target file with the file manager?
I decided to have my laptop with dual boot. Already having Win7, I tried installing Ubuntu on another partition. While installation was in progress, during the step where we manually choose partitions to install ubuntu on, I was asked to provide a swap area for ease of operation. I provided another active partition for this supposing that this "swap area" is needed only during the installation. Unfortunately, as I found out later that this makes that important active partition to be unavailable to work upon both in windows as well as Ubuntu. I need to use this partition again.
I tried the "disc utility" in System--->Administration section to change the partition type to "hpfs/ntfs". After a longtime it showed me error (Unable to perform the operation). What could have gone wrong? I absolutely need that drive back, as it contains valuable media files.
