I have followed the guide here on the forums, and still can't get much to show up when running "sensors" from within terminal.This is all that will show up when I run 'sensors' in terminal:This has me puzzled, as I followed the guide exactly as it was stated, and I can't get everything working. Is my hardware too new or something?
View 3 RepliesI'm not too sure if this is the right topic to post in but if it isn't please move it to the correct topic. I recently opened some ports for my Playstation 3 and the connection test on the PS3 tells me that the ports are open . But when I execute this command
nmap -p 0-60000 192.168.1.5 I get this
Quote:
Starting Nmap 5.21 ( http://nmap.org ) at 2010-10-16 20:54 AUS Eastern Daylight
Time Nmap scan report for PS3 (192.168.1.5)
Host is up (0.00063s latency).
All 60001 scanned ports on PS3 (192.168.1.5) are closed
MAC Address: **:**:**:**:**:** (Sony Computer Entertainment)
Nmap done: 1 IP address (1 host up) scanned in 4.12 seconds
I could be executing the wrong command or something but I have read through the manual and couldn't find anything that helped. I have tried this command on other machines that I have opened ports for and get similar results except for a few Ephemeral ports (80,443 etc.) which also makes me wonder why these aren't listed as open on the PS3?
I am working on a server which connected to two EMC storage box. when i am checking the multipath information of a disk its showing as 8 paths. how to understand 8 paths for a single disk.
[Code]....
I have an apache2 php5 on an ubuntu 10.04 it was working fine except today and does not open web site now. I tried to open phpinfo.php but it takes long time and at the end it loads php informations just until date module. I installed php5-cli to find out what does not work properly then I used:
Quote:
# php5 -i
PHP Deprecated: Comments starting with '#' are deprecated in /etc/php5/cli/conf.d/mcrypt.ini on line 1 in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/gd.so' - /usr/lib/php5/20090626+lfs/gd.so: cannot open shared object file: No such file or directory in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib
[Code]....
I'm trying to write a program which would get information from a webpage and display the information on my desktop sort of like a widget. I kind of remember there being something like this already made, but for the life of me I can't remember what it's calledDoes anyone know?
View 1 Replies View RelatedHow would you make NIS user information override local user information on client systems? This is what I think is right? Add nis on the passwd registration file on the second line Is this correct?
View 1 Replies View RelatedI would like to know when usb inserted, its showing cant mount when i clicked details its showing bad blocks in beginning , and smething in /dev/sd6. Can i knw why usb drive cant be mounted automatically , even if its set to do so, and to cope the error mentioned above
View 1 Replies View RelatedHaving one issue with evolution not showing html websites showing up in email like verizon sending a promo. I have gone to edit, preferences, mail preferences, html messages and have always load images from the internet chosen. I have also added sender to contacts. Even if I right click message and tell it to dload images it doesn't.
View 1 Replies View RelatedWhen I try to connect a projector to my laptop (already running) and hit the fn+f7 (the designated button for switching screen), nothing happens. I see "no source found" on projector screen and my laptop screen works perfectly. Now if I restart the laptop with the projector connected, I see all the intial booting messages on the projector screen (not on my laptop), then the gnome login screen appears on both the projector screen and laptop (when the login screen appears on laptop it looks like it has lower resolution than my usual laptop resolution). But immediately after I log in, my laptop screen goes blank, and projector screen becomes the only active screen.
If I restart without the projector, again all normal operation on laptop screen is restored.
I feel like I am missing some very silly options. Any help is appreciated.
Here is the output of xrandr when the laptop is connected:
Code:
I'm wondering why I'm getting different information about my cpu from different sources within Ubuntu? Is it giving different units of measure or something? But both say MHz.
Code:
:~$ cat /proc/cpuinfo
processor: 0
vendor_id: AuthenticAMD
cpu family: 15
model: 36
model name: AMD Turion(tm) 64 Mobile Technology ML-34 .....
I recently come across some bug reporting things. I know what is bug but don't know how to use bug information that i got . can anybody explain it for me .
View 3 Replies View RelatedI have changed my Compiz profile to enable the cube in unity and I'm worried about using anything beyond the basic cube. I have not found any information about using 3d windows or other cube effects , so I was wondering if anyone was doing this with Unity ?
I use the cube as mainly a workspace switcher but it would be nice to know how to enable the other effects without breakage , a guide would be nice and I realize Unity in 11.04 is new so it may take time before a guide/ work arounds will be posted.
When I run apt-get command I get some errors. For example this:
Code:
mahmood@localhost:~$ sudo apt-get update
apt-get: /usr/local/lib/libstdc++.so.6: no version information available (required by apt-get)
[code]....
Question? Where can I find information about copyright?
A real state agent took one of my pictures from facebook to use it for his bussiness. He charges 2.5% for marketing.
Iam setting up a HTPC system most advanced thing is 1080p playback with XBMC, Surf, Flash sites, Home server.
Hardware is
CPU AMD 4850e 2.5 ghz dual core
GPU msi Nvidia 210n
RAM 4 gig
Memory 5 terrabyte
sound realtek HD
I have searched around on google and find no new information on the pro and cons for the keramic koala 9.10 64 bit system.
how can I use sar in order to get information about the scheduling?
View 1 Replies View RelatedI'm trying to switch over my old server(9.10) data to a different server(10.04). My old server only had 2 drive bays, whereas my new one has 4. I already have my new server up and running(for the most part), and want to add the old hard drive to it. How would I do this without losing any information. I believe even my old drive is formatted to ext4. I was going to just throw it in there, but I'm afraid of losing information as I really don't want to lose a 1tb of info. I did try to search, but my title had too many common words in it.
View 4 Replies View RelatedI am running a cli only based laptop for a special project; however, is there any terminal based simple text or GUI applications that will give me power remaining and other information about the battery? Looking for: power remaining, total power, WATTS, AMPS, etc.just the basic items and some other items, nothing to fancy.
View 1 Replies View RelatedI am trying to write a shell script which will give remote system version and list of installed applications and their versions as output. In this case remote system is windows xp and I have ip address, username and password of that machine.
View 2 Replies View RelatedWondered if anyone had a fix for this bug? I have been successfully updating my PC daily, however every now and again i get the warning triangle in the top right hand corner stating Update manger even thought updated almost daily reports "The package information was updated 26 days ago".
I have been into synaptic manager and slected best server for my updates and then i go into update manager and update the system, however, it doesnt solve it.
Could not initialize the package information An unresolvable problem occurred while initializing the package information.Please report this bug against the 'update-manager' package and include the following error message:'E:Encountered a section with no Package: header, Eroblem with MergeList/var/lib/apt/lists/in. archive. ubuntu.com_ubuntu_dists_lucid-updates_universe_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.'
View 1 Replies View Relatedwas trying to install cairo dock and I'm not sure what happened but when I attempted to open the update manager I got this message,"An unresolvable problem occurred while initializing the package information.Please report this bug against the 'update-manager' package and include the following error message:'E:Type 'wget' is not known on line 63 in source list /etc/apt/sources.list'"
View 4 Replies View RelatedI just installed Ubuntu 11.04 a couple days ago. I went to system settings, double clicked update manager, and this came up: could not initialize the package information an unresolvable problem ocurred while initializing the package information please report this bug against the 'update-manager' package and include the following error message: 'E:Type'-2011-05-10' is not known on line 1 in source list/etc/apt/sources.list.d/medibuntu.list'
What does this mean?
I know that you can add data to disks already holding informationusing apps for windows without blanking the entire disk first. Unfortunately I haven't found a way to accomplish this with BraseroDisk Burner. Am I overlooking something, or do you have to use acompletely different application in order to do this in Ubuntu?
View 1 Replies View RelatedHow would I use cut or grep to take this line :
Code:
Load......................... 198 Watt(22 %)
and make it into this information, in a text file :
Code:
198 Watts
If you don't mind, please explain the process, as I have been trying to figure this command out, and I must be missing something.
Just upgraded to Ubuntu 11.04.
I have a couple of programs that appears to start but doesn't start, ie the spinning wheel goes for a while.
One of the is Gambas 2.
Installed from Ubutu software center.
How do i get Ubuntu to display what the program does/does not/is missing etc
my guess is that its properly a library or something missing.
I readded all my sources and ppa's on the upgrade but now they are disabled? Also I have a malformed line..Why would they be disabled if I changed them all one by one through software sources?
Error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. report this bug against the 'update-manager' package and include the following error message: 'E:Malformed line 56 in source list /etc/apt/sources.list (dist parse), E:The list of sources could not be read.'
I am willing to learn. I purchased and am currently reading The Official Ubuntu Server Book, and I think I have found my first side project. First, the book said Ubuntu Server is pretty much coded with a scripting language called Python. I want to define the different init levels of my server. I want to define like init 5 to have a GUI interface, just for kicks. A GUI might come in handy when doing certain things in Ubuntu Server, I just don't know, simply because I've been working on the command line. So my first question is, do I need to learn Python to script in Ubuntu Server? I have very little experience coding let alone scripting. The book has example of Upstart scripts, but I was wondering if the language is Python?
So I guess my question is a general question to scripting If I were to focus my time in learning Python as well, would I be able to customize/utilize more of Ubuntu Server? I'm not exactly sure what to learn/read as well to this. I'm trying to broaden my horizons, and I've decided to experiment with Ubuntu Server.
I have some output on the console on the gnome-terminal.
View 2 Replies View RelatedSome mp3 songs will have track informations like website address etc etc..How to remove those information...?
View 2 Replies View Related